Tender For Under The Electricity Secondary Works Division, Gorakhpur Under The Construction Of New 33/11 Kv Sub-Station Mahason (2X5 Mva), Construction Of New 33 Kv Mahason Line From 132/33 Kv Substation Raja Pakar For Proposed Ss Mahason And The Con, Kushinagar-Uttar Pradesh

TDR : 55727704

Tender Notice
BOQ

11 Days Left

Kushinagar , Uttar Pradesh

Tender Brief : Tender For Under The Electricity Secondary Works Division, Gorakhpur Under The Construction Of New 33/11 Kv Sub-Station Mahason (2X5 Mva), Construction Of New 33 Kv Mahason Line From 132/33 Kv Substation Raja Pakar For Proposed Ss Mahason And The Con

Document Fees
₹ 5900 /-

EMD
₹ 185000.0 /-

Tender Value
Refer document

Submission Date
10-06-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Part A (Materials Provided by contractor) Sub-Station
2	33 KV Ploymer Pin insulators
3	PG Clamp Dog to Dog Conductor
4	PG Clamp Panther to Dog Conductor
5	Cable Jointing Kit 3×300 mm outdoor 11 KV
6	Cable Jointing Kit 3×300 mm indoor 11 KV
7	Cable Jointing Kit 3×185 mm outdoor 11 KV
8	Cable Jointing Kit 3×185 mm indoor 11 KV
9	MS Dropper Channel
10	11 KV Top Channel
11	G I Pipe 6'‘ Dia
12	11 KV Disc Insulator B&S Polymeric Type
13	11 KV Disc Fitting
14	PG Clamp weasel to weasel
15	Number Plate with clamp and Nut & Bolt
16	Danger Board with clamp and Nut & Bolt
17	Barbered Wire
18	Nut Bolt and washer all sizes
19	Stay set complete for 11KV
20	Earthing of Pole by M S Earthing Rod 20 x 2500 mm and 6 SWG earthing wire etc
21	Holding Clamp for GI Pipe
22	Holding Clamp for cable
23	Holding Clamp for Top, Droper
24	Lug for ACSR Weasel/Dog Conductor
25	L.T.P.V.C. Cable 3½×70 mm2
26	Terminal Gantry
27	Bus Bar complete with structure and all required materials (ACSR Panther conductor, Insulator and PG clamps etc)
28	Cable Stand with MS Channel
29	L Type Structure for Neutral Stand
30	24 Volt Battery & Battery Charger/Inverter with cabinet
31	Armoured Cu. Control Cable 2×2.5 mm2
32	Armoured Cu. Control Cable 4×2.5 mm2
33	11 KV T.P. M.O. Switch with fixing clamps
34	11 KV Fuse set with fixing clamps.
35	T&P of Substation switchgears (Hand Gloves-05 Set, Safety Helmets-5 Set, Safety Belts-4 Set, Tool kit Box-1, Pliers-05 Nos, Meggar-1 No, Multimeter-1 No, earth chain, ladder, Discharge Rod-3 No.)
36	Rubber Mat
37	Fire Fighting equipments including 02 no 10 kg,02 Nos. 4.5 Kg. Co2 Fire Extinguisher portable type and 02 Nos. machenical Foam type Fire Extinguisher portable type
38	Fire Bucket with sand and stand
39	Substation Furniture (4–fiber Chairs,2-wooden chair,1- revolving chair, 2–Table with drawer, 2–Bench, 1–Chauki, 2–Stool)
40	Sundry items
41	Part -B – WORKShifting, Loading Carriage & Unloading of following materials from store centre Padrauna to work site.
42	ACSR Dog Conductor
43	11 KV XLPE Cable3×300 mm2
44	11 KV XLPE Cable3×185 mm2
45	ST Pole 11 M long
46	PCC Pole 8.5 M Long
47	33 KV line Isolator
48	Structure for line Isolator
49	33 KV Bus Isolator
50	Structure for Bus Isolator
51	33 KV post insulators
52	Structure for Post Insulator
53	33 KV C. T
54	C.T Structure
55	33 KV PT(Outdoor)
56	PT Structure
57	33 KV Fuse Set
58	Fuse Set Structure
59	33 KV Lightning Arrestors
60	LA Structure
61	33 KV VCB 800A, 750 MVA with Structure
62	33 KV Control Panel for Single T/F
63	33KV Control Pannel for single feeder
64	90 Lbs. Rail pieces for T/F Wt. 44.6 Kg/Mtr.
65	11 KV VCB (Incoming) 600/300/5A 350 MVA
66	11 KV VCB (Out going) 200/100/5A 350 MVA
67	11 KV Bus Coupler
68	63 KVA 11/0.4 KV Transformer
69	Erection, grouting & painting (Except VCB structure) of following fabricated structures as per RESSPO Drawing.
70	33 KV Bus bar Gantry
71	33 KV Terminal Gantry
72	33 KV Isolator structure
73	33 KV L.A. structure
74	33 KV Post insulator structure
75	33 KV fuse set structure
76	33KV C.T. structure
77	33KV P.T. structure
78	33 KV VCB Structure
79	Insttalation, mounting & fitting of equipment on erected structures as per RESSPO Drawing.
80	33 KV Line isolator complete
81	33 KV Bus isolator complete
82	33 KV L.A.
83	33 KV Post insulator complete
84	33 KV fuse set
85	33KV C.T.
86	33KV P.T.
87	33 KV VCB
88	Construction of power transformer plinth for 05 MVA transformer of size 3.5 x 3.5 x 0.5 mtr or as per site requirement. including cost of all material as per requirement. (As per UPPCL Drawing)
89	Transformer body earthing complete including cost of G.I. strip, G.I. pipe 1.5” dia 60’ long and other earthing materials. (delta type) (As per UPPCL Drawing)
90	Neutral earthing of 5 MVA transformer complete including cost of G.I. strip, G.I. pipe 1.5” dia 60’ long and other earthing materials. (delta type) (As per UPPCL Drawing)
91	Indoor Equipment earthing (11 kv pannels) including cost of G.I. strip, G.I. pipe 1.5” dia 60’ long and other earthing materials. (delta type) both delta earthing will be connected with 32mm round bar (As per UPPCL Drawing)
92	Separate earthing of Indoor Equipment (33 kv control pannel) including cost of G.I. strip, G.I. pipe 1.5” dia 60’ long and other earthing materials. (delta type)
93	Special earthing of LA including cost of G.I. strip, G.I. pipe 1.5” dia 40’ long and other earthing materials. (delta type)
94	Providing and Making of Outdor Earthing (Eartmat) as per UPPCL Norms.
95	Laying of 11 KV “XLPE” cable 3 x 185/300 mm2 including digging of pits of size 0.5 x 0.5 mtr. covering of cable with sand and 1st class bricks around and top of the cable or laying in cable trench and covering with brick and sand as per site requirement. (As per UPPCL Drawing)
96	Rising of cable on DP with GI Pipe 6\\" dia 3mtr long for cable safety.
97	Providing and erection of Special pipe earthing for cable & 63 KVA DT protection.
98	Stringing of Terminal gantry and Making all Jumpers with provided all required material. complete work.
99	Stringing of 33 KV Bus Bar and Making all Jumpers in Switchyard with provided all required material. complete work
100	Providing & grouting of Neutral stand with all required materials.
101	Providing & Grouting of cable stand and fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of jumpers.
102	Writing name on S/S Building 11 KV Switchgear panels & all equipments insatalled in control room & switchyard.
103	Jointing charges of 11 KV “XLPE” C/J kit 3 x185/300 mm2 indoor/outdoor.
104	Installation and connection of 63 KVA T/F with all accessories
105	Fitting & Fixing of TPMO and Fuse set on erected 11 KV D/P.
106	Making of control cable trench with cover and hanger by providing all required materials. as per site requirement.
107	Control Cable laying from switchyard to control room for 33 KV panel, CT, VCB, 5 MVA t/F in trench and making connection complete. ( As per Supervision Authority).
108	Size 2 x 2.5 mm2
109	Size 4 x 2.5 mm2
110	Providing and writing of Sub-Station Name & Arrow shine Board Complete.
111	Shifting of 11 KV switchgear to control room and placing in control room with grouting of bolts and mounting of switchgear panels properly.
112	Electrical connection of 11 KV switchgear panel and fitting of Bus Bar.
113	Construction of SSO's approached road 1.5 Mtr. wide in Switchyard by laying dry sand and interlocking bricks The work include proper plastering top & side of road and leveling & dressing of earth beneath the brick work on edge.
114	Laying of LT cable 3.5x70 sqmm
115	Outdoor switch yard & approch road colony lighting with Providing of 06 no. street light pole & 150-watt LED light and all required materials
116	Installation of 33 KV control panel for “VCB” with complete earthing and connection of battery and battery charger/inverter in control room and making all protection equipment connection.
117	Installation & Concreting of Stay set complete
118	Filling of sand in cable trench in the Switch Gear Room.
119	Installation of 24 V Battery & Battery Charge/ Inverter with cabinet
120	Erection, grouting, muffing and painting of 2 Nos. ST Poles 11m long for making DP Structure including fabrication & fixing of M.S. Channel, M.S. Angle, TPMO, Fuse Set, disc Insulators etc. The work includes supply and fixing of necessary clamps with nuts, bolts and washers. The work also includes grouting of Double pole support in C.C. 1:4:8 (cement, sand & brick ballast) in block of size (0.45m x 0.45 x 1/6 length of the pole) including earthing of Double pole with M.S. earthing rod complete in all respect.
121	Erection, grouting of 2 Nos. PCC Poles 8.5 m long for making DP Structure including fabrication & fixing of M.S. Channel, M.S. Angle, TPMO, Fuse Set, disc Insulators etc. The work includes supply and fixing of necessary clamps with nuts, bolts and washers. The work also includes grouting of Double pole support in C.C. 1:4:8 (cement, sand & brick ballast) in block of size (0.45m x 0.45 x 1/6 length of the pole) including earthing of Double pole with M.S. earthing rod complete in all respect.
122	Construction of Fire Wall between Transformers with all required material. (As per UPPCL Drawing)
123	Providing of Misc. Items i.e. all type register, Single Line Diagram, Shut Down/Breakdown Name Board, Writing name on Substation Building, name of feedar & switchgear
124	Testing & commissioning charges of Substation.
125	Part A (Materials Provided by contractor) 33 KV Line
126	Clamp for 33 KV \\"V\\" type Cross arm with bolts and nuts
127	F-bracket for 33 KV
128	Polymeric 33KV Pin Insulator
129	Danger Plate with clamp and Nut & Bolt
130	G I Barbed Wire
131	Nut Bolt and washer all sizes
132	Earthing of Pole by M S Earthing Rod 20 x 2500 mm and 6 SWG earthing wire etc
133	33 KV angle for side arm
134	Clamps for side arm angle
135	‘E’ Bracket for 33 KV
136	Stay complete (GI Stay ROD 20X1800mm, stay wire 7/8 SWG 10 kg, stay clamp, nut bolt and washer)
137	Holding Clamp for Top, MS droper channel
138	Disc Fitting for drop B&S type
139	Disc Insulator B&S Polymeric Type
140	PG Clamp Dog to Dog
141	MS Angle Iron 65x65x6 mm Bracing 4300 mm long
142	Holding clamp for Bracing Angle
143	M S Channel 100x50 mm 2400 mm Long
144	G I Pipe 6\\" Dia
145	Holding Clamp for GI Pipe
146	Holding Clamp for cable
147	Lug for ACSR Dog Conductor
148	Aluminium Paint
149	Red Oxide Paint
150	Stay Clamp
151	MS Guarding Angle
152	Guarding Angle Clamp
153	GI Wire 6 SWG
154	GI Wire 8 SWG
155	33 KV ‘XLPE’ C/J Kit 3x300mm² Outdoor
156	33 KV ‘XLPE’ C/J Kit 3x300mm² Straight Through
157	Part -B – WORKShifting, loading and carriage of following materials on private truck at store centre Padrauna & Un-loading of the same with proper stacking at work site.
158	PCC Ple 9 Mtr Long
159	PCC Pole 11 Mtr Long
160	11M, ST Pole - SP - 55 Galvanised
161	ACSR Dog Conductor.
162	33KV \\"V\\" type Cross arm 100 x 50 x 6 mm, M.S. Chaneel
163	Top Channel 125x65 mm, 3200 mm long
164	33 KV ‘XLPE’ Cable 3x300mm²
165	Laying of 33 KV 3x300Sq.mm, XLPE Cable including cost of Sand & Bricks, As per site requirement HDD (trenchless) method can be used.
166	Jointing charge of 33 KV ‘XLPE’ C/J Kit 3x300 mm² Outdoor /Straight Through
167	Labour charges for inserting of G.I. Pipe, rising of 33 KV cable in air, looping of 33KV XLPE Cable and jumpering complete work.
168	Special GI Pipe earthing upto water level for 33 KV Jointing Kit with materials.
169	Erection of Single pole structure on 9 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (‘V' type cross arm 100 x 50 x 6 mm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, barbed wire earthing, etc. complete).
170	Erection of Single pole structure on 9 Mtr PCC Pole For Housing Side arm ,including all works of evocation of pit, pole erection, making plinth for poles, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (33 KV angle for side arm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, barbed wire earthing, etc. complete).
171	Erection of Double pole structure on 9 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete).
172	Erection of Four pole structure on 9 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete).
173	Erection of Double pole structure on 9 mtr PCC Pole for One side O/H and One side Cable Rising including all works of evocation of pit, pole erection, making plinth for Poles, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete) .
174	Erection of Single pole structure on 11 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (‘V' type cross arm 100 x 50 x 6 mm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, barbed wire earthing, etc. complete).
175	Erection of Double pole structure on 11 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete).
176	Erection of Four pole structure on 11 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete).
177	Erection of Single pole structure on 11mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (clamps with bolt and nut, Aluminium paint, red oxide paint etc. complete). .
178	Erection of Double pole structure on 11 mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .
179	Erection of Four pole structure on 11 mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .
180	Erection of Double pole structure on11 mtr STP Pole for One side O/H and One side Cable Rising including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete) .
181	Erection of Single pole as stud pole structure on 9 mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (clamps with bolt and nut, Aluminium paint, red oxide paint etc. complete). .
182	Erection of Single pole as stud pole structure on 11 mtr STP Pole including all works of evocation of pit, pole erection, making plinth for poles, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (clamps with bolt and nut, Aluminium paint, red oxide paint etc. complete). .
183	Grouting of stay rods (20 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening &nozzling of stay wire with stay rod with the poles of required tension.
184	Fabrication of 13 mtr. Long S.T. /P.C.C. pole by welding 3 mtr. long 5” dia M.S. pipe and flat iron 50 x 6 mm 12” long by providing M.S. pipe.
185	Guarding between two poles like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, cutting, fabrication and fixing of guarding channel 75 x 40 x 3010 mm with clamps nut & bolts etc.
186	Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.
187	Making Cable route marker with all materials
188	Tree Cutting Compensation
189	Part A (Materials Provided by contractor) 11 KV 04 No. Feeder
190	Clamp for 11 KV \\"V\\" type Cross arm with bolts and nuts
191	F-bracket for 11 KV
192	Polymeric 11KV Pin Insulator
193	Danger Plate with clamp and Nut & Bolt
194	G I Barbed Wire
195	Nut Bolt and washer all sizes
196	Earthing of Pole by M S Earthing Rod 20 x 2500 mm and 6 SWG earthing wire etc
197	11 KV T-off Channel
198	T-off Channel holding clamp with Bolts and Nuts
199	11 KV Polymer Disc Insulator T&C Type
200	11 KV. Disc fitting T&C Type
201	P.G. Clamp
202	Stay Complete ( stay Rod 16x1800 mm, stay wire 5 Kg, stay clamp with nut and bolt.)
203	Holding Clamp for Top,Ms channel
204	Bracing set 4.3 x 4.3 Mtr Angle Iron 65x65x6 mm with holding clamp
205	11 KV E Bracket
206	Al Paint
207	Red Oxide Paint
208	MS Guarding Angle With Clamp
209	GI Wire 6 SWG
210	GI Wire 8 SWG
211	M S Channel 100x50 mm 2400 mm Long
212	G I Pipe 6\\" Dia
213	Holding Clamp for GI Pipe
214	Holding Clamp for cable
215	Lug for ACSR Weasel Conductor
216	H/S O/D 11 KV 3x185 sqmm J/kit
217	Part -B – WORKShifting, loading and carriage of following materials on private truck at store centre Padrauna & Un-loading of the same with proper stacking at work site.
218	8.5 Mtr PCC Pole
219	11 Mtr STP SP-55 Pole
220	ACSR Weasel Conductor
221	11 KV \\"V\\" tyoe cross arm 65x65x6 mm, M S Angle
222	Top Channel 100x50x6 mm, 2400 mm long
223	11 KV 3x185 XLPE Cable
224	Erection of Sectional T-Off ,Single pole structure on 8.5 Mtr PCC Pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories for Single circuit ( 'V' type cross arm 100 x 50 x 6 mm, M.S. Channel (7.9 Kg./M) clamps with bolt and nut, composite polymer pin, insulator, danger board with clamp, barbed wire earthing, etc. complete).
225	Erection of Single pole structure on 8.5 Mtr PCC Pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories for Single circuit ( 'V' type cross arm 100 x 50 x 6 mm, M.S. Channel (7.9 Kg./M) clamps with bolt and nut, composite polymer pin, insulator, danger board with clamp, barbed wire earthing, etc. complete).
226	Erection of Double pole structure on 8.5 Mtr PCC Pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories ((M.S. angle iron 65 x 65 x 6 mm bracing with clamps, 100x50mmX2240 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete)) .
227	Erection of Single pole structure on 11mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories for double circuit ( 'V' type cross arm 100 x 50 x 6 mm, M.S. Channel (7.9 Kg./M) clamps with bolt and nut, composite polymer pin, insulator, danger board with clamp, Alluminium paint, red oxide paint, barbed wire earthing, etc. complete).
228	Erection of Sectional T-Off ,Single pole structure on 11 Mtr ST Pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories for Single circuit ( 'V' type cross arm 100 x 50 x 6 mm, M.S. Channel (7.9 Kg./M) clamps with bolt and nut, composite polymer pin, insulator, danger board with clamp, barbed wire earthing, etc. complete).
229	Erection of End double pole structure for cable riser on 8.5 mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles , grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories (M S Channel 100x50 mm 2400 mm Long with clamps, 100x50mmX2240 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete).
230	Grouting of stay rods (16 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.
231	Guarding between two poles like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, cutting, fabrication and fixing of guarding channel 75 x 40 x 3010 mm with clamps nut & bolts etc. as per drawing.
232	Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.
233	Laying of 11 KV 3x185 mm² ‘XLPE’ cable of double circuit by digging pit & making trench in Proper size(1.2M depth x1M wide) below ground level by fixing bricks(4½˝)on both side of trench wall and 9˝ brick work at the centre of the trench along the cable.Fixing brick slab on top after filling sand around both the cable including cost of bricks/ as per site requirement HDD Method by drilling machine can be used.
234	Laying of 11 KV ‘XLPE’ cable in air after providing 6” dia GI pipe 3 m long & Looping work Complete.
235	Cable jointing charges of 11 KV XLPE Cable Outdoor
236	Special Pipe earthing up to water level for 11KV Jointing Kit
237	Chopping of branches of trees of eucalyptus, Neem, Keekar and other kind of trees along the route of the line and disposal of the same at suitable place. (Including existing line) Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Uttar Pradesh Tenders

Power Generation and Transmission Tenders

Sub Station Work Tenders

Substation Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Under The Electricity Secondary Works Division, Gorakhpur Under The Construction Of New 33/11 Kv Sub-Station Mahason (2X5 Mva), Construction Of New 33 Kv Mahason Line From 132/33 Kv Substation Raja Pakar For Proposed Ss Mahason And The Con, Kushinagar-Uttar Pradesh

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Under The Electricity Secondary Works Division, Gorakhpur Under The Construction Of New 33/11 Kv Sub-Station Mahason (2X5 Mva), Construction Of New 33 Kv Mahason Line From 132/33 Kv Substation Raja Pakar For Proposed Ss Mahason And The Con, Kushinagar-Uttar Pradesh

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us