|
| 1 | DSR/2023/ 2.31 - Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared..(17.60x 0.7418=13.05) |
| 2 | DSR-2023 item NO. 2.25 (A) - Excavating, supplying and filling of local earth (including royalty) by mechanical transport up to a lead of 5 km, also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc., complete. (700.50 x.7418=519.63) |
| 3 | DSR-2023/15.7.4 - Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. In cement mortar |
| 4 | DSR/2023/15.56 - Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.(54.65X0.7418 = 40.54 |
| 5 | DSR/2023/2.1.1 - Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: ::(129.85x0.7418) |
| 6 | DSR/2023/4.1.8/ - 1.4.8 (1 Cement: 4 coarse sand (zone-III) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources) (6812x.7418=5053.14) |
| 7 | DSR-2023/item no. 4.2.3 -Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing : 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) . Rate factor (9895.20x0.7418) |
| 8 | DSR/2023/4.2.2/ - 1:1½:3 (1 cement : 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). (0.7418 X 10357.55 = 7683.23) |
| 9 | DSR-2023/item.5.22A.6 - Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete below plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 10 | DSR-2023/item no.10.25.2 - Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (172.60 x 0.7418=128.03) |
| 11 | (AR) - Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 12.5 in Super structure in Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 12 | AR - Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 12.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 13 | DSR. NO 13.1.1 -12mm cement plaster of mix. 1:4 (1 cement : 4 fine sand) (347.05X0.7418 257.44) |
| 14 | DSR/23-13.80 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (156.05x.7418=115.76) |
| 15 | DSR-23/13.46.1 Finishing walls with Acrylic smooth exterior paint of required shade 13.46.1 New work (Two or more coat applied @ 1.67ltr/10sqm over and including priming coat of exterior primer applied @ 0.90 litre/10sqm) (160.6x0.7418=119.13) |
| 16 | DSR/2023/13.48.3 - Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture ( 0.7418 X 170.70= 126.63) |
| 17 | AR - Construction of Granular sub base by providing close graded material (53mm-9.5mm=50%, 9.5mm-2.36mm 20% & 2.36mm below 30%) mixing in a machanical mix plant at OMC, Carriage of mix materials to work site, spreading in uniform layers with mortar grader on prepared surface and compacting with vibratory power roller to achieve the desire dencity complete as per clouse 401. MORT&H Analysis |
| 18 | DSR/23/16.91.2 - Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineer in-Charge. 80mm thick Cement concrete paver block of M-30 grade with approved colour, design & pattern. (1091.50x0.7418) |
| 19 | DSR-2023/item no.7903 -Deduction of usable material - Bricks (124.96 x 460x 80%) Please Enable Macros to View BoQ information |
