|
| 1 | Labour charges for installation of submersible motor pump set including lowering/ delowering of pipes, cables, accessories etc. in tube-well/ open well complete including T&P, transportation of tripod, chain pulley block & any other material required for this purpose complete in all respect. Delowering and Lowering 70.1.3 |
| 2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 40 mm nominal outer dia .Pipes. 34.9.4 3 |
| 3 | 32 mm nominal outer dia .Pipes |
| 4 | 25 mm nominal outer dia .Pipes |
| 5 | 20 mm nominal outer dia .Pipes |
| 6 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore. 34.17.2 |
| 7 | Providing and fixing gun metal non- return valve of approved quality (screwed end) 32 mm nominal bore Horizontal 34.19.2.1 |
| 8 | Providing and fixing brass bib cock of approved quality : 20 mm nominal bore 34.15.2 |
| 9 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 29.26.2 |
| 10 | Painting with enamel paint of approved brand and manufacture to give an even shade two or more coats on new work.32.50.1 |
| 11 | Earthwork in excavation in foundation trenches or drains including dressing of sides and ramming of bottom, lift up to 1.5 Mtr. Including taking out the excavated soil and depositing and refilling of jhiri with watering and ramming and disposal of surplus excavated soil as directed within a lead of 50 Mtr. All kind of soil4.10 |
| 12 | Providing and laying in position cement concrete including curing compaction etc. complete specified grade excluding cost of centering and shuttering: -All work up to plinth level: (a) 1:5:10(1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) 21.1.8 |
| 13 | Providing and laying cement concrete including curing and compaction etc. complete using stone agg. 20mm Nominal size in foundation & plinth excluding cost of shuttering using M-15 mix 1:2:4: |
| 14 | Half brick masonry in superstructure up to 4.50 Mtr above plinth level using bricks of designation 75 in cement mortar 1:4. 24.12.2 |
| 15 | Cement plastering including T&P, scaffolding, material and complete labour, including cost of water, curing, racking of joints etc. with 15 mm cement plaster on the rough side of single or half brick wall of mix : including Providing /mixing of synthetic fibers compulsorily complying with IS 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of Cement i.e. 125 gms per 50 kg Cement up to 900 gms per cum of Concrete/ mortar 1:6 (1 cement : 6 fine/ coarse sand) 32.2.2 |
| 16 | Finishing with neat cement punning 32.9 |
| 17 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank(a)1000ltr Capacity 34.47 |
| 18 | Supplying and Installation of 32mmdia G.I. pipe medium class Isi marked in 3 Mte length including all accessorios and fittings required for insatallation of hand pump PHED BSR ITEM |
| 19 | Supply of India mark II hand pump set complete ISI marked withcylinder and ten connectiing rods etc PHED BSR ITEM |
| 20 | Construction of 185 cm dia platform as per approved design and drawing of UNICEF PHED BSR ITEM |
| 21 | Installation of India mark II hand pump set, complete on existing platform PHED BSR ITEM |
| 22 | Lettering with black Japan paint of approved brand and manufacture , 32.60 |
| 23 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore 34.13.1 Please Enable Macros to View BoQ information |
