Tender For Special Repair To Bldg No. P-126 (Or Barrack) And Bldg No P-126-127A (Dining Hall) At Mrc Sagar Under Ge Saugor
Tender Value
1.44 Crore
Estimated cost
Bid Submission
08 Jul 2026
3 days left
EMD
2.19 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Saugor → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No. P-126 (Or Barrack) And Bldg No P-126-127A (Dining Hall) At Mrc Sagar Under Ge Saugor
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 25-Jun-2026 | Rev BoQ | BOQ | 01-Jul-2026 |
| 2 | 01-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 08-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified covering/cladding to wall, fixed with self tapping screws as complete all as specified and directed. |
| 2 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof ridge covering/cladding to wall, fixed with self tapping screws as complete all as specified and directed. |
| 3 | Dismantling of wrought iron or mild steel work of any description not otherwise complete all as specified and directed. |
| 4 | S&F roof trusses ( framed), trused, purlin, crane gantries, raills and fastenings and heavy braket framing (beams, tee , angle,channel or flat sections) including distance pices, cleats base plate & gusset plates etc(welded/reviting) conforming to Fe 410-W (Gde-E250) quality 'A' complete all as specified and directed. |
| 5 | M&L Preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer of surfaces over 10cm width or girth, complete all as specified and directed. |
| 6 | S&F 1 mm thick steel sheet eaves gutters, galvanised class 3,150 mm dia half round with rounded edges complete all as specified and directed. |
| 7 | M&L for PCC ( 1: 2: 4) type B-1 (using 20 mm graded stone aggregate) etc on roof top as a leveling course / padding to maintain the slope,finished the surface even and fair without using extra cement complete all as specified & as directed . |
| 8 | M & L for 10mm thick plaster in CM 1:4 mixed with water proofing compound @ 3% by weight of cement applied over roof slab complete all as specified and directed. (Note : WPC will be paid separately) |
| 9 | M&L for water proofing roof treatment to RCC roof with approved modified membrane of weighing not less than 3 kg/Sqm including taking down of old roof treatment of any description including mud phushka, lime, concrete, tiles, cement plaster padding upto n exc 20 cm depth from roof surface etc including cleaning, brushing and watering to joints and grooves and removing debris to a distance exc 1.5 km complete all as specified and directed. The height of the roof may upto 9 m comprising with following items: -(i) The surface of roof, parapet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus, mass dust etc by wire brushing and dusting.(ii) Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kg per sqm to be applied on prepared surface till the surface is properly impregnated. (iii) Applying one coat of hot blown bitumen of 85/25 grade @ 1.20 kg/Sqm. (iv) Laying of water proofing APP modified polymeric water proofing membrane of weight not less than 3 Kg / sqm composed of 100 micron (+10% ) high density polyethylene sheet (HMHDPE) as center core, which is sandwiched between high quality polymeric bitumen mix having softening , high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps100 mm as per manufacture instruction etc.(v) Applying one coat of hot blown bitumen of 85/25 grade @ 1.20 kg/Sqm. (vi) Applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces, complete all as specified and directed by Engr-in-charge. |
| 10 | M&L for multi layer POP False ceiling of any shape (Square/Circular/Semi circular etc) of design and pattern approved by Engr-in-Charge, at site incl required GI frame work and Fibre mesh/ reinforcement (Horizontal & Vertical) with Putty/POP work for even and smooth finishing surface, painting two or more coat with Premium quality plastic emulsion paint over one coat primer over smooth finish POP surface incl required provn for spot lighting/ ceiling light incl all required fixture/ material incl dismantling of false ceiling bd complete in all respect as specified and directed. |
| 11 | S&F Rotational moulded polyethylene water storage tanks capacity 1000 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I and incl dismantling of old unserviceable Water tank and removing from site complete all as specified and directed. |
| 12 | M&L squared rubble walling regular coursed well bonded, bedded and solidly hearted, built in cement mortar (1:6) including demolition of stone masonry, built in cement mortar incl all quoins, arches, pillars, etc and removing of rubbish off the premises complete all as specified and directed. |
| 13 | Demolition of brickwork or stone/boulder masonry, built in cement or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified & directed. |
| 14 | M&L Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed. |
| 15 | M&L Brick work with with sub class 'B' bricks, straight orcurved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed. |
| 16 | M & L for rendering 15mm thick cement plaster on wall in cement mortar 1:6 on brick wall / Concrete surfaces of finishing the surfaces even and smooth without using extra cement etc. complete all as specified & directed. |
| 17 | M & L for rendering 20 mm thick cement plaster in cement mortar 1:6 on stone masonary fair faces / other than fair faces finished surfaces of brick wall finishing the surfaces even and smooth without using extra cement etc. complete all as specified & directed. |
| 18 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed. |
| 19 | Material and labour for plastering 20 mm thick on fair faces of stone masonary surfaces (on vertical surfaces) in cement mortar 1:4 with integral water proofing compound finished even and smooth without using extra cement complete all as specified and as directed. Note: - Water proofing compound shall be measured and paid for separately. |
| 20 | M & L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified and directed. |
| 21 | Material and labour for plastering 20 mm thick on fair faces of stone masonary surfaces (on vertical surfaces) in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed. |
| 22 | Material and labour for plastering 10 mm thick on fair faces of brick work or concrete surfaces on ceilings in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed. |
| 23 | Supplying only Integral waterproofing compound ISI marked complete all as specified and directed. |
| 24 | M&L non-skid coloured ceramic tiles 7 to 8 mm thick area of each tile exc 0.11 Sqm but not exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match coiour/shade including 15mm thick screed bed layer in CM 1:6 ncluding dismantling of floor, hearth tiling including cement mortar bedding and removing of rubbish off the premises complete all as specified and directed. |
| 25 | M&L non-skid coloured ceramic tiles 7 to 8 mm thick area of each tile exc 0.18 Sqm but not exc 0.38 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match coiour/shade including 15mm thick screed bed layer in CM 1:6 ncluding dismantling of floor, hearth tiling including cement mortar bedding and removing of rubbish off the premises complete all as specified and directed. |
| 26 | M&L glazed ceramic coloured tiles on vetical surfaces size 1200x600x7mm to 8 mm thick over & including 10mm thick rendering in CM 1:4 and tiles fixed in walls with wall tile adhesive and including dismantling of floor, hearth tiling including cement mortar bedding and removing of rubbish off the premises complete all as specified and directed. |
| 27 | Taking down chowkhats or frame exc 1.50 Sqm but n exc 4 Sqm each with shutters (with out taking off shutters from the frames) complete all as specified and directed. |
| 28 | Taking down chowkhats or frame n exc 1.50 Sqm each with shutters (with out taking off shutters from the frames) complete all as specified and directed. |
| 29 | Supply & fixing factory made PVC door frame of size 50 mm x 47 mm made out of 5 mm prelam PVC sheet cut at corner and jointed with 02 Nos 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided through out the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical number & minimum 02 Nos. for horizontal member) complete all as specified and directed. |
| 30 | S & F Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face,incl 03 Nos of 100mm size stainless steel butt hinges for each shutter, supplying & fixing in frame at site as per specification & drawing, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 31 | S&F pressed steel frames of size 125mm X 60mm with rebate on both side including necessary fixing lugs, hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) complete all as specified and directed. |
| 32 | S&F pressed steel frames of size 105 X 60 mm with one or more rebates including necessary fixing lugs, hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) complete all as specified and directed. |
| 33 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. |
| 34 | S&F 35mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc (without sash bars) edges of farrming plain chamfered or rounded fitted with cut and mitred beads for securing glass etc ,size of member of shutter as specified in SSR Part -I ,section 8,clause 8.20(a) supplied and fitted to chowkats complete all as specified and directed. |
| 35 | S&F 35mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc (with sash bars) edges of farrming plain chamfered or rounded fitted with cut and mitred beads for securing glass etc ,size of member of shutter as specified in SSR Part -I ,section 8,clause 8.20(a) supplied and fitted to chowkats complete all as specified and directed. |
| 36 | S&F stainless steel wire cloth 0.36 mm nomiral dia and wire and average width of aperture 1.40 mm fixed with stainless steel wire staples complete all as specified and directed |
| 37 | S&F 30mm thick 2nd class hardwood for window glazed and skeleton shutters open rebated and prepared to receive glass gauge etc (without sash bars) edges of farrming plain chamfered or rounded fitted with cut and mitred beads for securing glass etc ,size of member of shutter as specified in SSR Part -I ,section 8,clause 8.20(a) supplied and fitted to chowkats complete all as specified and directed. |
| 38 | S&F In repair stainless steel wire cloth 0.36 mm nomiral dia and wire and average width of aperture 1.40 mm fixed with stainless steel wire staples fixwed with wooden beadings complete all as specified and directed. |
| 39 | M&L for preparation of new wooden surfaces of any description, not otherwise described over 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 40 | M&L for Preparation of old painted wood/ wood based surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 41 | Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening,fixing of grill with wooeden beadings complete all as specified and directed. Note : (Weight not less than 2.5Kg/Sqm) |
| 42 | S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square nexc 0.5 sqm in each pane complete all as specified & directed.. |
| 43 | S&F butt hinges medium weight cold rolled mild steel of 125 mm and fixed with screw complete all as specified and directed |
| 44 | S&F aluminium anodised barrel tower bolts of extruded section, length of bolt in 200 mm and fixed with machine made screws complete all as specified and directed |
| 45 | S&F aluminium handles 150 mm size, cast type, anodised. and fixed with machine made screws complete all as specified and directed |
| 46 | S&F aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 47 | S&F powder coated anodised aluminium ventilator shutters, half portion will be fixed with 4mm thick frosted glass and half portion will be fixed with louvers with 4mm thick frusted glass with rubber gasket and aluminium beading ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia to be fixed over louvers portion, aluminium sections weighing 0.55 kg/m complete all as specified and directed. |
| 48 | M & L for prepration of newly plastered wall sufaces Finishing walls with Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. |
| 49 | M & L for prepration of new wall surfaces & applying birla / J. K. wall care white putty 2 mm thick for levelling the surfaces including properly making of v shape crakes and filling of all crakes with crakes seal of walls and applying two coat of interior acrylic emulsion paints over a coat of wall primer incl. preparation of surfaces of walls etc complete all as specified and directed. |
| 50 | M &L for applying three coats of white wash on newly plastered ceiling surfaces including preparation of these surfaces complete all as specified and directed. |
| 51 | M&L for complete removal of existing treatment on walls and prepration of old surfaces and applying two coats of exterior emulsion weather proof paint over one coat of exterior wall primer including properly making of v shape crakes and filling of all crakes with crakes seal of walls complete all as specified and directed. |
| 52 | M & L for complete removal of existing treatment on wall and prepration of old surfaces & applying birla / J. K. wall care white putty 2 mm thick for levelling the surfaces including properly making of v shape crakes and filling of all crakes with crakes seal of walls and applying two coat of interior emulsion paints over a coat of wall primer incl. preparation of surfaces of walls etc complete all as specified and directed. |
| 53 | M &L for applying two coats of white wash on old decorated ceiling surfaces including prepration of old surfaces complete all as specified and directed. |
| 54 | Demolition of PCC and pavings n exc 15 cm thickness below or above ground level (unreinforced) including removal of deberies complete all as specified and directed. |
| 55 | M&L for 25mm thick PCC (1:2:4) type B-1 using 20 mm graged stone aggregate as in floors finished rough to receive the tiles complete all as specified & directed. |
| 56 | M&L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in mass concrete as in foundation filling and mass concrete complete all as specified and directed. |
| 57 | M&L for 75mm thick PCC 1:3:6 type C-2, (using 40mm graded stone aggregates) as in plinth protection surface finished even and smooth without using extra cement & provided with construction joint on the interval not more than 3.0m and filled with bitumen and sand mortar in 1:3 complete all as specified and directed. |
| 58 | M&L for mirror polished Machine cut kota stone slab flooring 18-20 mm thick size not less than 600X1200 mm over 20 mm thick screed in CM(1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing including dismantling of Kota stones and tiles laid, bedded and pointed in any mortar of any description or thickness etc complete all as specified and directed complete. |
| 59 | M&L for Kota stone flooring 18-20 mm thick in riser of steps, skirting, dado etc mirror polished Machine cut Kota stone laid over and including 15 mm thick screed in CM(1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & mirror polishing including dismantling of Kota stones and tiles laid, bedded and pointed in any mortar of any description or thickness etc complete all as specified and directed |
| 60 | M&L for grinding and polishing mirror finish of existing Kota stone slab flooring complete all as specified and as directed. |
| 61 | M&L full body ceramic coloured tiles 10mm thick (square/ rectangular) tiles, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15mm thick screed bed layer in CM 1:6 ncluding dismantling of floor, hearth tiling including cement mortar bedding and removing of rubbish off the premises complete all as specified and directed. |
| 62 | All as per Srl item no. 60 above but in dado / skirting etc over 10 mm thick rendering in CM 1:4 complete all as specified and directed. |
| 63 | M&L for 16mm to 18mm thick Granite slab of any shade ( table rubbed and polished ) machine cut for floor /shelves in steps, jambs, pillars, window cills& cooking plateforms over 15 mm thick cement mortor 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match shade of the slabs laid bedded and pointed in any mortor complete all as specified and directed |
| 64 | M&L for rounding to the edge of stone slabs one edge such as in steps, cooking plateform and other similar situations complete all as specified &directed. |
| 65 | M&L for cutting chases, pinning in, Stone, concrete block or slab walls for concealed water tubing and making good, in cement mortor 1:3 cutting not exceeding 20cm girth complete all as specified and directed. |
| 66 | S&F 15mm Galvanised Mild steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors incl taking down 15 mm dia GI tubing and connection complete all as specified and directed. |
| 67 | S&F 20mm Galvanised Mild steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors including taking down 20 mm dia GI tubing and connection complete all as specified and directed. |
| 68 | S&F in repairs brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges fixed with and including chromium plated screws and wooden /plastic cleats (min wt 190 grams) complete all as specified & directed. |
| 69 | S& F in repairs looking mirror of selected quality glass 6 mm thick mounted on without frame, fixed with Stainless steel studs screws including with all accessories & fittings etc complete all as specified and directed. |
| 70 | S&F in repair vitreous china squatting pan “ORISSA” pattern size 580mm X 440mm, white with P or S trap front or back inlet with integral foot rest (excl flushing cistern & flush pipe) and including connection to trap & to flushing pipe anti syphonage pipe etc (excluding flushing cistern) complete including making good to floor complete all as specified and directed. |
| 71 | S & F in repair PVC valveless Syphonic action type, Flushing cistern 10 litres capacity low level, white with inlet ball valve float handle and flush pipe 32 mm bore and brackets,complete all as specified and directed. |
| 72 | S&F in repair CP Thin Rim Table top basin of size: 360x360x120 mm Jaquar code : SLS-WHT-6905 / Cera Code :A2020124SN / Kohler Code : K-90012T-0 in white colour with Click clack waste 32 mm size full thread with 130 mm height, Jaquar Code: ALD-BGP-727L130 / Cera Code :F8050301 / Kohler Code : K-20746IN-CP modern design with Round shape, slim edges, with tap hole, anti bacterial glaze on ceramic, smooth glaze surface incl fixing on plateform with all required accessories/ fixtures complete in all respect as specified and directed |
| 73 | S&F in repair urinal of size 360x345x570 mm white including f all accessories of fittings and assembly kit complete all as specified and directed. Model No - Parry ware Cat part No.- Whiz C0580 and kit C8123 OR Equivalent to Make - Parryware/cera/Hindware/somany |
| 74 | S&F in repair 32 mm bore dia Bottle Trap Size with 300 mm & 190 mm Long wall connection pipes & wall flange with incl required concealed pipe upto trap with required accessories complete in all respect as specified and directed. Make : Jaquar Code: ALD-BGP-769L300X190 / Cera Code : F4065103RG / Kohler Code : K-7314IN-RGD |
| 75 | S&F in repair sinks made of stainless steel 1mm thick kitchen or labortory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified & directed. |
| 76 | S&F in repairs 15 mm dia brass chromium plated long body Bib tap fancy type with capstan head screwed down for iron pipe complete all as specified and directed. |
| 77 | S & F in repairs brass chromium plated shower rose fancy type , as approved by GE, with or without swivel joints, including fixing to steel pipe complete all as specified and directed. |
| 78 | S&F PVC connections 15mm bore size 450 in length with both end brass/pvc high quality nuts complete all as specified and directed. |
| 79 | S&F in repairs stop valves/angle valve 15mm bore cast copper alloy chromium plated, fancy type, cast copper alloy screwed down, high pressure, with scrutch or butter fly handle screwed both ends for iron pipe or for unions, complete all as specified and directed. |
| 80 | S&F in repairs CP angle valve / concealed stop cock cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with capstan head screwed bnoth ends for iron pipe 15mm bore dia in repair, complete all as specified and directed. |
| 81 | S&F in repairs Drappery curtain rods decorative type stainless steel 304 Grade, 25mm nominal dia and having wall thickness 1.40 mm of approved quality/make including fixing of two number decorative brackets fixed in brick/concrete wall, Two number knob on both ends of curtain rods complete all as directed and specified. |
| 82 | S&F in repairs 110mm dia PVC (SWR) pipes single soketed in any length with rubber ring jointed laid in trenches or in floors complete all as specified and directed. |
| 83 | S&F in repairs 110mm dia PVC (SWR) pipes single soketed in any length with rubber ring jointed and fixed to walls complete all as specified and directed. |
| 84 | S&F in repairs 75 mm dia PVC (SWR) pipes single soketed in any length with rubber ring jointed laid in trenches or in floors complete all as specified and directed. |
| 85 | S&F in repairs 75 mm dia PVC (SWR) pipes single soketed in any length with rubber ring jointed fixed to wall complete all as specified and directed. |
| 86 | S&F PVC (SWR) bends 110 mm dia complete all as specified and directed. |
| 87 | S&F PVC (SWR) bends 110 mm dia with access door complete all as specified and directed. |
| 88 | S&F PVC (SWR) bends 75 mm dia complete all as specified and directed. |
| 89 | S&F PVC (SWR) bends 75 mm dia with accessable door complete all as specified and directed. |
| 90 | S&F PVC (SWR) 110 mm dia junction, single(single 'T') equal or unequal with acess door complete all as specified and directed. |
| 91 | S&F PVC (SWR) 75 mm dia junction, single(single 'T') equal or unequal complete all as specified and directed. |
| 92 | S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 93 | S& F in repairs of 75mm dia PVC (SWR) multi floor trap with Hinge type SS grating including jointing with solvent cement etc. complete all as specified and directed. |
| 94 | S& F stainless steel (Gde SS -304) rectangular Floor/marble insert Shower channel drain size 450 mm x 100mm x30 mm jointing with solvent cement etc. complete all as specified and directed. |
| 95 | Cutting holes in stone walls exc one brick wall but not exc two brick built in cement mortar for inserting hold fasts and making good dismentled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required complete all as specified and directed |
| 96 | Single leaf panic bar metal Fire door with all accessories (Frame 100x50x1.5mm,Shutter 46mm made from 2nos 1mm thick GI Sheet with infill of Honeycomb/Rockwool. Hinges 4nos SS 304 Fire rated UL Listed, Door Closer 80kg UL Listed Std. Arm. Fire rated, 1 Vision Panel 300x300x6mm Schott/Keralite Fire rated along with Gaskets, Single Point Panic Bar with Trim and Installation of doors as per ground.omplete all as specified and directed. |
| 97 | S&F 18/19 mm thick pre laminated paticle board, as in cupboards, shelves, pelmets etc sexterior grade, pre laminated one side decoraded choice lamination and other side balancing white lamination cut to required size and fixed to frame and corner finish with wooden beads and including polishing of wooden beads complete all as specified & directed. |
| 98 | M&L for 15mm thick Plastering in CM 1:4, with water proofing compound at the rate of 3% by weight of cement and finishing the surface even and fair.(WPC will be measured and paid seperately) in sunken portion including rubbish off the premises complete all as specified and directed. |
| 99 | M&L applying evenly two coats of industrial bitumen 85/25 at the rate of 1.20 Kg/Sqm in each coat over vertical surfaces and floors of sunken floors of toilet/bath including cleaning of surfaces complete all as specified and directed. |
| 100 | M&L PCC 1:7:12 type F2 using 40 mm graded Brick /stone aggregate as in filling (sunken portion) etc including removal of existing fillers complete all as specified and directed. |
| 101 | S& F 10mm thick Toughned glass as in ,Urinal partitions ,automatic doors and similar work including cutting to shape, drilling holes required.complete all as specified and directed. |
| 102 | S&F Machine pressed precast cement concrete coloured chemically treated rubber moulded interlocking paver block with grey cement and no pigment any shape and size confirming to IS 15658 - 2006 of 60mm thick, M-35 grade, incl laid on stone dust cusion of 25 mm thick complete all as specified and directed. |
| 103 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.for making ,sink units, wash area racks , SS racks ,counters etc complete all as specified and directed. |
| 104 | Note :- (i) The work described in these items shall be executed in bldgs up to (G+1) floor hence the contractor shall make scaffolding arrangements, trestles, ladders etc and hessian clothes for protection & all other safety precautions up to 02 storeys of buildings and the cost for the same is deemed to be included in the quoted unit rates.(ii) Arrangement of any required machinery / tools required for removing debris from terrace to ground and then remove to outside MOD land, will be made by the contractor and the cost for the same is deemed to be included in the quoted unit rates.(iii) Removing building materials /debris / old waste unwanted existing material of any description or any type etc. to a distance of 5km or beyond out side MOD Land. |
| 105 | Taking down copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switch, sockets, c/rose, lamp holders, tube light fittings, sketch fitting , wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall floor etc. complete all as specified and directed. |
| 106 | Taking down main switch, DB/change over/VTPN, MCCB AC box of any capacity complete all as specified and directed. |
| 107 | M&L for concealed point wiring with 1.5 Sqmm PVC-FRLSH insulated, sheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate with frame as per site requirement all fittings such as tees, bends, elbows, etc. of External diameter 20mm all as per site requirements PVC insulated & sheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and directed: - |
| 108 | For one light, fan point controlled by one switch |
| 109 | For one 5 Amp independent socket point controlled by one switch |
| 110 | For one 3 pin ,5 Amp socket point with other switch on the same board |
| 111 | All as per item No 106 here in before but for power point wiring using with 2.5 sqmm PVC-FR LSH insulated ,sheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,sheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead complete all as specified and directed. |
| 112 | S&F Modular switch, one way, 6 Amp 230, 1 module complete all as specified and directed. |
| 113 | S&F socket Modular 6 Amp-2/3 pin combined 2 module complete all as specified and directed. |
| 114 | S&F switch Modular, single pole, one way,16 Amp ,1 module 230 Volt complete all as specified and directed. |
| 115 | S&F socket modular 6/16 Amp, 2/3 pin combined ,2 module 230 Volt complete all as specified and directed. |
| 116 | S&F ceiling rose, surface backlite,three terminal complete all as specified and directed. |
| 117 | S&F Modular lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed. |
| 118 | S&F modular fan step regulator 60-80W 2 module complete all as specified and directed. |
| 119 | Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 120 | Supply and fixing LED light fitting mirror type withhigh out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 121 | S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. complete all as specified and directed. |
| 122 | S&F LED bulb 10 watt suitable for angle / batten holder fitting complete all as specified and directed. |
| 123 | Taking down and refixing ceiling fans complete all as specified and directed. |
| 124 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator,remote and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 125 | Supply and fix exhaust fan, steel body AC single Phase. 230V , 50Hz,1200 RPM copper winding of sweep 300 mm with blades, and frame and louvers complete all as specified and directed. |
| 126 | Supply and fix exhaust fan, steel body AC single Phase. 230V , 50Hz,1200 RPM copper winding of sweep 450 mm heavy duty with blades, and frame and louvers complete all as specified and directed. |
| 127 | M&L concealed sub main wiring with two single core PVC FRLS insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size 6 sqmm (for main current) drawn in & incl PVC conduit conduit less than 20mm dia ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed. |
| 128 | M&L concealed sub main wiring with two single core PVC FRLS insulated unsheathed stranded copper conductor cable FRLS, 04 runs of 01 Single core of size 10 sqmm (for main current) drawn in & incl PVC conduit conduit less than 25mm dia ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 10 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed. |
| 129 | S&F Modular AC box enclosure with socket plug top and MCB SP 25 Amps flush mounting enclosure complete all as specified and directed. |
| 130 | S&F Fancy Lights Sparkle Golden Wall Sconce Light, White Glass Globe, Gold Wall Lamp, Mid-Century Modern Style, Light Fixture (T-Wall lamp) complete all as specified and directed. |
| 131 | Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 132 | M&L for GI pipe bracket of size 40 mm dia medium grade of length not less than 1.5 Mtr long and bent to a shape incl fixing wall with 02 Nos MS flate clamp of suitable size incl nut bolt and washers complete all as specified and as directed. |
| 133 | Supply and fixing 6 - 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 134 | Supply and fixing 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 135 | All as per item no 130.00 above but for SPN 32 Amps, 240 V complete all as specified and directed. |
| 136 | S&F sheet metal enclosure DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 100-160 Amps rated bus bar of suitable size complete all as specified and directed. |
| 137 | S&F sheet metal enclosure DB double door, IP-43 when MCBs to be used SPN, 12 way, 240 V with 100-160 Amps rated bus bar of suitable size complete all as specified and directed. |
| 138 | S&F testing and commissioning of TPN 63 Amp 415 Volt 16 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed. |
| 139 | S&F double door metallic sheet metal enclosure DB double door(DPX-125 ) VTPN suitable for housing 100A MCCB as incomer 4 Way 415 Volts with 100-160 Amps rated bus bars complete all as specified and directed. |
| 140 | S&F MCCB 100 Amps 4 pole, suitable for 415 V breaking capacity 16 KA connected in wall/surface with wire and lugs complete all as specified and directed. |
| 141 | M&L for provn of Earthing complete with galvanised steel earth plate electrode, 600x600x6mm buried directly in ground (Earth pit not less than 2.25M deep below the GL) with top edge not less than 1.5 metres below ground level connected with galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel all as shown in electric plate no 3 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed.Note :- (i) The rate quoted shall also deemed to include the cost of GI wire and protection pipe upto 7.5 Mtr beyond the earth plates electrode and also the cost of the Test point. (ii) Joining of GI earth wire with pipe of the test point shall be done by using suitable cable lugs. |
| 142 | Supply, install, commissioning and testing of commercial Air curtain unitof size 58\\" X 78\\" for prevention of dust and conditioned air losses, single phase, 220 V, 50 HZ, made out of MS/CRCA sheet of minimum thickness 18 gauge finished with two coats of red oxide primer and final coat of synthetic enamel paint (oven baked) with MS CRC 18 gauge square perforated suction grills, Aluminium alloy fans and single phase electric motor, nozzles etc, complete with fittings and accessories so as to produce 1 - 1.5 m/sec air velocity at floor level for door opening complete all as specified and directed. |
| 143 | Supply and erect factory fabricated Rectangular square duct made out of 24 gauge GI sheet in L shaped hollow profile and all accessories such as corner, carriage bolt hangers, gasket and seal the longitudinal joints with and including approved sealant complete all as specified and directed. |
| 144 | Supply and fix desert cooler electric driven (single phase), having nominal air flow capacity of 30000 CuM per hour suitable for large room having windows doors upto 2500sqft with UV stablised high grade plastic/steel having four sides cooling paid for superior cooling complete all as specified and directed. |
| 145 | Supply and fix desert cooler electric driven (single phase), having nominal air flow capacity of 20000 CuM per hour suitable for large room having windows doors upto 1500sqft with UV stablised high grade plastic/steel having four sides cooling paid for superior cooling complete all as specified and directed. |
| 146 | Supply and fix exhaust fan, steel body AC single Phase. 230V , 50Hz,1200 RPM copper winding of sweep 450 mm with blades, and frame and louvers. Complete all as specified and directed. |
| 147 | Supply and fix exhaust fan, steel body AC single Phase. 230V , 50Hz,1200 RPM copper winding of sweep 600 mm with blades, and frame and louvers. Complete all as specified and directed. |
| 148 | Supply and Fix Aluminium double deflection grills with VCD complete all as specified and directed. |
| 149 | Supply and Fix fire retardant canvas connection at machine/cooler outlet complete all as specified and directed. |
| 150 | Taking down old service cable and Supply and laying cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 35 sqmm 3.5 core complete all as specified and directed. |
| 151 | Excavation in trenches n. exc 1.5 mtr wide and n. exc 1.5 mtr depth for laying of cable as the case may be and getting out hard / dense soil. |
| 152 | M & L for sand cushioning in trenches for the cable etc complete all as directed and as specified. |
| 153 | Returning filling, spreading, leveling, watering and well ramming in layers n. exc 25 cm thick complete all as specified and as directed. |
| 154 | Removing excavated surplus material n. exc 50 mtr and depositing where directed at a lvel n. exc 1.5 mtr from starting point. |
| 155 | Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150 mm x 40 mm complete all as specified and as directed. |
| 156 | S&F in replacement of GI Pipe light grade 40 mm dia ISI marked on pole on wall or laid in trenches incl all fittings (nut, bolt, clamps & washers) complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 01, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 08, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysJul 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender