|
| 1 | M&L for preparation of old decorated surfaces of walls and applying two coats of white wash, complete as specified and as directed by Engineer-in-charge. |
| 2 | M&L for preparation of old decorated surfaces of ceiling and applying one coat of white wash, complete as specified and as directed by Engineer-in-charge. |
| 3 | M&L preparing of old decorated surfaces of walls and applying two coats of distemper oil-emulsion, complete as specified and as directed by Engineer-in-charge. |
| 4 | M&L for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of primer & putty (1mm thick) to wall surfaces including preparation of old surface of wall, complete as specified and as directed by Engineer-in-charge. |
| 5 | M&L for preparation of old decorated plastered or unplastered surfaces of wall, cornices etc by brooming down or steel wire brushing, scrapping down, smoke soot, moulds, moss, efflorescent and trading oil and greasy spots and applying one coat of cement base paint (white or tinned), complete as specified and as directed by Engineer-in-charge. |
| 6 | M&L for preparation of old decorated plastered or unplastered surfaces of wall, cornices etc by brooming down or steel wire brushing, scrapping down, smoke soot, moulds, moss, efflorescent and trading oil and greasy spots and applying two coats of cement base paint (white or tinned), complete as specified and as directed by Engineer-in-charge. |
| 7 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and as directed by Engineer-in-charge. |
| 8 | M&L for 15mm thick in two layer (10 mm and 5 mm thick) rendering on fair faces of brick work or concrete surface in CM 1:4, mixing with water proofing compound @ 3% by weight of cement consumed and surface finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge. Note :- WPC shall be measured and paid separately. |
| 9 | Supply only integral water proofing compound confirming to IS complete all as per specified and as directed by Engineer-in-charge. |
| 10 | M&L for complete removal of existing treatement on plastered or unplastered surfaces of walls including brooming down or steel wire brushing, scrapping down smoke scoot, mould, moss and efflorescent salt, trading oil and greasy spots and applying two coats of weather coat (exterior grade) over a coat of alkali resistant primer, complete all as specified and as directed by Engineer-in-charge. |
| 11 | M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed by Engineer-in-charge. |
| 12 | M&L for preparation of new plastered surface of wall and applying two coats of cement base paint (white or tinned) over a coat of alkali resistant primer, complete as specified and as directed by Engineer-in-charge. |
| 13 | M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and as directed by Engineer-in-charge. |
| 14 | Material and labour for scrapping and removing of old paint, stain loose material and algae, fungus growth of surfaces by sanding machine and applying two coats of 100% premium acryic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS-15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with Silicon Additives @ 2.43 Litre/sqm over and including priming coat of exterior primer applied @ 2.00 litre / 10sqm by using the auto-roller/airless paint sprayer as specified and as directed by Engineer-in-charge.Note : Preparation of putty and paint must be done by multipurpose mixer. |
| 15 | Material and Labour for preparation for old surfave by sanding machine and filling the cracks upto 1-2 mm with wall putty including cleaning etc, and applying one coat of water resistant primer followed by two coats of acrylic emulsion paint using the Auto roller / Airless paint sprayer as specified and as directed by Engineer-in-charge.Note : Preparation of putty and paint must be done by multipurpose mixer. Please Enable Macros to View BoQ information |
