|
| 1 | M&L for preparation of old decorated surfaces of wall and applying one coat of white wash on walls complete all as specifed and directed by Engr -in-Charge |
| 2 | M&L for preparation of old decorated surfaces of ceiling and applying one coat of white wash on ceiling complete all as specifed and directed by Engr -in-Charge |
| 3 | M&L for preparation newly plastered surfaces of ceiling and applying three coats of white wash on ceiling complete all as specifed and directed by Engr -in-Charge |
| 4 | M&L for preparation old decorated plastered surfaces or un-plastered surfaces of wall and applying two coat of oil emulsion distemper complete all as specifed and directed by Engr -in-Charge |
| 5 | M&L for preparation old decorated plastered surfaces or un-plastered surfaces of wall and applying one coat of oil emulsion distemper complete all as specifed and directed by Engr -in-Charge |
| 6 | M&L for complete removal of existing treatment on old decorated surface of wall and applying two coat of oil emulsion distemper white/coloured over one coat of birla wall care based putty (where it is required) complete all as specifed and directed by Engr -in-Charge Note:- Putty shall be measured and paid seperately. |
| 7 | M&L for preparation of new decorated surfaces and applying two coat of distemper oil emulsion over a coat of putty finish and a coat of alkaline resistant primer complete all as specifed and directed by Engr -in-Charge |
| 8 | M&L for one coat of 1.50mm thick wall care putty on walls/ceiling complete all as specifed and directed by Engr -in-Charge |
| 9 | M&L for preparation old painted surfaces of wood/wood based materials exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specifed and directed by Engr -in-Charge |
| 10 | M&L for preparation old painted surfaces of steel exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specifed and directed by Engr -in-Charge |
| 11 | Taking down cement plaster on brick or stone walls, etc. with raking out joints, hacking for key, scrubbing down with water, etc complete all as specifed and directed by Engr -in-Charge |
| 12 | M&L for rendering 10 mm thick in CM ( 1:6 ) on wall/ concrete surfaces finish even and smooth without using extra cement complete all as specifed and directed by Engr -in-Charge |
| 13 | M&L for rendering 15 mm thick in CM ( 1:4 ) on wall/ concrete surfaces finish even and smooth without using extra cement using WPC compound complete all as specifed and directed by Engr -in-ChargeNote: WPC shall be measured and paid separetly. |
| 14 | M&L for 5 mm thick plaster on ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete all as specifed and directed by Engr -in-Charge |
| 15 | Supply only Liquid water proofing compound complete all as specifed and directed by Engr -in-Charge |
| 16 | M&L for preparation of newly plastered surface and using sand paper to have even and smooth surface and applying 1.5 to 2mm thick JK/BIRLA white putty on prepared surface and applying two coats of weather coat paint (Weather coat Exterior emulsion) manufactured by Berger' or Asain Apex white or tinted over a coat of white water base primer complete all as specifed and directed by Engr -in-Charge |
| 17 | M&L for preparation of old decorated surface of wall and applying two coats of weather coat paint (Weather coat Exterior emulsion) manufactured by Berger' or Asain Apex white or tinted over a coat of white water base primer complete all as specifed and directed by Engr -in-Charge |
| 18 | M&L for preparation of old decorated surface of wall and applying one coat of weather coat paint (Weather coat Exterior emulsion) manufactured by Berger' or Asain Apex white or tinted complete all as specifed and directed by Engr -in-Charge |
| 19 | M&L for preparation of newly plastered wall surfaces up to third floor level and applying two coats of cement based paint over one coat of cement primer, complete in all respects complete all as specifed and directed by Engr -in-Charge |
| 20 | M&L for complete removal of existing treatment on old decorated surface of wall and applying two coats of cement based paint over a coat of cement primer complete all as specifed and directed by Engr -in-Charge |
| 21 | M&L for preparation of old decorated surface of internal wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers and applying two coats of acrylic distemper over a coat of primer make the surface smooth using roller all as specified and prescribed by manufacturer of paint and all as directed at site by Engr-in-ChargeNote:- (i) The old surface must be prepared in a manner so that there should not be any impression of dent and it should be made even and smooth all as per manufacture’s instruction before application of distemper. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted. (ii) All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by department for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture.(iii) After carrying out preparation of surface the same shall be got approved from Engr-in-Charge before applcation of distemper for each building.(iv) The colour / shade will be all as approved by GE/Engr-in-Charge (v) Putty shall be measured separately |
| 22 | M&L for preparation of old decorated surface of exterior wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with dust extraction system for clean environment certified by reputed paint manufacturers, then washing the surface with Bleaching powder solution for treatment of fungal growth and applying two coats of exterior anti fungal acrylic emulsion paint (wallmista of Berger paint or equivalent in Asian paint, Nerolac etc having four years of performance warranty) over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge.Note:- (i) The old surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of paint. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted. (ii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by department for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture.(iii). After carrying out preparation of surface the same shall be got approved from Engr-in-Charge before applcation of distemper for each building.(iv). The colour / shade will be all as approved by GE/Engr-in-Charge (v) The cost of Scaffolding wherever required are deemed to be included in the rates quoted by the contractor |
| 23 | Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store yard and rubbish of the primeses complete all as specifed and directed by Engr -in-Charge |
| 24 | Demolition of cement concrete in ground floor and paving not exceeding 15cm thick ( below or above ground level ) complete including removal of debries out side MD land complete all as specifed and directed by Engr -in-Charge |
| 25 | M&L for 25mm thick PCC (1:2:4) type B-0 using 12.50mm graded crushed stone aggregate as in sub base, levelling course, etc complete all as specifed and directed by Engr -in-Charge |
| 26 | M&L for non-skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1: 6 complete all as specifed and directed by Engr -in-Charge |
| 27 | M&L for glazed ceramic coloured tiles of size 450x350x7 mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over and including10 mm thick backing coat on fair faces of brick work in CM (1:4) complete all as specifed and directed by Engr -in-Charge |
| 28 | M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40mm graded stoen aggregate) as in foundation, sub base of floor, etc complete all as specifed and directed by Engr -in-Charge |
| 29 | M&L for 75mm thick cement concrete 1:3:6 type C2, with using 40mm graded stone aggregate as in floor/ plinth protection finish the surface even and smooth without using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary form work etc complete all as specifed and directed by Engr -in-Charge |
| 30 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specifed and directed by Engr -in-Charge |
| 31 | M&L for 20 mm thick granite (black) thick machine cut, 20mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing of approved quality of any size set and jointed in grey cement slurry laid over and including 10 mm thick backing in CM (1:4) including granite polish to be done by mechanical grinder and moulding edges complete all as specifed and directed by Engr -in-Charge |
| 32 | S&F in repairs 500 ltrs capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I and including PTMT float valve 20mm dia and making connection for inlet and outlet complete all as specified and directed |
| 33 | S&F in repairs 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I and including PTMT float valve 25mm dia and making connection for inlet and outlet complete all as specified and directed |
| 34 | Cleaning and removing all dirts and scales from service water tanks and from mouth of circulating pipes etc capacity of tank exceeding 250 ltr but not exceeding 500 ltr complete all as specifed and directed by Engr -in-Charge |
| 35 | Cleaning and removing all dirts and scales from service water tanks and from mouth of circulating pipes etc capacity of tank exceeding 500 ltr but not exceeding 1000 ltr complete all as specifed and directed by Engr -in-Charge |
| 36 | S&F in repairs 15mm bore ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed. ( Min Weight 15mm-142 gms) |
| 37 | S&F in repairs 20mm bore ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed (Min Weight 20mm-210 gms) complete all as specifed and directed by Engr -in-Charge |
| 38 | Taking up or down 15 mm dia old serviceable / unserviceable steel tubing any grade and connections complete all as specifed and directed by Engr -in-Charge |
| 39 | Taking up or down 20 mm dia old serviceable / unserviceable steel tubing any grade and connections complete all as specifed and directed by Engr -in-Charge |
| 40 | S&F steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,for 15mm bore pipes including cutting through walls, floors, etc and their making good with existing surface complete in all respect as specified |
| 41 | S&F steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,for 20 mm bore pipes including cutting through walls, floors, etc and their making good with existing surface complete in all respect as specified |
| 42 | S&F in repairs 15 mm CP long neck bib taps screwed down high pressure chromium plated screwed for iron pipe and fixed complete all as specifed and directed by Engr -in-Charge |
| 43 | S&F in repairs 15 mm bib taps cast copper alloy, screwed down high pressure chromium plated screwed for iron pipe and fixed complete all as specifed and directed by Engr -in-Charge |
| 44 | S&F in repairs 15 mm bib cock two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe complete all as specifed and directed by Engr -in-Charge |
| 45 | S&F in repairs stop valves fancy type chromium plated with long shanks fixed with 15 mm dia bore pipes complete all as specifed and directed by Engr -in-Charge |
| 46 | S&F in repairs pillar taps (swan neck type) cast copper alloy with capstan head, screwed down ,high pressure with long screwed shanks and fly nuts fixed in 15 mm bore pipes complete all as specified and directed. |
| 47 | S&F in repairs 15 mm stop cock cast copper alloy, screwed down high pressure chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 48 | S&F in repairs concealed stop valves fancy type chromium plated with long shanks and cup fixed with 15 mm dia bore pipes complete all as specifed and directed by Engr -in-Charge |
| 49 | S&F in repairs CP wall mixer with provision for over head shower with 115 mm long bend pipe for mixing hot & cold water screwed down for iron pipe 15mm bore complete all as specifed and directed by Engr -in-Charge |
| 50 | S&F in repairs 15 mm wash basin mixutre, centre hole, mixing hot & cold water, fancy type, cast copper alloy, chromimum plated with capstan head, chromium plated, screwed down high pressure, screwed for iron pipe etc complete all as specifed and directed by Engr -in-Charge |
| 51 | S&F in repairs Stainless steel sink with drainage board , 1.00mm thick for kitchen, with plug, washers and wastes/coupling,waste pipe etc including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm with bowl size 410mmx 330mmx 160mm fixed complete all as specifed and directed by Engr -in-Charge |
| 52 | S&F in repairs stainless steel plate rack for kitchen 1 mm thick of best quality with suitable hanging arrangement and fixed to wall complete all as specified and as directed by Engineer-in-Charge.Note:- Size of plate rack should not be less than 900x1200 mm and weight of rack shall not be less than 8.5 Kg each complete all as specifed and directed by Engr -in-Charge |
| 53 | S&F in repairs vitreous china Wash down water closet (Padestal pattern) white with P or S trap including plastic water closet seat & cover mild steel chromium plated or aluminised hinging device and jet, fushing cistern low or high level, 32mm dia polyethylene fush pipe etc compete all as specified. |
| 54 | S&F in repairs vitreous china squatting pan `Orissa ' pattern of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipes) including connection to trap and to flush pipe etc and lime concrete bedding including 'P' or 'S' trap complete all as specifed and directed by Engr -in-Charge |
| 55 | S&F in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action push type with inlet ball valve and float including flush pipe long 32mm dia, ball valve, handle, bracket etc complete all as specified and directed. |
| 56 | S&F in repairs Health faucet mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 57 | S&F in repairs flexible type PVC waste pipe 32 mm bore of pipe for WHB/SINK/urinal, etc complete all as specifed and directed by Engr -in-Charge |
| 58 | S&F in repairs PVC (SWR) floor trap plain or multi with stainless steel grating incl joining to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specifed and directed by Engr -in-Charge |
| 59 | S&F in repairs brass CP tubular towel rail 20 mm dia 60cm long between flange with brackets etc as complete all as specifed and directed by Engr -in-Charge |
| 60 | S&F in repairs CP towel ring, dia not less than 200mm complete all as specifed and directed by Engr -in-Charge |
| 61 | S&F in repairs 125 mm size chromium plated shower rose with siwel joint suitable for 15 mm bore GI pipes complete all as specifed and directed by Engr -in-Charge |
| 62 | S&F in repairs Plastic water closet seat cover in white colour, closed pattern with flat bottom, and mild steel chromium plated for aluminised hinging device complete all as specifed and directed by Engr -in-Charge |
| 63 | S&F in repairs wash basins, vitreous China white flat back size 580x450mm size, including cutting for and pinning in ends with & incl MS adjustable brackets or erecting stand complete all as specifed and directed by Engr -in-Charge |
| 64 | S&F in repairs pedestal wash basins, vitreous China white flat back size 580x450mm size, including cutting for and pinning in ends with & incl MS adjustable brackets or erecting stand complete all as specifed and directed by Engr -in-Charge |
| 65 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specifed and directed by Engr -in-Charge |
| 66 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all asspecified and as directed |
| 67 | S&F in repairs corner glass shelf (with bracket) complete all as specifed and directed by Engr -in-Charge |
| 68 | S&F in repairs CP grating 100mm dia complete all as specifed and directed by Engr -in-Charge |
| 69 | S&F in repairs 600x450mm beveled edge mirror of selected quality glass mounted on PVC framed and fixed to wooden plug with CP screw and CP washer complete all as specifed and directed by Engr -in-Charge |
| 70 | S&F in repairs 300x450mm PVC cabinet mirror of selected quality glass mounted on PVC framed and fixed to wooden plug with CP screw and CP washer complete all as specifed and directed by Engr -in-Charge |
| 71 | S&F in repairs 25 mm dia powder coated drappery curtain rod with brass /nickel chrome polish bracket complete all as specified and directed . |
| 72 | S&F CP waste coupling of size 32 mm dia WHB with long screwed shanks and fly nut fixed in repair complete all as specifed and directed by Engr -in-Charge |
| 73 | Cutting chases in brick wall built in cement mortar for concealed water tubing and making good with cement mortar 1:4 ,cutting depth not exc 10 cm complete all as specifed and directed by Engr -in-Charge |
| 74 | Resecuring or easing and adjusting without taking down shutter of any discription n exc 1.0 sqm each complete all as specifed and directed by Engr -in-Charge |
| 75 | Resecuring or easing and adjusting without taking down shutter of any discription exc 1.0 sqm but nexc 2.0 sqm each complete all as specifed and directed by Engr -in-Charge |
| 76 | Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area n. exc 1.5 sqm each complete all as specifed and directed by Engr -in-Charge |
| 77 | Taking down shutters of any description exc 1 sqm but n.exe 2 sqm each complete all as specifed and directed by Engr -in-Charge |
| 78 | S&F factory made solid PVC door frame of size 50mm x 47mm made out of plain 5mm plain colour PVC sheet reinforced with ms square tube, with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specifed and directed by Engr -in-Charge |
| 79 | S&F factory made PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded both side prelam PVC sheet instead of plain colour PVC 'C' channelled having a PVC sheet strip of 20 mm wide stuck inside with solvent cement for siles and palin colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail : panelling of prelaminated PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, in the frame a site as per specification and drawing etc complete all as specified and as directed |
| 80 | S&F in repairs galvanised mild steel wire cloth of 0.56mm dia wire and average width of aperture 1.18mm & fixed with tacks or galvanised I wire staples,etc complete all as specifed and directed by Engr -in-Charge |
| 81 | S&F 100 mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specifed and directed by Engr -in-Charge |
| 82 | S&F in repairs 18mm thick factory made 100% solid rigid PVC (Poly Vinyl Chloride) foam sheet Prelam colour having density of 600kg/cbm manufactured by an Iso 9001-2015 certified company.Termite proof,water proof and flame retardant PVC sheet,manufactured by single layer extrusion process for one side prelaminated solid PVC foam sheet. PVC film laminate should be pasted on PVC sheet with suitable adhesive and approved shade complete all as specifed and directed by Engr -in-Charge |
| 83 | S&F in repairs stainless steel self closing hinge of 75 mm size for PVC door shutter complete all as specifed and directed by Engr -in-Charge |
| 84 | S&F in repairs 100 mm size MS mat / glossy finish handle complete all as specifed and directed by Engr -in-Charge |
| 85 | S&F in repairs 50 X 15 mm size magnet door catcher for closing for PVC door shutter complete all as specifed and directed by Engr -in-Charge |
| 86 | S&F in repairs steel drawer cabinet channel n.exe 600mm long for moving the drawer etc close ball bearing CP finishied corrision resistance godrej pattern complete as specified and directed. |
| 87 | S&F in repairs modular type stainless steel basket size 0.50 m x 0.53 m x 0.10 m (dia of wire not less than 3.0mm) of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws incl all fixing arranement complete all as specifed and directed by Engr -in-Charge |
| 88 | S&F in repairs modular type stainless steel basket size 0.50 m x 0.53 m x 0.15 m (dia of wire not less than 3.0mm) of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws incl all fixing arranement complete all as specifed and directed by Engr -in-Charge |
| 89 | S&F in repairs modular type stainless steel basket size 0.50 m x 0.53 m x 0.21 m (dia of wire not less than 3.0mm) of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws incl all fixing arranement complete all as specifed and directed by Engr -in-Charge |
| 90 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty of fixed with beads including and S&F of sheet glass plain ordinary quality 3.00 mm thick and glazing with oil putty/Bead not exc. 0.50 sqm in each pane complete all as specifed and directed by Engr -in-Charge |
| 91 | S&F in repairs stainless steel wire cloth of 0.36mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples,etc complete all as specifed and directed by Engr -in-Charge |
| 92 | S&F in repairs stainless steel hinges for modular kitchen shutters complete all as specifed and directed by Engr -in-Charge |
| 93 | M&L for preparing old wall/ceilling/roof surface which includes clean and free from oil or loose materials and applying two coats of ''Asian Smart Care Damp Block 2K'' (or make as per Particular Specification (list of Make) as approved by GE)) two components acrylic polymer-modified cementitious high performance coating all as per manufacturers instruction complete all as specifed and directed by Engr -in-Charge |
| 94 | M&L for complete removal existing surface finishes and applyying putty 2 mm thickness and applying texture paint design as approved by GE and applying two coats of plastic emulsion (royal shyne/ make as per Particular Specification (list of Make) as approved by GE)) over a coat of primer complete all as specifed and directed by Engr -in-Charge |
| 95 | M&L fo washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1silver cement: 1/2 coarse sand : 2 marble stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippingscomplete all as specifed and directed by Engr -in-ChargeNote: Paymentforproviding grooves shall be made separately) |
| 96 | M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge |
| 97 | M&L for preparing old plastered surface of wall and applying two coat of cement base paint etc complete all as specified and as directed |
| 98 | M&L for two coats of white wash on ceiling on old surfaces including preparation of surfaces complete all as specified and as directed |
| 99 | M&L for preparation of new wooden surface of any description, not other wise described over 10 cm widht or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed |
| 100 | M&L for preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed |
| 101 | M&L for rendering 5 mm thick in CM (1:3) on RCC Chajja / Facia over 20mm thick in CM 1:4 as dubbing coat etc complete all as specified and as directed |
| 102 | M&L for two coat of painting with Damp guard (/ make as per Particular Specification (list of Make) as approved by GE)) water proofing liquid including preparation of new plastered surfaces complete all as specified and as directed by Engineer-in-Charge. |
| 103 | Disconnecting existing tanks of capacity exc 250 ltr but not exc 500 ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after cleaningrepairing, etc. complete all as specified and as directed |
| 104 | Disconnecting existing tanks of capacity exc 500 ltr but not exc 1000 ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after cleaningrepairing, etc. complete all as specified and as directed |
| 105 | Cleaning of roof slab /chajja with sweeping with brooms removing all depositions /mud/vegetations washing with water etc andjoin filling with cement & removing the spoil to a distn exc 50 m complete all as specified and directed Please Enable Macros to View BoQ information |
| 106 | Cleaning of roof slab /chajja with sweeping with brooms removing all depositions /mud/vegetations washing with water etc andjoin filling with cement & removing the spoil to a distn exc 50 m complete all as specified and directed Please Enable Macros to View BoQ information |
