|
| 1 | Providing and Fixing submersible pump set of 20 HP and 15 kW, Head Range-30-51 Meter, Stage-3 Flow Range-1900-1050 LPM Bore Size-100 mm, Phase-3as per the direction of Engineer-in-charge. |
| 2 | Rewinding of borewell submersible pump set of 20 HP and 15 kW, Head Range-59-18 Meter, Stage-3 Discharge Range-0-2700LPM Bore Size-2200mm, Phase-3, and repairing of minor defective parts cartage from site to workshop and back to site including labour charge etc. as per entire satisfaction of engineer in charge |
| 3 | Providing and Fixing submersible pump set of 1.5 hp 220volt 50 HZ head range 22-28 m discharge120 lpmwith delievery 25mm as per the direction of Engineer-in-charge. |
| 4 | Rewinding of open well submersible pump set of 2/1.5 HP Single phase, 1.5KW, suction and delivery 65x50mm, 440 volts and repairing of minor defective parts cartage from site to workshop and back to site including labour charge etc. as per entire satisfaction of engineer in charge |
| 5 | Providing and fixing 20-33Amp over load Relay BCH/L&T make of Sta- delta fully automatic starter D.O.L starter labour charges including charge, cartage etc. as per the direction of Engineer-in-charge. |
| 6 | Providing and fixing MNX-40 3 Pole Power contactor L&T/BCH make of Star delta fully automatic starter including charge, cartage etc. as per the direction of Engineer-in-charge. |
| 7 | Providing and Fixing single phasing preventor Auto Switch suitable for direct online and star delta starter of make Jetson Technology/L&T or equivalent including making connection to exsiting starter panel etc. complete as per the direction of Engineer-in-charge. |
| 8 | Supplying and laying PVC insulated and PVC sheathed copper conductor submersible flat/round waterproof cable of approved make for wiring of underwater fountain lights etc. all complete as per direction and entire satisfication of engineer-in-charge. Cable of size 6mm 3 core |
| 9 | Providing and Fixing sump cover of SS frame of angle size 25x25x4mm and using SS Perforated sheet 3mm thick for avoiding leaves and other material to enter in the sump etc.complete as per the direction of Engineer-in-charge. |
| 10 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface. |
| 11 | Thematic Painting mandala, Madhubani/Rajisthani/steet Art by an Artistic painter pattern like boxes line diagram, themes and writing swachchta slogans and any types of figure etc with high glow finish on walls including labour, Painting brush up to 10 metre height including proper sitting/standing, scaffolding arrangement itself and including, sand papering, scratching, preparing the surface complete as per direction and entire satisfaction of engineer in charge. . Nothing shall be paid extra on Account of sand papaers brushes and rollers etc. theme and design of art shall be approved by the Engineer-in-charge at the time of the excution of work. etc. complete. |
| 12 | Providing and placing SAND STONE GARDEN BENCHES of required shape, size, colour, thickness etc. complete in all respect at site as approved and as per direction of Engineer-in- Charge. |
| 13 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 14 | Painting with epoxy paint of approved brand and manufacture to give an even shade Two or more coats on old work |
| 15 | Supplying 1\\"(25mm) hose pipe for garden purpose for filling water in the founatins or empty the founatin etca as per direction of engineer in charge. |
| 16 | Maintenance, Cleaning and Reparing of 02 nos Fountains in Children Park by deploying manpower i.e Belwar for cleaning and Electrician for repairing of all minor electrical and mechanical system of pump sets, electrical panels and fitting/fixtures/waterpipe etc. complete as per direction, instruction and entire satisfaction of Engineer-in-charge.in general shift 8 Hrs. i.e (10.00 AM to 06.00 PM ) once in a week or as per schedule prescribed by Engineer-in-charge. |
| 17 | Providing and fixing retro reflective sheeting grade-XI as per ASTM-D4956-07 in single layers of approved colour over ACM/Aluminium sheet complete with necessary adhesive and pressure method etc. The sheet layer of Type-XI sheet shall be on full face of ACM/Aluminium sheet with words/directions,pictogram (picture), arrows , sign shall be printed over sheet through digital print system of approved make complete including cleaning etc. complete, all as per drawing and direction of Engineer-in-charge. (Payment shall be made for flat area of sheet only.) |
| 18 | Providing cutting hoisting and fixing in position including fabrication of 3mm thick Aluminum Composite material sheet (ACM) made of two aluminum sheet of 0.25 mm thick each having a distance of 2.50 mm thick filed with rubber polymer to the entire satisfaction of Engineer – in- charge. Confirming to various concerned ASTM Standards. (Measurement to be taken of the face area of sheet). |
| 19 | Providing and fixing in position high bond (VHB) double tape 24 mm wide 2.3 mm thick for jointing ACM/Aluminium sheet with S.S frame including all processes like cleaning, cutting, chemical application pressing etc. as per sample approved by the Engineer-in-charge. Please Enable Macros to View BoQ information |
