|
| 1 | Demolition of cement concrete (unreinforced) of any description & in any portion not otherwise specifically provided for & removal of demolition material to out side from site, complete all as specified and directed. |
| 2 | M&L for Cement concrete work (PQC) in pavement/hard-standing of flexural strength 40kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less, complete all as specified and directed. |
| 3 | Forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’, thickness of concrete 150 to 200mm, complete all as specified and directed. |
| 4 | M&L for plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregates) as in surface channel and drains including necessary form work, complete all as specified and directed. |
| 5 | M&L for forming fair finshed drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/ stopped ends, complete all as specified and directed. |
| 6 | M&L for plain Pre-cast Cement Concrete 1:3:6, type C-1 (using 20 mm graded crushed stone aggregates) as in block masonry with solid blocks, exc 10cm in width and setting in CM 1:6, complete all as specified and directed. |
| 7 | M&L for Plain Cement Concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregates) as in coping including necessary foam work, if required, complete all as specified and directed. |
| 8 | M&L for rendering 15mm thick in cement mortar 1:4 on stone walls or other than fair faces of brick walls fiinished even and smooth without using extra cement, complete all as specified and directed. |
| 9 | M&L for pre-cast RCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregates) cover slabs for manhole slabs (for manholes etc) chullah hoods, chajjas, water toughs, mangers, shelves and similar articles with plain faces set in CM (1:6) & including demolition, complete all as specified and directed. |
| 10 | M&L for mild steel TMT bars 6-8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 11 | M&L for 75mm thick Plain Cement Concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregates) as in sub base of path, hard standing and footpath, finished the surface even and fair without using extra cement, including demolition of old PCC, complete all as specified and directed. |
| 12 | M&L for coloured, pre-polished, premium quality factory made, chamfered edge machine pressed precast concrete interlocking paver block of any shape and size approved by GE confirming to (IS:15658-2006) of 40mm thick, M-30 grade single layer monolithic high density manufactured by electro vibro hydraulically operated block making machine in equal propotion of grey and coloured tile to make a pattern as directed as in hardstanding/path,with grey cement, laid tightly over & including 25mm thick dry sand cushion (compacted) and joints filled with dry sand, colour and pattern as approved by GE and dismantling old existing any description and size paver block, complete all as specified and directed. |
| 13 | M&L for prepolished coloured chequered cement concrete tiles of approved quality of size 30 cm x 30cm x 25 mm thick set, jointed in neat cement slurry in floor and pointed in white or coloured as apporved by GE cement to match the shade of tiles, laid over and including 15 mm thick screed bed in cement mortar 1:4 and dismantling old existing any description and size tiles and bedding, complete all as specified and directed. |
| 14 | M&L for 100mm thick Plain Cement Concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregates) as in sub base of floor, paving etc, finished the surface even and fair without using extra cement, including demolition of old PCC, complete all as specified and directed. |
| 15 | M&L for coloured, pre-polished, factory made, chamfered edge machine pressed precast concrete interlocking paver block of any shape and size approved by GE confirming to (IS:15658-2006) of 60mm thick, M-35 grade, single layer monolithic high density manufactured by electro vibro hydraulically operated block making machine in equal propotion of grey and coloured tile to make a pattern, as in footpath, parks, lawns, drive ways or light traffic parking etc, laid tightly over & including 25mm thick dry sand cushion (compacted) and joints filled with dry sand, colour and pattern as approved by GE, dismantling old existing any description and size paver block, complete all as specified and directed. |
| 16 | M&L for coloured, pre-polished, factory made, chamfered edge machine pressed precast concrete interlocking paver block of any shape and size approved by GE confirming to (IS:15658-2006) of 80mm thick, M-40 grade single layer monolithic high density manufactured by electro vibro hydraulically operated block making machine in equal propotion of grey and coloured tile to make a pattern as directed as in footpath, parks, lawns, drive ways or light traffic parking etc, laid tightly over & including 25mm thick dry sand cushion (compacted) and joints filled with dry sand, colour and pattern as approved by GE, dismantling old existing any description and size paver block, complete all as specified and directed. |
| 17 | M&L for coloured, pre-polished, factory made, chamfered edge machine pressed precast concrete interlocking paver block of any shape and size approved by GE confirming to (IS:15658-2006) of 100mm thick, M-40 grade single layer monolithic high density manufactured by electro vibro hydraulically operated block making machine in equal propotion of grey and coloured tile to make a pattern as directed as in footpath, parks, lawns, drive ways or light traffic parking etc, laid tightly over & including 25mm thick dry sand cushion (compacted) and joints filled with dry sand, colour and pattern as approved by GE, dismantling old existing any description and size paver block, complete all as specified and directed. |
| 18 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortor 1:3 (1 cement 3 coarse sand) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required, including demolition old existing kerb stone, complete all as specified and directed. |
| 19 | M&L for Plain Cement Concrete 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregates) providing roof kerbs or mud stops, leveling course, pedding rounded or chamfered on edges, including demolition of old PCC, complete all as specified and directed. |
| 20 | M&L for preparation of newly surfaces of brick, stone, concrete, asbestos cement or plaster surfaces of any description over, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer, complete all as specified and directed. |
| 21 | S&F in repair 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed Please Enable Macros to View BoQ information |
