|
| 1 | Supplying, laying fixing and jointing of 3 core 4 Sqmm of approved quality and best variety conforming to BIS of the following dia including all Charges etc.., Complete |
| 2 | Supplying and fixing of 4 way Modular Box of approved quality and best variety conforming to BIS of the following dia including all Charges etc.., Complete |
| 3 | Supplying and fixing of 16 Amps Switch of approved quality and best variety conforming to BIS of the following dia including all Charges etc.., Complete |
| 4 | Supplying and fixing of 16 Amps Socket of approved quality and best variety conforming to BIS of the following dia including all Charges etc.., Complete |
| 5 | Supplying and fixing of 20 Amps MCB (switch Type) of approved quality and best variety conforming to BIS of the following dia including all Charges etc.., Complete |
| 6 | Supplying and fixing of 32 Amps Fuse carrier of approved quality and best variety conforming to BIS of the following dia including all Charges etc.., Complete |
| 7 | Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40 mm with copper earth plate of size125 mm x 50 mm x 6 mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry |
| 8 | Supplying and fixing 8 SWG copper wire of approved quality and best variety conforming to BIS of the following dia including all Charges etc.., Complete |
| 9 | Supplying, laying and jointing PVC pipes and Specials of approved quality and best variety conforming to BIS of the following dia including all Charges etc.., Complete 1\\" dia PVC pipe |
| 10 | 1\\" dia PVC bend |
| 11 | Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia “B” class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). |
| 12 | Brick partition walls of 11.50cm thickness using best quality Burnt Clay Brick of size 9” x 4 1/2” x 3” with class designation of 7.5 conforming to IS 1077-1992 in Cement Mortar 1:3 (One Cement and Three CS Sand) using hoop iron reinforcement if found necessary including Cost of Mortar Plasticizer, curing etc. complete complying with standard specification and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately) |
| 13 | Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 14 | Painting New Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 15 | Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level 160mm dia PVC pipe |
| 16 | 160 mm dia PVC bend |
| 17 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sill slabs etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner , vertical stiffener, side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid). |
| 18 | Providing and laying in position, standardised concrete Mix M-20 Grade using In-situ Concrete batching plant/ Ready Mix Concrete (RMC) adopting weigh batch method in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete,improve workability without impairing strength and durability with about (5 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10- 12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including Conveyance of concrete from batching plant to Work site, Electricity charges and other works & labour cost involved for concrete production, laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials). |
| 19 | Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors. |
| 20 | Supplying and fixing Mild Steel grills for windows, ventilators etc.,complete complying with standard specifications and as directed by the departmental officers. |
| 21 | Supply and fixing stainless steel parking bollards with following specification etc. complying with standard specification |
| 22 | Supply and fixing of Steam rice boiler unit of 60 kg capacity including all charges and fixing charges in complete complying with standard specification |
| 23 | Supply and fixing of following SS kitchen Utensils and vessels including all charges and fixing charges in complete complying with standard specification SS plate |
| 24 | SS Tumbler 180 ml heavy |
| 25 | SS Sambhar Karandi (Big) |
| 26 | SS Sambhar Karandi (small) |
| 27 | SS Rice Karandi |
| 28 | SS Bucket (Big) |
| 29 | SS Bucket (Small) |
| 30 | Aluminnum Vessel (25 Kg) |
| 31 | 10 Litre Pressure cooker |
| 32 | Steel kadai 10 litre capacity |
| 33 | Transportation charges for vessels Please Enable Macros to View BoQ information |
