|
| 1 | Part-A (Material Provided by Contractor) |
| 2 | Clamp for 33 KV \\"V\\" type Cross arm with bolts and nuts |
| 3 | F-bracket for 33 KV |
| 4 | Polymeric 33KV Pin Insulator |
| 5 | Number Plate with clamp and Nut & Bolt |
| 6 | Danger Plate with clamp and Nut & Bolt |
| 7 | G I Barbed Wire |
| 8 | Nut Bolt and washer all sizes |
| 9 | Earthing of Pole by M S Earthing Rod 20 x 2500 mm and 6 SWG earthing wire etc |
| 10 | 33 KV angle for side arm |
| 11 | Clamps for side arm angle |
| 12 | ‘E’ Bracket for 33 KV |
| 13 | Stay complete ( GI Stay ROD 20X1800mm , stay wire 7/8 SWG 10 kg, stay clamp, nut bolt and washer) |
| 14 | Holding Clamp for Top, MS droper channel |
| 15 | Disc Fitting for drop B&S type |
| 16 | Disc Insulator B&S Polymeric Type |
| 17 | PG Clamp Dog to Dog |
| 18 | MS Angle Iron 65x65x6 mm Bracing 4300 mm long |
| 19 | Holding clamp for Bracing Angle |
| 20 | M S Channel 100x50 mm 2400 mm Long |
| 21 | G I Pipe 6\\" Dia |
| 22 | Holding Clamp for GI Pipe |
| 23 | Holding Clamp for cable |
| 24 | Lug for ACSR Dog Conductor |
| 25 | Aluminium Paint |
| 26 | Red Oxide Paint |
| 27 | Stay Clamp |
| 28 | MS Guarding Angle |
| 29 | Guarding Angle Clamp |
| 30 | GI Wire 6 SWG |
| 31 | Gi Wire 8 SWG |
| 32 | 33 KV ‘XLPE’ C/J Kit 3x300mm² Outdoor |
| 33 | 33 KV ‘XLPE’ C/J Kit 3x300mm² Straight Through |
| 34 | HDPE 160 mm dia Pipe with all related fittings |
| 35 | PART – B- WORKShifting,loading and carriage of following materials on private truck at store centre Padrauna & Un-loading of the same with proper stacking at work site. |
| 36 | PCC Pole 9 Mtr Long |
| 37 | PCC Pole 11 Mtr Long |
| 38 | 11M, ST Pole SP - 55 Galvanised |
| 39 | 13M, ST Pole SP - 70 Galvanised |
| 40 | ACSR Dog Conductor. |
| 41 | 33KV \\"V\\" type Cross arm 100 x 50 x 6 mm, M.S. Chaneel |
| 42 | Top Channel 125x65 mm, 3200 mm long |
| 43 | 33 KV ‘XLPE’ Cable 3x300mm² |
| 44 | Laying of 33 KV 3x300Sq.mm, XLPE Cable including cost of Sand & Bricks , As per site requirement HDD (trenchless) method can be used. |
| 45 | Laying of HDPE 160 mm dia Pipe with all related fittings for laying of 33KV, 3x300Sq.mm, XLPE Cable with HDD (trenchless) method including cable laying. |
| 46 | Jointing charge of 33 KV ‘XLPE’ C/J Kit 3x300 mm² Outdoor /Straight Through |
| 47 | Labour charges for inserting of G.I. Pipe, Rising of 33 KV cable in air,looping of 33KV XLPE Cable and jumpering complete work. |
| 48 | Special GI Pipe earthing upto water level for 33 KV Jointing Kit with materials. |
| 49 | Erection of Single pole structure on 9 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (‘V' type cross arm 100 x 50 x 6 mm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, barbed wire earthing, etc. complete). |
| 50 | Erection of Single pole structure on 9 Mtr PCC Pole For Housing Side arm ,including all works of evocation of pit, pole erection, making plinth for poles, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (33 KV angle for side arm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, barbed wire earthing, etc. complete). |
| 51 | Erection of Double pole structure on 9 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete). |
| 52 | Erection of Four pole structure on 9 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete). |
| 53 | Erection of Double pole structure on 9 mtr PCC Pole for One side O/H and One side Cable Rising including all works of evocation of pit, pole erection, making plinth for Poles, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete) . |
| 54 | Erection of Double pole structure on 9 mtr PCC Pole for Cable Rising only including all works of evocation of pit, pole erection, making plinth for Poles, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete) . |
| 55 | Erection of Single pole structure on 11 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (‘V' type cross arm 100 x 50 x 6 mm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, barbed wire earthing, etc. complete). |
| 56 | Erection of Double pole structure on 11 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete). |
| 57 | Erection of Four pole structure on 11 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete). |
| 58 | Erection of Single pole structure on 11mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (clamps with bolt and nut, Aluminium paint, red oxide paint etc. complete). . |
| 59 | Erection of Double pole structure on 11 mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) . |
| 60 | Erection of Four pole structure on 11 mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) . |
| 61 | Erection of Double pole structure on11 mtr STP Pole for One side O/H and One side Cable Rising including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete) . |
| 62 | Erection of Double pole structure on11 mtr STP Pole for Cable Rising only including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete) . |
| 63 | Erection of Single pole structure on 13mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (clamps with bolt and nut, Aluminium paint, red oxide paint etc. complete). . |
| 64 | Erection of Double pole structure on 13 mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) . |
| 65 | Erection of Single pole structure on 11 Mtr ST Pole For Housing Side arm ,including all works of evocation of pit, pole erection, making plinth for poles, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (33 KV angle for side arm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, barbed wire earthing, etc. complete). |
| 66 | Erection of Single pole as stud pole structure on 9 mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (clamps with bolt and nut, Aluminium paint, red oxide paint etc. complete). . |
| 67 | Erection of Single pole as stud pole structure on 11 mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (clamps with bolt and nut, Aluminium paint, red oxide paint etc. complete). |
| 68 | Grouting of stay rods (20 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening &nozzling of stay wire with stay rod with the poles of required tension. |
| 69 | Fabrication of 13 mtr. Long S.T. /P.C.C. pole by welding 3 mtr. long 5” dia M.S. pipe and flat iron 50 x 6 mm 12” long by providing M.S. pipe. |
| 70 | Guarding between two poles like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, cutting, fabrication and fixing of guarding channel 75 x 40 x 3010 mm with clamps nut & bolts etc. |
| 71 | Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel. |
| 72 | Making Cable route marker with all materials |
| 73 | Tree Cutting Compensation Please Enable Macros to View BoQ information |
