|
| 1 | Exacavation in Foundation As Per DSR 2.6 |
| 2 | Sand filling in foundation and plinth DSR 2.27 |
| 3 | C.C.Work in based conc. Of CC road with (1:5:10) cement,f-sand & 40 mm gauge brick Ballast. Including s/o all materials Labour, T&P etc.Required for proper completion of work (S.I.NO.274) |
| 4 | Brick work with common burnt clay F.P.S.(non modular) bricks of class designation 7.5 in foundation and plinth in 1:6 (1 cement:6 corse sand) dsr 612 |
| 5 | Mild steel or iron in plane work such as reinforced concret si dsr 5.22A.4 |
| 6 | Brick work with common burnt clay F.P.S.(non modular) bricks of class designation 7.5 in super structure above plinth level up to floor V level in all shapes and size in 1:6 (1 cement: 6 coarse sand) dsr6.4.2 |
| 7 | Exacavation supply stacking and filling of the local earth (including royality) by machanical transport upto a lead of 5 km dsr 2025(a) |
| 8 | R.C.C. Work in wall (any thikness),including attached pilasters butteresses, plinth and string courses, fillets, columns, pillars, piers etc 1:1.5:3(1cement:1.5 coarse sand and 20mm nominal size derived from natural sources) dsr 5.2.2 |
| 9 | 12 mm thick Plaster 1:6 Cement & Fine Sand dsr13.1.2 |
| 10 | Providing and applying plaster of paris putty of 2 mm thikness over plastered surface to prepare the surface even and smooth complete DSR 13.26 |
| 11 | Finishing of wall textured exterior paint of required shade dsr 13.45.1 |
| 12 | P/L CC 1:2:4 (Cement,c-sand and graded stone ballast 20mm nominal size) including supply of all material (279 b) |
| 13 | Providing and fixing 1mm thick m.s.sheet garrage door with frame 40x40x6 mm angle iron with fitting all complete si dsr 10.5.1 |
| 14 | Centering shuttering including strutting, propping etc and removal from for dsr 5.9.1 |
| 15 | Winng for twin control light point with 1.5 aq.mm FRLS PVC insulated copper conductor single cone cable in surface recessed steel conduit 2 way plano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable etc es required. Wiring for light point fan point exhaust fan point call bell point with 1.5 sq mm FRLS PVC Insulated copper conductor single core cable in surface recessed steel condult with modular switch, modular plate suitable Gl box and earthing the point with 15 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. DGR NO ELE 2022 1.2 |
| 16 | P/L of 80 mm thick Rubber molded reflective zig-zag interlocking tiles including all complete. |
| 17 | Red base |
| 18 | Gray base |
| 19 | LED light with pole |
| 20 | Steel Banch (as per market rate) |
| 21 | Providing & laying selection no. 1 doob grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same maintenance for 30 days or more till the grass establish properly, as per direction of officer in charge bor der 2.34 |
| 22 | S/F of sign board with B.G. Stone including all complete. Please Enable Macros to View BoQ information |
