|
| 1 | SUPPLY, DELIVERY & FIXING OF 11 KV/110 V 3 PHASE 3 LIMBRESIN CAST DRAW OUT TYPE PT |
| 2 | SUPPLY,DELIVERY & FIXING OF 11 KV/6KV, 50/5A, SINGLECORE SINGLE RATION, 15 VA,C1-1 C.T. |
| 3 | SUPPLY,DELIVERY & FIXING OF POWER PACK 600 WATT/800WATTS 11O V DC 3 PHASE FOR PROTECTIONSYSTEM,INDICATION SYSTEM,SPRING CHARGINGMOTOR,CLOSING, TRIPPING AND INTERLOCKING SYSTEMPROTECTION RELAY, PUSH BUTTONS, FUSES ANDTRANSFORMERS. |
| 4 | COMPLETE PANEL WIRING BY SUPPLY AND INSTALLATION OF1.1 KV GRADE UNSHEATHED COPPER PVC INSULATION WIRE7/0.029 OR 2.5 SQMM LAYING INSIDE CONTROL CIRCUIT PANELTROUGH PVC FRONT COVER CABLE TRAY WITH ALLNECESSARY INCLUDING NUMBERINGFERULES,SOCKEYING,CRIMPING JOINTS FOR MEASURINGINSTRUMENTS RELAY, POWER PACK FROM CT AND PTINCLUDING SULLY & FIXING OF 2 NOS PUSH BUTTON, 16 NOS6-10 AMP HRC FUSE CARTRIDGE,BINDING TAPE,NUMBERINGFERULES,FLEXIBLE PVC PIPE ETC. THE CT'S SECONDARY CONNECTION SHOULD BE SHORT CIRCUITED & PROPERGROUND EARTH, RECONNECTION OF HT CABLE TERMINALJOINT. |
| 5 | HIGH VOLTAGE TEST BY 9 KV DC(RECTIFIED AC) BY PARTYFOR THE FITNES OF SWITCH GEARS FOR FURTHEROPERATION |
| 6 | NECESSARY CHECKING TESTING OF PT CERCUIT INCLUDINGTRIPPING TEST THROUGH ALL RELAYS. PRIMARY INJECTIONTHROUGH CT AND MEASURED SECONDARY CURRENT OFRELAYS HAS MADE AT SITE IN PRESENCE OF ELECTRICALENGINEER. |
| 7 | SUPPLY AND DELIVERY OF TRIP-NEUTRAL-CLOSE BREAKERCONTROL SWITCH LOCKABLE 66O V, AC 20A FOR HTSWITCHGEAR. |
| 8 | SUPPLY AND DELIVERY OF AMMETER SELECTOR SWITCH 440V AC 10A |
| 9 | SUPPLY AND DELIVERYOF VOLTMETER SELECTOR SWITCH,440V AC 10 A |
| 10 | NECESSARY CHECKING TESTING OF PT CIRCUIT INCLUDINGTRIPPING TEST THROUGH ALL RELAYS, PRIMARY INJECTIONTHROUGH CT & MEASURED SECONDARY CURRENT OFRELAYS HAS MADE AT SITE IN PRESENCE OF ELECTRICALENGINEER |
| 11 | Supplying of the following HIGH TENSION XLPE Cables(make:Polycab/Gloster/Havells): 3Core x 300 sq mm 11 KV(UE)XLPE |
| 12 | Laying through Underground Trech c ) Laying of two cables above185 sqmm in an underground trench in single tier FORmation(Horizontal), the trench size : 680 mm x 760 mm average depth, withbrick protection on the top of each cable 8 (eight) Nos. bricks per Mtr.and 4 (f)our) Nos. bricks per Mtr. as separator between the bricks andcables and also trench to be filled up with shifted soil, levelling up andrestoring surface duly rammed |
| 13 | Compression Glands.Supplying and fixing compression type glandcomplete with brass gland, brass ring & rubber ring FOR dust &moisture(proof entry of XLPE/PVC armoured cables as below: FOR3... core.upto 400 sqmm |
| 14 | Finishing cable ends.(b)Finishing the end of following XLPE/PVCarmoured cables by crimping method incl. supplying and fixingsolderless socket (Dowels make), tapes, anticorrosive paste &jointing materials.3... core 300 sqmm cable |
| 15 | Supply and fixing of 240/230 volt, 50 Hz, T.P., power contactor(Make: L & T/ABB/Schneider/Simence/ GE) having contact block ofthe following range.225-300Amp, 2NO+2NC |
| 16 | Supply and fixing of analog voltmeter ranging from 0-500 V of 144mm sq size (make :AE/KAPPA/IMP). |
| 17 | Supply & fixing of 230/240V, LED indicating lamp (make:AE/KAPPA/IMP) other than Blue/ white color. |
| 18 | Supply & fixing of control switch of 25A, D.P., 415 V of ON/OFF oftype (make :Siemens/ABB/L&T/Schneider). |
| 19 | SUPPLY AND DELIVERY OF MASTER TRIP RELAY TYPE VAJH13,110 V DC |
| 20 | SUPPLY PF MNX 80 CONTACTOR |
| 21 | Sub Total |
| 22 | GST 18% |
| 23 | CESS 1% Please Enable Macros to View BoQ information |
