|
| 1 | Deep Drilled Tube Well |
| 2 | A. Drillino Portion |
| 3 | HYDT: of drilling 200 mm x165mm x125 mm meter deep bore well in all kinds of soil and rock in rural area for installation of pump set with hydraulic DTH rig machine , all complete including supplying all materials , tools drilling rig, air compressor and equipments, as well as fuel lubricants and cost of transportation rig machine and other vechiles up to the site |
| 4 | (a) 0.00 M to 50.00 M below GI |
| 5 | (b) 51.00 M to 200.00.00 M |
| 6 | Providing all equipments and labour for lowering 125mm dia blue UPVC Casing pipe as casing for protecting the side from falling during the process of drilling all complete job including carriage of material to work site. |
| 7 | Supplying labour cement and calcium chloride or bentonite solution and equipments for Grouting to Casing Pipe all complete job including carriage of material to work site as per specification & direction of E/I |
| 8 | Supplying all tools, equipments and labour and doing washing, flushing and development of drilled tube well to give clean and clear water al complete as per direction E/I. |
| 9 | Supplying all materials labours and equipment including 125 mm dia GI/CI cap 125 mm dia T/W properly all complete and taking it out as per specification & direction of E/I. (the cap will be property of department) |
| 10 | B. Civil Portion |
| 11 | Supplying all tools, equipment, labours and lowering 32 mm dia G.I. (Medium) pipe in DT in 3 mtr. Length all complete job as per direction of E/I. Including carriage of materials. |
| 12 | Supplying all tools, Labour for fitting and fixing deep well cylinder with necessary connecting rod alt complete job as per specifÏCation & direction of E/I. |
| 13 | Supplying all materials, labours for fitting and fixing of Índia Mark Il Hand Pump with all accessories all job complete as per direction of E/l. Including carriage of materials. |
| 14 | Supplying all materials, labours and equipment for constructing PCC (1:2:4) circular platform around each drilled tube well including 12mm thick cement plaster (1:4) with neat cement punning over exposed surface as per UNICEF design etc. all complete. Including carriage of materials. |
| 15 | Supplying all materials labour and equipment for constructing PCC (1:2:4) drain as per UNICEF Design etc. all complete .Including carriage of materials. |
| 16 | Add Extra Item for Supplying tools, labours and materials for painting, numbering and year for construction of T/Well and taking of colour photograph with two or three nearest persons including platform, drain, soak pit and also longitude & latitude, details of T/W such as total depth, casing depth, static water level, drawdown, discharge, strata chart, beneficiary population etc in separate sheet/format all complete as per direction of E/I. |
| 17 | C. COST OF MATERIALS |
| 18 | cost of standard I.S.I. mark Deep Well Hand Pump for India mark-II, I.S.I. 15500 (Part 2) / 2004 with latest revision including 12mm x 3 meter long 8 no. Connecting Rods made of bright bar electro-galvanized fitted with coupler & normal stand assembly recommended for use with cylinder assembly suitable for bore well casing pipe. |
| 19 | Cost of 32 mm dia GI pipe (Medium) 3 Mtrs long screwed at both ends with seamless socket as per IS:1239(Part 1990). |
| 20 | Cost of 125 mm dia blue UPVC Casing Pipe as per I.S.12818/2016 CML no.- 5543459 |
| 21 | Solar Photovoltaic (SPV) Solar Submersible D.C. Water Motor Pump |
| 22 | Designing, Supplying, Installation, Testing & Commissioning with all tools & Parts of following Solar Photovoltaic (SPV) Solar Submersible D.C. Water Motor Pump Suitable for minimum 125mm x 115mm bore wel as per MNRE Guideline with following specifications & accessories. |
| 23 | SPV arrays contains specified No of same capacity type & specification modules connected to series or paralle to obtained the required voltage & current the power output of individual PV modules should be minimum 200 watt peak. |
| 24 | i) The SPV modules should be asper IEC-61215 and IEC 61730 part1.0) |
| 25 | ii) All external parts of motor pump used in submersible pump which are in contact of water is stainless steel grade 303 or higher as required. |
| 26 | iii) The PV modules should be mounted on metallic structure of adequate strength and appropriate design which can withstand load of modules & High wind pressure up to 200Km/h. |
| 27 | iv) The module mounting structure should be hot dip galvanized according to IS 4759. |
| 28 | v) To enhance the performance of SPV water pumping system & arrangement for seasonal tilt angle Adjustment should be provided |
| 29 | vi) Necessary arrangement should be provided in controller automatic start-run-stop through out the day with water level etection system. (As per MNRE Specification) |
| 30 | vii) Necessary protection such as lightening arrestor etc. should be provided to protect the controller & SPV |
| 31 | viii) The suction/delivery pipe shall be UPVC / H.D.P.E. pipes of appropriate size 60m or more as required minimum pressure rating of 8kg/Sq cm- PE 100 grade for pump up to 3HP & 10 Kg/Sq cm- PE 100 grade for 5 HP. |
| 32 | ix) All cable used shall be as per IS 694. Suitable size of cable shall be used in sufficient length for inter connection between the SPV array to SPV controller and SPV controller to solar power pump. Provision of cable shall be as per IS 14536. |
| 33 | x) The motor pump set should have a 5 years warranty. |
| 34 | xi) Control panel suitable for motor pump with arrangement of dry run & over flow protection sensor, float switch & rain prevention box. (As per MNRE |
| 35 | xii) The SPV controller must have IP-65 protection or must be housed in cabinet having at least IP-65 protection. |
| 36 | xiii) The system should be as per MNRE guide line &Eco-friendly with suitable arrangement to operate new pump manually. |
| 37 | xiv) With third party inspection before dispatch. |
| 38 | xv) Fitting,structure.fixing & mounting on water tank stee |
| 39 | xvi) Provision for web based remote monitoring of thepumps to be installed must be made through the inbuilt controllers It should be possible to ascertain the daily water output, the power generated by PV Array, the Up and down time of the pump during the year, number of days the pump was unused or under breakdown repairs. |
| 40 | The following details should be marked indelibly on themotor pump set |
| 41 | a) Name of the Manufacturer or Distinctive Logo. |
| 42 | b) Model Number. |
| 43 | c) Serial Number. |
| 44 | Solar submersible motor pump (SPV DC Type) |
| 45 | i) 1 HP (DC Pump) ith 900 WP minimum watt P.V.Panel as MNRE pump head Max Shut-off head up to 120 mtrs. For higher or lower head or in between various modules output could be decided on prorates basis. |
| 46 | Provision of solar night lamp. |
| 47 | Construction RCC Foundation for Steel structure staging |
| 48 | Earth work in excavation in foundation trenches in ordinary soil and disposal of excavated earth as obtained to a distance up to 50.0m, including all lifts, levelling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/l (vide classification of soil item -B) |
| 49 | Foundation for Steel structure staging |
| 50 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour ,royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume) |
| 51 | Foundation for Steel structure staging |
| 52 | Providing designation 75 A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l |
| 53 | Providing PCC M-150 in nominal mix of (1:2:4) in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M.2.Sto 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing and royalty al complete as per building specification and direction of E/l |
| 54 | Foundation for Steel structure staging |
| 55 | Providing RCC M-200 in nominal mix of (1:1.5:3) in columns with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M.2.S to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing and royalty al complete as per building specification and direction of E/l. |
| 56 | (a)Foundation for Steel structure staging |
| 57 | Vertical Pedestal |
| 58 | Tie Beam |
| 59 | Providing for steel reinforcement as per approved design and drawing excluding carriage of T.S.bar to work site cutting, bending with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/I. |
| 60 | Carriage of materials |
| 61 | Cement |
| 62 | Stone Chips |
| 63 | Bricks |
| 64 | Steel |
| 65 | Construction of galvanized tubular Steel structure staging |
| 66 | For Structure :--- |
| 67 | Providing structural steel galvanised tubular hollow section work in trusses, other similar trussed purlins and members with all bracing ,gusset plates etc as per detailed design and drawing or as directed by Engineer- in-charge, including cutting fabricating, hoisting erecting and fixing in position making riveted/bolted /weIded connections and one coat of anticorrosive paint and over it two coat of all oil painting & For Structure(PLUS) Providing and applying materials &labour for hot dip galvanizing of above structure including transportation for galvanizing minimum thickness 80microns (Net wt.of components to be Galv) preferably TATA structural section etc.complete. |
| 68 | Information board for IEC |
| 69 | Providing structural steel work in trusses other similar trussed purlins and members with bracing gusset plates etc.as per detailed design and drawing or as directed by Engineer- in-charge including cutting fabricating hoisting erecting and fixing in position making reverted bolted welded connections one coat of anticorrosive paint and over it two coats of oil painting etc. complete (MJP 2021-2022 Sec F Item 6) |
| 70 | Materials and labour for vinyl painting of matter given by department in different color (As per Market Rate) |
| 71 | Installation of 2000 liters Capacity Water Storage Tank |
| 72 | Providing and fixing HDPE container Syntex or alike one piecemolded water tank made out of low density polythyler andbuilt corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity 2000.00 litres Capacity Water storage Tank(DWSD item No-01 M) |
| 73 | Transportation Charge |
| 74 | Lifting of 2000 Litrs Capacity Tank up to 4.Sm height with lifting tools with rope and labour. |
| 75 | Making hole in Tank |
| 76 | Making long screw in G.I. pipe including supplying and fitting jam nuts and extra socket etc. |
| 77 | Platform & Stand Post for VIDYALAY Connection |
| 78 | Earth work in excavation in foundation trenches in hard soi vide classification item-B and disposal of excavated earth as obtained to a distance up to 50 m including all lifts,leveIling,ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, building specifications and direction of E/I. |
| 79 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labours, royalty and taxes all complete as per building specification and direction of E/I.(mode of measurement compacted volume) |
| 80 | Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l. |
| 81 | Providing P C C M-1S0 in nomina mix of (1:2:4)in foundation with approved quality of stone chips 2Omm to 6mm size graded and clean coarse sand of F.M2.5 to 3 including screening shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I. (Part-A 7.2 (A) |
| 82 | Providing 12 mm thick cement plaster (1:3) with clean coarse sand of F.M 1.5 with 1.5 mm thick cement punning over it including screening, curing, with all leads and lifts of water, taxes and royalty all complete as per building specification an direction of E/l. |
| 83 | Carriage of materials- |
| 84 | Cement |
| 85 | Stone Chips |
| 86 | Bricks |
| 87 | Bore well Brick Masonry Protection Chamber |
| 88 | Earth work in excavation in foundation trenches in ordinary soi (vide classification of soil item-B) and disposal of excavated earth as obtained to a distance up to 50m including all lifts,levelling,ramming thefoundation trenches, removing roots of trees shrubs all complete as perapproved design, building specification and direction of E/l. |
| 89 | Providing designation 75 A Brick work in C.M (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M.2 to2.5 including providing 10mm thick mortar joints, cost of screening,scaffolding,raking out joints to 15mm depth,curing,taxes and royalty all complete as per building specification and direction of E/l. |
| 90 | Providing pre cast R.C.C.M-150 in nominal mix of (1:2:4) slab of desire size with approved quality of stone chips (20mm to 6mm size) graded and clean coarse of F.M 2.5 to 3 including curing (but excluding the cost of reinforcement),taxes and royalty all complete as per building specification and direction of E/I. |
| 91 | Providing T.M.T steel reinforcement of different dia rods as per approved design and drawing including carriage of M.S bars to work site, cutting bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/l. |
| 92 | Providing 12 mm cement plaster (1:6) with clean coarse sand of F.M 1.5 including cost of screening, curing with all leads and lifts of water,scaffoIding,taxes and royalty all complete as per building specification and direction of E/l. |
| 93 | Carriage of Materials |
| 94 | Cement |
| 95 | Stone Chips |
| 96 | Bricks |
| 97 | Steel |
| 98 | Add 18 % GST |
| 99 | Adding Labour Cess @ 1% of Estimated Cost Please Enable Macros to View BoQ information |
