Tender For Providing Of Certain Or Married Accommodation At Op Hill Raiwala
Tender Value
23.76 Crore
Estimated cost
Bid Submission
11 Aug 2026
12 days left
EMD
15 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Raiwala → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of Certain Or Married Accommodation At Op Hill Raiwala
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 25-Jun-2026 | date corrigendum | Date | 11-Jul-2026 |
| 2 | 03-Jul-2026 | Amendment to date | Date | 18-Jul-2026 |
| 3 | 10-Jul-2026 | DATE EXTENSION CORRIGENDUM | Date | 28-Jul-2026 |
| 4 | 20-Jul-2026 | date extn as on 20 Jul 2026 | Date | 04-Aug-2026 |
| 5 | 27-Jul-2026 | date extension as on 27 Jul 2026 | Date | 11-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | PHASE - ISCHEDULE 'A' PART-I (BUILDING WORK) |
| 2 | Construction of 01 x Building Block for 20 x OR's Married Accommodation (Quarters) upto (S+5) multistorey with stilt parking, Lift shaft, electric shaft, staircase, Fire escape stair case ,Lobby, Horizontal |
| 3 | Construction of 01 x Pump house with ramp etc complete all as specified, shown on drawing and directed. |
| 4 | Construction of 01 x 100000 Ltr capacity under ground circular RCC water sump complete all as shown on drawings and specified and directed |
| 5 | Construction of 01 x Garbage Bin complete all as shown on drawings and specified and directed |
| 6 | Total amount of SCHEDULE 'A' Part - II A(INTERNAL WATER SUPPLY)(For details see Sch 'A' in PDF folder) |
| 7 | SCHEDULE 'A' PART - II B (INTERNAL WATER SUPPLY) |
| 8 | S & F 15 mm bore two way bib cock with wall flange cast copper alloy , fancy type , chromium plated, screwed for for GI/ iron pipe or for brass ferrule including flange and fixed complete all as specified and directed. |
| 9 | S&F 15 mm dia bore Brass chromium plated wash hand basin mixer central hole for making (HOT & COLD) water fixed as per manufacturers manual along with accessories with long shunk and cup washers, screwed both ends for GI/ iron pipe or for brass ferrule including flange complete all as specified and directed. |
| 10 | S&F 15 mm dia bore Brass chromium plated wall mixture 2 in 1 system (HOT & COLD) with wall flange and two way suitable for GI/ iron pipe or for brass ferrule including flange and fittings including three joints to GI pipe or unions and plugging and screwing to walls , inluding L bend for mixing hot or cold for shower connection etc all as specified and directed. |
| 11 | S & F 15 mm bore Brass chromium plated sink mixer swinging spout (wall mounted model) (HOT & COLD) with connecting legs and wall flanges screw down for fixed to GI pipe or brass ferrule etc and fittings or for unions and fixed complete all as specified and directed. |
| 12 | S&F for brass chromium plated over head shower rose with 300 mm long CP shower arm 120 to 150 mm size (round/square pattern)revolving type multi-flow suitable for fixed to GI pipe and fittings or for unions and fixed complete all as specified and directed. |
| 13 | S&F for Health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible SS pipe tube and ABS wall hook including making connections and fixed in position complete in all as specified and directed. |
| 14 | SCHEDULE 'A' PART - III(INTERNAL ELECTIFICATION WORK) |
| 15 | M & L for point wiring using 1.50 sqmm size (Nominal Area) two single core PVC insulated, unsheathed , multi-stranded (FRLS-H) copper conductor cable 1100 volts grade , in and including medium duty concealed non metallic rigid PVC conduit 20 mm dia or hihger (not less than 20 mm dia) with and including its all necessary fittings and accessories with suitable size of sunk type of cast iron or 1.6 mm thick pressed steel terminal box duly painted for mounting fittings i.e, modular switch / sockets incl cover plate with frame and covered with 3 mm thick white bakelite / laminated hard glossy surface sheet top cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size stranded FRLS-H copper conductor cable as in earth wire and connecting all metal parts to common earth dolly incl cutting and chases pinning in for concealed conduit wiring and making good of disturbed surface complete all as specified and directed for the following up to Item No. 21: - (Note: Colour code shall be maintained as per IE rule) |
| 16 | One tube light/Bulb/ security light/ bell point controlled by one, one way switch 05 / 06 Amps. |
| 17 | One Ceiling fan point controlled by one, one way switch 05 / 06 Amps. |
| 18 | One Exhaust fan point controlled by one, one way switch 05 / 06 Amps. |
| 19 | One three pin 5 Amp socket on same board with other switches. |
| 20 | One three pin 5 Amp socket on independent board |
| 21 | One light point controlled by two 2 way switch |
| 22 | All as per above but one 3 pin socket outlet 15 Amp independent, with cable 2.5 Sq mm size, with earth continuity conductor of size 2.5 Sq mm. |
| 23 | S & F Call Bell AC 230 volt single pole etc complete all as specified and directed. |
| 24 | S & F modular switch single pole one way 5/6 Amps, 1 module complete all as specified & directed. |
| 25 | S & F modular bell push single pole one way 5/6 Amps, 1 module complete all as specified & directed. |
| 26 | S & F modular switch single pole two way 5/6 Amps, 1 module complete all as specified & directed. |
| 27 | S & F modular switch single pole one way 16/15 Amps, 2 module complete all as specified & directed. |
| 28 | S & F modular socket, 2/3 pin 5/6 Amp flush type, , 2 module complete all as specified & directed. |
| 29 | S & F modular socket, 2/3 pin 15/16 Amp flush type, , 2 module complete all as specified & directed. |
| 30 | S & F modular white cover plate with frame , 1 module, Fixing of modular boxes, cover plate with brass screw complete all as specified & directed. |
| 31 | S & F modular white cover plate with frame , 2 module, Fixing of modular boxes, cover plate with brass screw complete all as specified & directed. |
| 32 | S & F modular white cover plate with frame , 3 module , Fixing of modular boxes, cover plate with brass screw complete all as specified & directed. |
| 33 | S & F modular white cover plate with frame , 4 module , Fixing of modular boxes, cover plate with brass screw complete all as specified & directed. |
| 34 | S & F modular white cover plate with frame , 8 module ,Fixing of modular boxes, cover plate with brass screw complete all as specified & directed. |
| 35 | S & F modular metal flush box 1/2 moudle complete all as specified & directed. |
| 36 | S & F modular metal flush box 3 moudle complete all as specified & directed. |
| 37 | S & F modular metal flush box 4 moudle complete all as specified & directed. |
| 38 | S & F modular metal flush box 8 moudle complete all as specified & directed. |
| 39 | Supply & fixing of ceiling rose, 3 terminal , ISI marked surface bakelite suitable for batten fitting complete all as specified & directed. |
| 40 | Supply and fixing LED Bulb 10 W, 220 volt AC complete all as specified and directed. |
| 41 | Supply and fixing of lamp holder jumbo, PVC/ Polycorbonate type with back plate suitable for angle / batten fitting complete all as specified and directed. |
| 42 | S&F indoor type double door sheet metal enclosure VTPN MCB DB, 415 volt, 4 way ,50 Hz with insulated 250 Amps rated cooper bus bar with IP-43 DB's IK-09 flush mounted including 63 Amps MCCB 4 pole with breaking cap 16 KA with fixed thermal and fixed magnetic sting including for provn of MCCB as incomer including connecting terminal strip complete and SP MCB's as out going etc complete prewired with suitable size copper conductor.the DB'S shall hold type test certificate as per IEC 61439-3 complete all as specified and directed by Engr-in-charge.Make : Legrand/ Hager/Schneider.(note: MCB/MCCB shall be measured and paid separetaly) |
| 43 | S&F DB SPN, 240 volt with 200 Amps rated copper bus bar for double door 12 way IP-43, IK-09 suitabie for one MCB SPN as incoming and MCB SP as out going, mounting flush on wall and making good disturbed surfaces complete all as specified and directed. (note: MCBs shall be measured and paid separetaly) |
| 44 | S&F DB SPN, 240 volt with 200 Amps rated copper bus bar for double door 04 way IP-43, IK-09 suitabie for one MCB SPN as incoming and MCB SP as out going, mounting flush on wall and making good disturbed surfaces complete all as specified and directed.(note: MCBs shall be measured and paid separetaly) |
| 45 | S & F MCB SP, 6/ 5 to 32 Amps, 240 Volt 10 KA 'C' curve conforming to ISI marked complete all as specified & directed |
| 46 | S & F MCB SP, 40 to 63 Amps, 240 Volt 10 KA 'C' curve conforming to ISI markedI complete all as specified & directed |
| 47 | S&F sub Main Wiring with four single core PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x6.0 sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 1x6.0 sqmm size (green colour) cable as earthing lead onnecting to main earthing dolly drawn in and including not metallic PVC concealed conduit complete and making good to disturbed surface of wall/floor with cement mortar and finishes to match existing surface all as specified and directed. |
| 48 | S&F sub Main Wiring with four single core PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x 4.0 sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 1x4.0 sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in and including not metallic PVC concealed conduit complete and making good to disturbed surface of wall/floor with cement mortar and finishes to match existing surface all as specified and directed.( For AC Point) |
| 49 | Supply and fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 25 Amps complete all as directe |
| 50 | Supply & fixing LED lamp 10 watt, 220 volt decorative type connecting up with three core flexible copper conductor of suitable size from ceiling rose complete all as specified and directed |
| 51 | Supply & fixing LED light fitting 1x20 watt, 220 volt AC decorative box type with driver, holders, including LED tube light connecting up with three core flexible copper conductor of suitable size from ceiling rose complete all as specified and directed |
| 52 | Supply and fix exhaust fan PVC body AC single phase 230 V of size 200 mm sweep with blades and frame and louvers complete all as specified and directed. |
| 53 | Supply and fix exhaust fan steel body AC single phase 230 V of size 250 mm sweep with blades and frame and louvers complete all as specified and directed. |
| 54 | Supply and fixing BLDC Ceiling fan complete with blades, down rods, electronic fan regulator and accessories 230 Volts, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor with squirrel cage induction motor complete all as specified and directed. |
| 55 | Supply, fix, connecting and testing building LED security light fitting 35 W with pressure die cast aluminium housing, heat resistant toughened glass, IP 66 protection and impact resistance of IK 07 with 10KV Built-in Surge Protection Device, better optics for uniform distribution compete with electronic driver, including connecting up with three core copper conductor cable with 1.5 sqmm size copper wire from ceiling rose to connector of light fitting including GI bracket 32mm, 0.75m long bend to shape with clamp complete all as specified and directed. |
| 56 | Supply laying and testing cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured electric power cable heavy duty with stranded aluminium conductor 1100 volts grade of size 25 Sqmm 3.5 core on wall by necessary arrangement of MS Sheet clamps of suitable size required at site. |
| 57 | Fabrication, supply, installation, testing and commissioning electrical cubical control It panel box (INDOOR TYPE) Double door, CPRI approved an ISO 9001 factory assembled made indoor type wheather and vermin proof fabricated of 1.6 mm CRCA MS sheet of Suitable size,3 phase 4 wire 415 Volt ac 50 Hz complete duly painted with powder coating complete with locking arrangement, earthing terminals with suitable rating aluminium strips for incoming/ outgoing MCCB's including Phase indicator lamps with holder, toggle switches and MCBs etc including incoming and outgoing cables connections with suitable cable glands and end termination including grouting of LT panel box 60 cm above ground level by providing 105 cm long angle iron size 50x50x6mm welded onall four corner embedded in PCC (1:2:4) using 20mm graded upto 45cm complete all as specified and directed. (LT panel box shall be consisting the following).(a) 4 Nos electrolytic aluminium bus bars high conductivity aluminium alloy proper insulated of 1½ times of the incoming capacity with provision of extension and mounting on porcelain support. (b) MCCВ FP 125 amps, 25 KA, 415 volts, 50Hz (Adjustable type) = 01 No for (Incoming) (c) MCCB FP 63 amps, 25/30 KA, 415 volts, 50Hz (Thermal magnetic release and overload 80-100%) - 06 Nos (Outgoins for 05 Floor+1 stilt) Please Enable Macros to View BoQ information |
| 58 | Fabrication, supply, installation, testing and commissioning electrical cubical control It panel box (INDOOR TYPE) Double door, CPRI approved an ISO 9001 factory assembled made indoor type wheather and vermin proof fabricated of 1.6 mm CRCA MS sheet of Suitable size,3 phase 4 wire 415 Volt ac 50 Hz complete duly painted with powder coating complete with locking arrangement, earthing terminals with suitable rating aluminium strips for incoming/ outgoing MCCB's including Phase indicator lamps with holder, toggle switches and MCBs etc including incoming and outgoing cables connections with suitable cable glands and end termination including grouting of LT panel box 60 cm above ground level by providing 105 cm long angle iron size 50x50x6mm welded onall four corner embedded in PCC (1:2:4) using 20mm graded upto 45cm complete all as specified and directed. (LT panel box shall be consisting the following).(a) 4 Nos electrolytic aluminium bus bars high conductivity aluminium alloy proper insulated of 1½ times of the incoming capacity with provision of extension and mounting on porcelain support. (b) MCCВ FP 125 amps, 25 KA, 415 volts, 50Hz (Adjustable type) = 01 No for (Incoming) (c) MCCB FP 63 amps, 25/30 KA, 415 volts, 50Hz (Thermal magnetic release and overload 80-100%) - 06 Nos (Outgoins for 05 Floor+1 stilt) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 11, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 18, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 28, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 04, 2026
18:00 IST
Corrigendum-4 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 days
Aug 11, 2026
18:00 IST
Corrigendum-5 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 12 daysAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysAug 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender