Tender For Execution Of Various Works Within The Jurisdiction Of The Electricity Distribution Division, Pallavpuram, Meerut—Specifically Covering The Operational Areas Of The Sub-Divisional Officers For Electricity Distribution Sub-Divisions I (Pallavpura, Meerut-Uttar Pradesh
TDR : 55729765
Tender Notice
BOQ
6 Days Left
Meerut
Uttar Pradesh
Tender For Execution Of Various Works Within The Jurisdiction Of The Electricity Distribution Division, Pallavpuram, Meerut—Specifically Covering The Operational Areas Of The Sub-Divisional Officers For Electricity Distribution Sub-Divisions I (Pallavpura
Maintenance Work of Protection of STP/PCC Poles with Plastic sheet, Barricading of T/F (250 to 630 KVA T/F), during kanwar Marg in the area EDSD-I/II/III, under EDD-Pallavpuram, Meerut.
2
Wrapping of STP/PCC pole with PVC insulation sheet (minimum 50 micron), minimum till 7 feet height or as per direction of Supervising Enginner. Colour of insulation sheet will be confirmed by department. Work also includes wrapping of 02 rounds of 2 inch. width retroreflective tape. Along with supply & fixing of A-4 size danger signage stickers (danger signage stickers design will be provided Supervising Enginner.) & providing GPS Photos.
3
Providing and fixing of flexi signage board of size 2 feet X 2 feet. Signage board must be properly binded by frame at edges (flexi signage board language will be provided by supervising enginner.)
4
Strong barricading of distribution T/F with wooden balli (as per direction of Supervising Enginner). Wooden balli must be digged in atleast 2 feet inside the earth. Barricading must have horizontal bracing of wooden balli atleast 04 Nos on each side and providing diagonal bracing in-cross on each side. Along with supply & fixing of A-4 size danger signage stickers on each side.(Danger signage stickers design will be provided by supervising enginner.) & providing GPS Photos.
5
Carriage of following material from store center PVVNL to site & vice-versa of work including loading & unloading at both ends maximum distance up to 100 Km. as per direction of Supervising Engineer.
6
Line material such as HT/LT Cross Arms, HT/LT pin insulator, HT/LT pin, HT/LT disc insulator with fitting, stay rod, stay wire, LT AB cable, conductor, GI wire, Earthing, J Hook, GI wire for guarding, MS Nuts & bolts, suspension clamp etc.
7
Earthing of each HT/LT line pole & T/F properly after drive of electrodes if size 20mm x 250 mm and connection the earthing point with GI wire. (as per UPPCL Respo).
8
Guarding of line with G.I. wire having 2 no. horizontal wire & 3 Mtr distance odf laces of ten 6 SWG/8 SWG G.I. wire complete work in all respect (as per UPPCL Respo).
9
Open the binding & resagging of existing HT/LT line.
10
Straighting Tilted pole & resagging of conductor/cable after opening the binding and making properly (as per UPPCL Respo). Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
