|
| 1 | DSR 2023 ITEMS NO. 21.1.1.2 |
| 2 | 21.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved makeconforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelingand dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.2 Powder coated aluminium (minimumthickness of powder coating 50 micron) |
| 3 | DSR 2023 ITEMS NO. 21.1.2.2 |
| 4 | 21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.2 Powder coated aluminium (minimumthickness of powder coating 50 micron) |
| 5 | DSR 2023 ITEMS NO. 21.3.1 |
| 6 | 21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) |
| 7 | DSR 2023 ITEMS NO. 21.8.1 |
| 8 | 21.8 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 21.8.1 Upto 5mm depth and 5 mm width |
| 9 | NON DSR Annexure 01 |
| 10 | Providing and fixing of Automatic Sliding 10mm thick clear toughened glass door of approved make fixed with DORMAKABA (ES 200 TYPE B)/OZONE operator or equivalent approved complete in all respect as per approved .The operator mechanism should compliant with future European standards and produced according to the guidelines for power operated windows, doors and gates, BGR 232, the UVV and the VDE regulations. TÜV design +tested for durability of I Million Cycles, tested according to the low voltage guidelines, fulfils DIN 18650 standards for framed glass door application with dormakaba ST-G Profiles Systems, modular design including internal cover, 2 Nos sliding door panels and 2 Nos fixed panels, both sliding & fixed panels with dormakaba ST-G framed profile or equivalent suitable for 10 mm glass thickness. Operator length should be compatible to have clear opening of 1500 mm (+-100 mm) and clear passage height of 2100 mm or 2400 mm as per suitability including micro processor controlled drive unit, with self learning mechanism,program selector with knob, motion detector (eagle 6 radars, 02 no's), mechanical components, toothed belt, cover profile, floorguide for frame less glass, glass clamping rail, safety device- light barrier, electromechanical lock, body finish: standard silver anodised, 10 mm toughened glass, civil work for the installation of the automated door, covering the space with 10 mm glass left out after the installation of door (fixed portion and openable portion) all complete as per the site conditions as approved by the Engineerin-Charge. |
| 11 | NON DSR Annexure 02 |
| 12 | Providing and fixing 12 mm thick frameless toughened glass panelling of approved make for partition/panelling works, including providing and fixing powder coated/anodized aluminium base channel, top channel, side channels or necessary aluminium framework, edge polishing, making holes/notches/cut-outs as required, providing and fixing glazing clips, EPDM gaskets, setting blocks, approved sealant, all fittings and fixtures required for proper alignment and installation, complete in all respects as per approved design and direction of Engineer-in-Charge. |
| 13 | Non DSR Annexure 03 |
| 14 | Providing and Fixing of frosted Glass films on existing window glass or partition glass. Privacy Visibility Pattern Etching Effect Material : High Translucent Plain Frosted : PVC Solar Energy Rejected : Medium Visible Light Transmission : Medium UV Rejection : High |
| 15 | NON DSR Annexure 04 |
| 16 | Dismantling of Shutter /aluminium/two-track sliding window including removal of shutters, cutting of frame, stacking of serviceable material, disposal of unserviceable material within lead, complete as directed by Engineer-in-Charge (Per Window).(inclusive of GST, labour cess, T&P, contractor profit). |
| 17 | NON DSR Annexure 05 |
| 18 | Providing and fixing metallic window lock of approved quality in aluminium/steel window including screws, drilling holes, complete as per direction of Engineer-in-Charge. |
| 19 | NON DSR Annexure 06 |
| 20 | Providing and fixing aluminium window roller wheel of approved quality in sliding window shutter including removal of old roller, minor adjustments, screws, complete as per direction of Engineer-in-Charge. |
| 21 | DSR 2023 ITEMS NO. 9.169 |
| 22 | Providing and fixing 19 mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS : 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-in charge. |
| 23 | DSR 2023 ITEMS NO 9.127.2 |
| 24 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. |
| 25 | DSR 2023 ITEMS NO. 21.18 |
| 26 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). |
| 27 | Non DSR Annexure 07 |
| 28 | Providing and fixing stainless steel pull handle pair of approved make on frameless glass door complete with screws, washers and accessories. |
| 29 | Non DSR Annexure 07 |
| 30 | Providing and fixing patch lock / central lock for frameless toughened glass door of approved make complete with keys, strike plate and fixing accessories. |
| 31 | Non DSR Annexure 07 |
| 32 | Providing and fixing stainless steel / aluminium floor mounted door stopper of approved make complete with screws and fixing arrangement. |
| 33 | Non DSR Annexure 08 |
| 34 | Providing and fixing Zebra blind made of approved quality double-layer polyester fabric with alternating transparent and opaque stripes, mounted on powder-coated aluminum roller and channel, including chain system for raising/lowering and fixing complete with all accessories as per direction of Engineer-in-charge |
| 35 | DSR 2023 ITEM No.13.48.3 |
| 36 | 13.48 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : 13.48.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture |
| 37 | DSR 2023 ITEM No.13.88 |
| 38 | 13.88 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 39 | DSR 2023 ITEM No.13.80 |
| 40 | 13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 41 | DSR 2023 ITEM No.13.82.1 |
| 42 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 43 | Other Misc. work as per DSR 2023 on % Rate basis Rs.61000/- only Please Enable Macros to View BoQ information |
