|
| 1 | Part-A (Material Provided by Contractor) |
| 2 | Clamp for 33 KV \\"V\\" type Cross arm with bolts and nuts |
| 3 | F-bracket for 33 KV |
| 4 | Polymeric 33KV Pin Insulator |
| 5 | Number Plate with clamp and Nut & Bolt |
| 6 | Danger Plate with clamp and Nut & Bolt |
| 7 | G I Barbed Wire |
| 8 | Nut Bolt and washer all sizes |
| 9 | Earthing of Pole by M S Earthing Rod 20 x 2500 mm and 6 SWG earthing wire etc |
| 10 | Stay complete ( GI Stay ROD 20X1800mm , stay wire 7/8 SWG 10 kg, stay clamp, nut bolt and washer) |
| 11 | Disc Fitting for drop B&S type |
| 12 | Disc Insulator B&S Polymeric Type |
| 13 | PG Clamp Dog to Dog |
| 14 | M S Channel 100x50 mm 2400 mm Long |
| 15 | Holding Clamp for Top,MS droper channel,GI Pipe & Cable |
| 16 | G I Pipe 6\\" Dia |
| 17 | Lug for ACSR Dog Conductor |
| 18 | MS Guarding Angle |
| 19 | Guarding Angle Clamp |
| 20 | GI Wire 6 SWG |
| 21 | Gi Wire 8 SWG |
| 22 | 33 KV ‘XLPE’ C/J Kit 3x300mm² Outdoor |
| 23 | Supply of HDPE 160 mm dia Pipe with all related fittings as per site Requirement for laying of 33KV, 3x300Sq.mm XLPE cable for Railway crossing/Road Crossing/Chauraha etc. |
| 24 | PART – B- WORKShifting,loading and carriage of following materials on private truck at store centre Padrauna & Un-loading of the same with proper stacking at work site. |
| 25 | 11M, PCC Pole |
| 26 | ACSR Dog Conductor. |
| 27 | 33KV \\"V\\" type Cross arm 100 x 50 x 6 mm, M.S. Chaneel |
| 28 | 33 KV ‘XLPE’ Cable 3x300mm² |
| 29 | Top Channel 125x65 mm, 3200 mm long |
| 30 | Laying of HDPE 160 mm dia Pipe with all related fittings for laying of 33KV 3x300Sqmm, XLPE Cable by digging trench ,as per site requirement HDD method can be used |
| 31 | Jointing charge of 33 KV ‘XLPE’ C/J Kit 3x300 mm² Outdoor /Straight Through |
| 32 | Labour charges for inserting of G.I. Pipe, Rising of 33 KV cable in air,looping of 33KV XLPE Cable and jumpering complete work. |
| 33 | Special GI Pipe earthing upto water level for 33 KV Jointing Kit with materials. |
| 34 | Fabrication (with providing of required material) of 13 mtr. Long P.C.C./S.T. pole by welding 3 mtr. long 5” dia M.S. pipe and flat iron 50 x 6 mm 12” long. |
| 35 | Making cable stand(Including Erection Grouting) of 01 No. top Channel in transmission switchyard with all required materials. |
| 36 | Erection of Single pole structure on 11 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (‘V' type cross arm 100 x 50 x 6 mm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, barbed wire earthing, etc. complete). |
| 37 | Grouting of stay rods (20 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening &nozzling of stay wire with stay rod with the poles of required tension. |
| 38 | Guarding between two poles like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, cutting, fabrication and fixing of guarding channel 75 x 40 x 3010 mm with clamps nut & bolts etc. |
| 39 | Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel. Please Enable Macros to View BoQ information |
