|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil . |
| 2 | Ordinary rock |
| 3 | Hard rock (Blasting Prohibitted) |
| 4 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres. |
| 5 | Providing and laying good earth mixed with lime 12% and ramming compacting manually including all carriage complete. |
| 6 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 8 | Providing, febricating and fixing of steel gate 0.45m x 0.6m, angle iron frame and channel section (for manual opration) at inlet channel, & sluice valve chamber lid of size 0.60 m (breadth) x 0.90 m (length) with locking arrangement, at outlet channel complete job. |
| 9 | Centering and shuttering including strutting, propping etc, and removal of form for. (Wall any thickness) including attached pilasters, buttresses, plinth and string course etc. |
| 10 | Providing Laying and fitting of 300 mm dia MS pipe flanged with all necessary nuts, bolts, washers, gaskets, etc complete for washout / drain including all carriage complete. |
| 11 | Providing Laying and fitting of 200 mm dia MS pipe flanged with all necessary nuts, bolts, washers, gaskets, etc complete for washout / drain including all carriage complete. |
| 12 | Providing and fitting of sluice valve 300 mm for washout / drain including testing and all carriage complete. |
| 13 | Providing/laying and fitting of HDPE Pipe 90mm dia of grade (PE-100 and PN-16) including cost of pipe and fitting but excluding trench earth work. |
| 14 | Providing and laying HDPE sheet pond linner (300-500) micron, ISI mark approved brand and quality including carriagr and fixing of joints and overlap etc, as per the direction of incharge site-engineer. |
| 15 | Supplying, erecting and fixing angle iron 50x50x5mm post for fencing around pond, includind all nuts, bolts, etc with flat iron 5 mm thick complete with red oxide priming and panting all carriage complete. |
| 16 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia 4 mm. |
| 17 | Supplying,febrication and fixing MS gate with angle irion frame all complete with priming and painting complete (size 0.80mx1.5m). |
| 18 | Carriage of materials from source to actual site of work by MT. Sand and stone aggregate for an average lead of 10 km by MT, including loading, unloading and stacking complete. |
| 19 | Cement/Steel for an average lead of 10km by MT, including loading, unloading and stacking complete. |
| 20 | Stone for an average lead of 10km by MT, including loading, unloading and stacking complete. |
| 21 | Providing febrication and fixing MS sign board with angle frame of required size with priming, panting and lettering complete. Please Enable Macros to View BoQ information |
