|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 2 | Demolition of un reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified |
| 3 | Glazed ceramic coloured (colour & shade as approved) tile 450x300x7 mm thick on vertical surface such as skirting / dado set and jointed in neat cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white/ coloured cement with pigment to match the colour of tiles complete all as specified. |
| 4 | Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match & including 20 mm thick screed in cement mortar (1:6) and pointed in white/ coloured cement with pigment to match the colour of tiles complete all as specified. |
| 5 | M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 20mm thick in CM 1:6 complete all as specified and directed. |
| 6 | All as per item No 5 here in before but as in skirting laid over and including 10mm thick backing coat of cement mortar (1:4), complete all as specified and directed. |
| 7 | M&L Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick in CM 1:6 complete all as specified and directed. |
| 8 | M&L for Water proofing treatment to RCC sunken slab as specified below and as directed by Engineer-in-Charge. :- (a) 15 mm plaster in CM 1:3 with WPC on raised vertical surface(b) Cleaning the surface with wire brush/coir brush, removing lose material like dust partucles, dirt etc. (c) Creating fillet covering of 50x50 mm with polymer modified mortar on the junction of slab and walls(d) Apply first coat of two component modified polymer coating on the horizontal and vertical surface (e) Provision of glass fiber mesh of 2 x 2 mm immediately on above coating (f) Apply second coat of two component modified polymer coating after 72 hr (g) Laying concrete 1:4:8 over the coating as per requirment(h) Refixing the sanitary pipes with the waterproofing tape having bridging ability of more than 1.5 mm (j) Filling the gap between the wall opening and sanitary pipe with non shrink cementitious grout (k) Complete treatment to be carried out by authorised applicator of waterproofing manufacturer.Make:- Dr. Fixit/Fosroc/STP Note:(i) The treatment shall be carried out as per the manufacturers instructions and as directed by the Engineer in charge.(ii) The Plan area of floor shall be considered for payment.(iii) WPC shall be measured and paid separately. |
| 9 | S&F Tubes, 'Medium grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors for Spouts, 25 mm nominal bore |
| 10 | Supply only water proofing compound. |
| 11 | Taking down cement plaster on stone walls of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified. |
| 12 | Rendering 15mm thick in cement mortar (1:6) on any face of stone masonary walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified. |
| 13 | Rendering 10 mm thick cement plaster on ceiling surfaces in cement mortar 1:4 finished fair and even without using extra cement complete all as specified |
| 14 | Preparation of newly plastered surfaces of walls etc., and applying two coats of distemper oil emulsion including chalk whiting preparatory to distempering complete all as specified |
| 15 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) of size not exceeding 1.5 Sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts and removing from site to store or otherwise as directed complete all as specified. |
| 16 | Taking down Shutter exc. 1 sqm and not exc . 2 sqm each |
| 17 | Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified. |
| 18 | Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail MS frame shall be covered with heat moulded plain / coloured PVC \\"C\\"channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the styles & rails with suitable PVC sheet beading and jointed togeather with solvent cement complete all as specified. |
| 19 | S&F Stainless Steel Butt hinges, medium weight, 100 mm long complete all as specified and directed. |
| 20 | Providing and fixing Fancy type Stainless Steel Heavy Duty tower bolts, ISI marked, with necessary screws etc. complete: 200x10mm |
| 21 | S&F 150 mm size Fancy type Stainless Steel Heavy Duty handles, complete all as specified and directed by Engineer-in-charge. |
| 22 | Taking down 15mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specifide. |
| 23 | Taking down 20mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specifide. |
| 24 | Supplying and laying of 20 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings onwalls/ceiling or laying in floors complete all as specified. |
| 25 | Supplying and laying of 25 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings onwalls/ceiling or laying in floors complete all as specified. |
| 26 | Supplying and laying of 32 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings onwalls/ceiling or laying in floors complete all as specified. |
| 27 | S&F Vitreous china squatting pan, Orissa pattern, size 580x440mm white/ coloured with integral foot rests including flush pipe and connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete all as specified. |
| 28 | S&F Vitreous china wash down water closet pan ( pedestal pattern ), white/ coloured including seat & cover, flush pipe, connection to drain and to flushing pipe, anti-syphonage pipe, etc. complete all as specified. |
| 29 | S&F PVC 10 ltr. Cap. valveless syphonic action type, flushing cictern, low level, white/ coloured with inlet, ball valve, float and handle including brackets and connection to pipe etc. all as specified. |
| 30 | S&F in repair bib taps, fancy type CP, screwed for 15mm bore of iron pipe or for brass ferrule and fixed all as specified. |
| 31 | S&F in repair stop valves, fancy type, CP with long shank and cup (concealed type), screwed both ends for 15mm bore of iron pipe or for union and fixed all as specified. |
| 32 | Dismantling of 110/100/75mm bore PVC/cast iron or reinforced concrete drain pipes, jointed in cement mortar/lead joint and taking out of trenches if required /walls including fittings, complete all as specified & directed by Engineer-in-charge. |
| 33 | S & F in repair PVC SWR type 'B' socketed rain water pipes 110mm dia conforming to IS: 4985/ IS: 13592 complete all as specified and as directed. |
| 34 | Fixing only PVC SWR type 'B' socketed rain water pipes 110mm dia conforming to IS: 4985/ IS: 13592 complete all as specified and as directed. |
| 35 | S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 |
| 36 | Fixing only Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 |
| 37 | S&F in repairs 110 mm bore (SWR) PVC Shoes for Rain Water Pipes complete as specified and directed by Engineer-in-Charge. |
| 38 | S&F in repairs 100 bore cast iron P or S trap complete all as specified. |
| 39 | S&F 110 mm bore PVC (SWR) single socketed in any length with rubber ring joints laid in trenches or floor complete all as specified and directed by Engineer-in-charge. |
| 40 | S&F 75 mm bore PVC (SWR) single socketed in any length with rubber ring joints laid in trenches or floor complete all as specified and directed by Engineer-in-charge. |
| 41 | S&F 110 mm bore (SWR) PVC bends any radius complete as specified and directed by Engineer-in-Charge. |
| 42 | S&F 75 mm bore (SWR) PVC bends any radius complete as specified and directed by Engineer-in-Charge. |
| 43 | S&F 75 mm bore (SWR) PVC plain floor trap complete as specified and directed by Engineer-in-Charge. |
| 44 | S&F 125/110 mm bore (SWR) PVC gully trap complete as specified and directed by Engineer-in-Charge. |
| 45 | S&F in repairs plastic water closet (EWC) seat cover white/black closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified.(Make : Commander/ Champion/ shera). |
| 46 | Dismantling of PVC over head water tank of capacity Exc 250 liters & not exceeding 500 liters and removing to store |
| 47 | Dismantling of PVC overhead water tank of capacity Exc 500 liters and not exceeding 1000 liters and removing to store |
| 48 | Dismantling of PVC overhead water tank of capacity Exc 1000 liters and not exceeding 2000 liters and removing to store |
| 49 | S&F PVC 500 liters capacity white in colour with date of fixing & date of cleaning of tripple layer, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position over PCC platform including all fitting such as connection pipe pieces with GI tank nipple for inlet, outlet, washout and overflow including ball valves complete etc. Note : PCC platform where required shall be measured and paid in relevent item in this schedule. |
| 50 | All as per item No. 48 above but capacity of tank 1000 liters |
| 51 | All as per item No. 48 above but capacity of tank 2000 liters |
| 52 | Cleaning of PVC tank of capacity exceeding 250 liters but not exceeding 500 liters by disconnecting from existing GI Pipes line, Flushing out water cleaning and removing of sludge, scale mud etc from wall and floor by rubbing with brushes, cleaning with concentrated hydrochloric acid or caustic soda etc. complete and finally washing with fresh water, reconnection the tank to the pipe line including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc to a distance not exceeding 50 metre and depositing complete with date of cleaning & next date of cleaning all as specified and directed |
| 53 | All as per item No. 51 above but capacity of tank exceeding 500 Litres but not exceeding 1000 Litres.cleaning all as specified and directed |
| 54 | All as per item No. 51 above but capacity of tank exceeding 1000 Litres but not exceeding 2000 Litres.cleaning all as specified and directed |
| 55 | Fixed in repairs PVC water tank cover suitable for 500 litters capacity rotational molded, polythene water storage tank (Cylindrical vertical type) cleaning all as specified and directed |
| 56 | Fixed in repairs PVC water tank cover suitable for 1000 litters capacity rotational molded, polythene water storage tank (Cylindrical vertical type) cleaning all as specified and directed |
| 57 | Fixed in repairs PVC water tank cover suitable for 2000 litters capacity rotational molded, polythene water storage tank (Cylindrical vertical type)cleaning all as specified and directed |
| 58 | S & F in repair ball valves high pressure of Brass with epoxy coated aluminum rod and high density-plastic ball screwed for iron pipes of 20 mm bore pipe minimum weight 210 Grams cleaning all as specified and directed |
| 59 | S & F in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed |
| 60 | Taking down cast iron pipes including fittings by burning out lead joints etc to facilitate dismantling old serviceable fittings/pipes laid in trenches,floors or fixed to walls all as directed including earth work, demolition of PCC / Brick work complete all as specified, for the following sizes of pipes:- |
| 61 | (a) 100 mm bore of pipe |
| 62 | (b) 75 mm bore of pipe. |
| 63 | S&F cast iron sand soil waste or vent pipes (ISI Marked), in any length with or without ears with joints in cement mortar (1:3), laid in trenches, floors or fixed to walls all as directed including making good to match with existing surfaces complete all as specified, for the following sizes of pipes:- |
| 64 | (a) 100 mm bore of pipe. |
| 65 | (b) 75 mm bore of pipe. |
| 66 | S&F in repair, cast iron branch pieces (ISI Marked), single (equal or unequal) ordinary of inverted spigot or socket type complete all as specified,for the following sizes of pipes:- |
| 67 | (a) 100 mm bore of pipe. |
| 68 | (b) 75 mm bore of pipe. |
| 69 | S&F in repair, cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified, for the following sizes of pipes:- |
| 70 | (a) 100 mm bore of pipe. |
| 71 | (b) 75 mm bore of pipe. |
| 72 | S & F in repair CI bends / branch pieces (any radius) for oval access doors complete all as specified for the following :- |
| 73 | (a) 100 mm bore of pipe. |
| 74 | (b) 75 mm bore of pipe. |
| 75 | S&F in repair, CI floor trap with grating including jointing to waste pipe in run lead, dia of outlet 75 mm including floor around to required depth and burning lead joints etc to facilitate dismantling old CI trap and making good complete all as specified. |
| 76 | S & F in repair CI bends / branch pieces (any radius) for oval access doors complete all as specified for the following :- |
| 77 | (a) 100 mm bore of pipe. |
| 78 | (b) 75 mm bore of pipe. |
| 79 | S & F in repairs vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, brass chromium plated perforated waste coupling/ fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and of suitable length, complete all as specified. |
| 80 | S&F in repairs brass chromium plated shower rose of 125 mm size with swivel joint including fixing to steel pipe or union. |
| 81 | Providing and fixing I repair CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. |
| 82 | Providing and fixing in repairs Vitreous China Urinal, Half stall type,white including CP Waste Coupling 32 mm, flush pipe, CP Urinal Spreader and waste pipe complete all as specified. |
| 83 | S&F in repairs stainless steel sink with out drainage board made out of ,304 grade Stainless steel,1.00 mm thick sheet for kitchen with cantilevers connecting union complete. |
| 84 | S&F in repairs 15mm dia brass chromium plated pillar tap with fly nuts fancy type capastan head screwed down high pressure with or without lettered hot or cold with long scewed shank complete all as specified. . |
| 85 | S&F in repairs PVC connection 450mm long with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer complete all as specified. |
| 86 | S&F in repairs chromium plated brass angle valve suitable for 15mm bore pipe, complete all as specified. |
| 87 | S&F in repairs waste fitting (coupling) brass chromium plated 32mm dia for WHB |
| 88 | S&F in repairs PVC flush pipe of 32mm dia pipe for connecting low level flushing cisternicl joitig to WC complete all as specified. |
| 89 | S&F in repairs brass CP Wall mixer for mixing Hot and cold water screwed down for iron pipe all as specified and directed. |
| 90 | S&F in repairs 32mm bore and 75cm long PVC waste pipe for WHB complete all as specified. |
| 91 | S&F in repair health CP faucet with 1.50 metre long Ist quality stainless steel flexible pipe suitble for 15 mm bore complete all as specified and directed. Make : Prayag Cat No |
| 92 | M&L PVC mirror cabinet (440x325x120mm ) and firxed to wall after taking down old mirror all as specified and directed |
| 93 | S&F 15mm dia wash hand basin CP brass mixer as in repair complete. ZIM/GMG/PARKO/SEIKO/Kingston) |
| 94 | M&L soap dish chromium plated brass fixed with brass nuts and screws as in repair complete all as directed |
| 95 | M&L in repaires toilet paper holder brass chromium plated as in repair complete |
| 96 | S&F in repairs mild steel chromium plated grating (round) 125mm dia fixed over floor/nahani trap (with hole and without hole)complete all as specified. |
| 97 | 48. S&F bathroom glass corner of best quality (as per sample) |
| 98 | S&F in repairs towel rail 600mm long 20mm dia aluminium anodised chromium plated fixed with wooden guities embeded in cement mortar (1 : 3) with steel screws etc, complete all as specified. |
| 99 | S&F in repairs 15mm dia wash hand basin CP brass mixer as in repair complete. |
| 100 | S&F in repair 600mm x 450mm bevelled edge mirror 5mm thick of selected quality glass and fixed with chromium plated brass screws and cup washer complete all as specified & directed by Engineer in charge. |
| 101 | M&L for manual Sealing of traps,WCs (manually) with neat cement paste after removal of water from it, to prevent or make up the leakage including cementing in cement mortar (1:3) from inside and outside both & refixing grating, plasters etc complete all as directed and as specified. |
| 102 | S&F in repair, MS clamps for CI pipes 100 mm bore made out of 50mm x 5 mm flat and 16 mm dia round bars, including bolts and nuts and securing to wall in PCC (1:2:4) and making good in cement mortar (1:3) complete all as specified. Please Enable Macros to View BoQ information |
