Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | CIVIL WORK - SITE CLEARANCE & DISMANTELING |
| 2 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. |
| 3 | Cutting of trees, including cutting of trunks, branches and removal of stumps, roots, stacking of serviceable material with all lifts and up to a lead of 1000 metres and earth filling in the depression/pit.Mulia unskilled for cutting trees including cutting, refilling, compaction of backfilling and stacking of serviceable materials within 1000 metres lead by manual means.(Girth from 300 mm to 600 mm) |
| 4 | Cutting of trees, including cutting of trunks, branches and removal of stumps, roots, stacking of serviceable material with all lifts and up to a lead of 1000 metres and earth filling in the depression/pit.Mulia unskilled for cutting trees including cutting, refilling, compaction of backfilling and stacking of serviceable materials within 1000 metres lead by manual means.(Girth from 600 mm to 900 mm) |
| 5 | Earth work in ordinary soil within 50 m. initial lead and 1.5 m initial lift including ressing & breading clods to omaximum 5cm to 7cm & laying in layers not exceding 0.3 M in depth & as per direction of the Engineer-in-charge. |
| 6 | Filling in foundatin and plinth with sand watered and rammed including cost of sand & labour |
| 7 | Cement Concrete (1:4:8) using 40mm size hard granite metal approved quality from approved quarry including hoisting laying using concrete mixture and vibrators including cost, carriage, royality, cost of labour T.&P. etc complete and as directed by E.I.C. |
| 8 | R.C.C. M-25 grade with 20mm and down grade b.h. granite C.B. chips of approved quality from approved quarry including watering, curing, cost, carriage, royalty & taxes of all materials and labour, T&P etc complete. |
| 9 | Providing and Fixing,centering,shuttering of griders,beams,column including removal of form work at all depth and height. |
| 10 | Providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge and cost and carriage of steel etc complete. |
| 11 | Providing 12mm Outer cement plaster in cement mortar 1:6 inculding necessary scaffolding curring etc. All complete at all depth height for out side portion wall. |
| 12 | Finishing walls with water proofing cement paint of approved shade on old work one coat to give an even shade including cost of all labour ,materials & P with taxes ,transportation etc all complete. |
| 13 | Providing & painting two coats with weather coat paints to the outside surface of walls including, all cost of materials,labour,T & P etc.complete |
| 14 | Supplying of steel M.S. grill gate , as per direction of Engineer -in -charge. |
| 15 | Providing and Painting Two coat with Enamel paint over one coat primer to grill including cost of material, labours, T&P etc complete. |
| 16 | Enamel Painting two coats with any approved paint including cost of all labour, materials T & P with taxes, transportation etc all complete in Ground Floor.(AR- 2006 slno-20, pg-99) |
| 17 | Iron work wrought and put up in grated columns,beams and cage latrines (labour only) |
| 18 | SECURITY KIOSK |
| 19 | SECTION - I (FOUNDATION) Earth work in ordinary soil within 50 m. initial lead and 1.5 m initial lift including ressing & breading clods to maximum 5cm to 7cm & laying in layers not exceding 0.3 M in depth & as per direction of the Engineer-in-charge. |
| 20 | Filling foundation trenches and plinth with excavated material in layers not exceeding 0.3mtr. In depth including Watering and ramming and dressing and level or gradient, including cost of all labour with T & P required for the work etc. complete as directed by the Engineer-in-Charge. |
| 21 | Supply and filling foundationand plinth with filling sand including watering and ramming and dressing and levelling the top to proper level or gradient, including cost of all labour,sundries, T&P etc., complete as per direction of the Engineer-in-charge. |
| 22 | Providing and Laying plain cement concrete 1: 3: 6 .( 1 cement : 3 sand : 6 stone Aggregate 40mm nominal size ) As levelling coarse in foundation and plinth etc. complete all depth and height. complete as per direction of the Engineer-in-charge. |
| 23 | R.C.C work in ground floor of M-25 grade with 20mm & down grade crusher broken hard Granite chips including hoisting & laying with cost of all labour, materials with all taxes, lead ,T & P etc all complete .(AR- 2006 slno-3, pg-50) . |
| 24 | Providing and Fixing,centering,shuttering of griders,beams,column including removal of form work at all depth and height. |
| 25 | Providing, Cutting, bending , binding and placing in position of reniforcement steel (Fe550) for R.C.C work inculding the cost of 16 S.W.G binding wire, steel, labour tools and taxes etc. complete as per direction of the Engineer-in-charge. |
| 26 | Brick work with K.B. bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ± 8 percent in cement mortar (1:6) in foundation and plinth |
| 27 | SECTION - II (SUPER STRUCTURE)-R.C.C work in ground floor of M-25 grade with 20mm & down grade crusher broken hard Granite chips including hoisting & laying with cost of all labour, materials with all taxes, lead ,T & P etc all complete .(AR- 2006 slno-3, pg-50) . |
| 28 | Providing and Fixing,centering,shuttering of griders,beams,column including removal of form work at all depth and height. COLUMN |
| 29 | LINTEL & CHAJJA |
| 30 | ROOF BEAM |
| 31 | Providing, Cutting, bending , binding and placing in position of reinforcement steel (Fe550 HYSD) for R.C.C work inculding the cost of 16 S.W.G binding wire, steel, labour tools and taxes etc. complete as per direction of the Engineer-in-charge. |
| 32 | Brick work with K.B. bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ± 8 percent in cement mortar (1:4) brick masonary in super structure |
| 33 | Providing 12mm Outer cement plaster in cement mortar 1:6 inculding necessary scaffolding curring etc. All complete at all depth height for out side portion wall. |
| 34 | Providing 16mm Internal cement plaster in cement mortar 1:6 inculding necessary scaffolding curring etc. All complete at all depth height for in side |
| 35 | Providing 6mm thick cement plaster to the ceiling and R.C.C. surface with cement mortar (1:4) including cost of all materials labour T&P etc. |
| 36 | SECTION - III (FINISHING) - Fixing Tiles in floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles all complete with cost of precast tiles. (AR- 2006 slno-17, pg-89) |
| 37 | Fixing Tiles to dados skirting & risers of steps on 12mm. thick C.P (1:3) jointed with neat cement slurry mixed with pigments to match the shade of tiles all complete with cost of precast tiles.(AR- 2006 slno-17, pg-90) |
| 38 | Finishing plastered surfaces of walls with similar brand -(ASIAN PAINT,Berger,BIRLA WHITE) )Synthetic putty (interior wall puty) wall puty and making smooth to receive painting. |
| 39 | Providing & painting two coats with plastic emulsion paints over one coat of primer to the inside surface of walls including, all cost of materials,labour,T & P etc.complete and Priming one coat with any approved primer including cost of all labour, materials T & P with taxes, transportation etc all complete. |
| 40 | Finishing walls with water proofing cement paint of approved shade on old work one coat to give an even shade including cost of all labour ,materials & P with taxes ,transportation etc all complete. |
| 41 | Providing & painting two coats with weather coat paints to the outside surface of walls including, all cost of materials,labour,T & P etc.complete |
| 42 | Providing and fixing in position factory made Premium Stainless steel grade of 316 door shutter with frame and fixture ,Set Uin IS/BS 120 , 900 X 2100 mm SINGLE DOOR, Mortise Sash lock with cylinder and lever handle. All the operation shall be completed in all respect as per drawings, Manufacturers specifications and under the overall direction of Engineer-in-Charge Brand like-Hörmann, Jindal, Kinza, Megastar |
| 43 | Supplying of steel M.S. grill gate , as per direction of Engineer -in -charge. |
| 44 | Providing and fixing factory made uPVC white colour three track three panel fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) SOR - 2022, Page no - 235, Sl No - 12. |
| 45 | TICKET COUNTER WITH TOILET |
| 46 | SECTION - I (FOUNDATION) Earth work in ordinary soil within 50 m. initial lead and 1.5 m initial lift including ressing & breading clods to maximum 5cm to 7cm & laying in layers not exceding 0.3 M in depth & as per direction of the Engineer-in-charge. |
| 47 | Supply and filling foundationand plinth with filling sand including watering and ramming and dressing and levelling the top to proper level or gradient, including cost of all labour,sundries, T&P etc., complete as per direction of the Engineer-in-charge. |
| 48 | Providing and Laying plain cement concrete 1: 3: 6 .( 1 cement : 3 sand : 6 stone Aggregate 40mm nominal size ) As levelling coarse in foundation and plinth etc. complete all depth and height. complete as per direction of the Engineer-in-charge. |
| 49 | R.C.C work in ground floor of M-25 grade with 20mm & down grade crusher broken hard Granite chips including hoisting & laying with cost of all labour, materials with all taxes, lead ,T & P etc all complete .(AR- 2006 slno-3, pg-50) . |
| 50 | Providing and Fixing,centering,shuttering of griders,beams,column including removal of form work at all depth and height. |
| 51 | Providing, Cutting, bending , binding and placing in position of reniforcement steel (Fe550) for R.C.C work inculding the cost of 16 S.W.G binding wire, steel, labour tools and taxes etc. complete as per direction of the Engineer-in-charge. |
| 52 | Brick work with K.B. bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ± 8 percent in cement mortar (1:6) in foundation and plinth |
| 53 | SECTION - II (SUPER STRUCTURE)-R.C.C work in ground floor of M-25 grade with 20mm & down grade crusher broken hard Granite chips including hoisting & laying with cost of all labour, materials with all taxes, lead ,T & P etc all complete .(AR- 2006 slno-3, pg-50) . |
| 54 | Providing and Fixing,centering,shuttering of griders,beams,column including removal of form work at all depth and height. COLUMN |
| 55 | LINTEL & CHAJJA |
| 56 | ROOF BEAM |
| 57 | Providing, Cutting, bending , binding and placing in position of reinforcement steel (Fe550 HYSD) for R.C.C work inculding the cost of 16 S.W.G binding wire, steel, labour tools and taxes etc. complete as per direction of the Engineer-in-charge. |
| 58 | Brick work with K.B. bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ± 8 percent in cement mortar (1:4) brick masonary in super structure |
| 59 | Providing 12mm Outer cement plaster in cement mortar 1:6 inculding necessary scaffolding curring etc. All complete at all depth height for out side portion wall. |
| 60 | Providing 16mm Internal cement plaster in cement mortar 1:6 inculding necessary scaffolding curring etc. All complete at all depth height for in side |
| 61 | Providing 6mm thick cement plaster to the ceiling and R.C.C. surface with cement mortar (1:4) including cost of all materials labour T&P etc. |
| 62 | SECTION - III (FINISHING) - Fixing Tiles in floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles all complete with cost of precast tiles. (AR- 2006 slno-17, pg-89) |
| 63 | Fixing Tiles to dados skirting & risers of steps on 12mm. thick C.P (1:3) jointed with neat cement slurry mixed with pigments to match the shade of tiles all complete with cost of precast tiles.(AR- 2006 slno-17, pg-90) |
| 64 | Finishing plastered surfaces of walls with similar brand -(ASIAN PAINT,Berger,BIRLA WHITE) )Synthetic putty (interior wall puty) wall puty and making smooth to receive painting. |
| 65 | Providing & painting two coats with plastic emulsion paints over one coat of primer to the inside surface of walls including, all cost of materials,labour,T & P etc.complete and Priming one coat with any approved primer including cost of all labour, materials T & P with taxes, transportation etc all complete. |
| 66 | Providing & painting two coats with weather coat paints to the outside surface of walls including, all cost of materials,labour,T & P etc.complete |
| 67 | Providing and fixing in position factory made Stainless Premium steel grade of 316 door shutter with frame and fixture ,Set Uin IS/BS 120 , 900 X 2100 mm SINGLE DOOR, Mortise Sash lock with cylinder and lever handle. All the operation shall be completed in all respect as per drawings, Manufacturers specifications and under the overall direction of Engineer-in-Charge .Brand like-Hörmann, Jindal, Kinza, Megastar |
| 68 | Supplying of steel M.S. grill gate , as per direction of Engineer -in -charge. |
| 69 | Providing and fixing factory made uPVC white colour three track three panel fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) SOR - 2022, Page no - 235, Sl No - 12. |
| 70 | PAVER PATH WAY AND KERB STONE |
| 71 | Earth work in excavation of foundation in ordinary soil or gravelly soil including dressing and leveling the bed and disposal of the excavated materials within initial leads and lifts as per direction of E.I.C. |
| 72 | Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site by mechanical means within a lead of 5kms, spreading, grading to required slope and compacting to meet requirement of table 300-2 & Clause 305 of MoSRT&H Specifications for Road and Bridge Works (4th Revision). |
| 73 | Loosening, levelling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in table 300-2 for embankment construction & Clause 305 of MoSRT&H specifications for Road & Bridge works (4th Revision). |
| 74 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadum specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 406 of MoSRT&H specifications for Road & Bridge works (4th Revision). |
| 75 | Providing & laying moorum in road side berms using approved quality of moorum having P.I. value not more than six and CBR value not less than 20 collected from approved quarry in layers not exceeding 22.50 cm depth including watering & compacting with PRR, all leads & lifts, labour, T&P etc. complete as per specification to proper slope and gradient & direction of Engineer - in- Charge. |
| 76 | Supplying and fixing of Pre cast kerb stone of size 300mmX300MMX150MM OF M30 grade of approved make,design,colour and size made by block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758:1984. SR-2022 CHAPTER 25 ,SL NO-4 PAGE-234 |
| 77 | Providing and Laying plain cement concrete 1: 3: 6 .( 1 cement : 3 sand : 6 stone Aggregate 40mm nominal size ) As levelling coarse in foundation and plinth etc. complete all depth and height. complete as per direction of the Engineer-in-charge. |
| 78 | supply and fixing of 80 mm thick Cement.Concrete interlocking paver block of M-30 grade of approved make design colour and size made by block making machine with proper compaction laid in required pattern etc . complete in all respect conforming to IRC SP-63:2018. SR-2022 SL NO 25.17.1 PG-233. |
| 79 | Filling in foundatin and plinth with sand watered and rammed (Labour only)(AR- 2006 slno-15, pg-8) |
| 80 | LANDSCAPING & BEAUTIFICATION |
| 81 | Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). |
| 82 | Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation. |
| 83 | GRASS AREAS - Mixing earth and manure in proportion 8 : 1 and spreading to a thickness of 200mm. |
| 84 | Fine dressing the ground (to levels specified). |
| 85 | Flooding the ground with water including making kiaries and dismantling the same. |
| 86 | Pit preparation - Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) - Holes 1.2 m dia and 1.2 m deep |
| 87 | Holes 90 cm dia, and 90 cm deep |
| 88 | Holes 60 cm dia, and 60 cm deep |
| 89 | Holes 45 cm dia, and 45 cm deep. |
| 90 | MANURE AND GOOD EARTH - Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 5 k.m. lead complete (cattle manure measured in stacks will reduced by 8% for Payment). |
| 91 | Supplying and stacking sludge at site including royalty and carriage upto 5 km complete (sludge measured in stacks will be reduced by 8% for payment). |
| 92 | Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment). |
| 93 | Filling mixture of earth and sludge or manure in the desired proportion in trenches, flooding with water and leveling (cost of supplying earth and sludge or manure and mixing excluded). |
| 94 | TREES - Supply and stacking of Bauhinia purpurea (Kachnar) plant of height 150- 165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 95 | Supply and stacking of Cassia fistula (Amaltash) plant of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.. |
| 96 | Supply and stacking of Cassia siamea plant of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 97 | Supply and stacking of Chorisia speciosa plant of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 98 | Supply and stacking of Delonix regia (Gulmohar) plant of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge |
| 99 | Supply and stacking of Erythrina indica plant of height 150-165 cm. in big polybag of size 25 cm as per direction of the officer-in-charge. |
| 100 | SHRUBS - Providing and Displaying of Alpinia Variegated (three in one) plant having ht. 30 cm and above , with fresh and healthy variegated foliage in 25 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge |
| 101 | Providing and stacking of plant Canna dwarf of height 25 to 30 cm., 2 to 3 suckers in earthen pots of size 20 cm Earthen Pot/Plastic Pot and as perdirection of the officer-in-charge. |
| 102 | CREEPERS - Supply and stacking of Bougainvillea (Variety Butiana, Lady Mary Baring, Mahara, Mohan, Scarlet Queen, Varigata, Glabra Formosa, Peruviana Odissi, Partha, Subhra,Thimma, Spectabilis L.N Birla, Refulgens) plant of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. . |
| 103 | Supply and stacking of Clerodendrum splendens plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. |
| 104 | GROUND COVER PLANTS - Providing and Displaying of Duranta Golden plant, having ht.15 to 20 cm bushty shape plant with fresh and healthy leaves in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.. |
| 105 | Providing and stacking of Ficus long Island of height 15 cm to 20 cm, full of branches and foliage in 20 cm size of Earthen Pot / Plastic Pot & as perdirection of the officer-in-charge. |
| 106 | Providing and Displaying of Syngonium variegated plant,of height 30-45 cm. with 2-3 suckers healthy foliage in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge. |
| 107 | Providing and Displaying of Wedelia trilobata plant,full of leaves in 15 cm size of Poly bags & as per direction of the officer-in-charge. |
| 108 | SITTING BENCHES |
| 109 | Supplying and installation Sitting benches Capacity 03 Person,Size 5 ft X 2 ft X 3.5 ft Seating Height 2.5 Feet, 1. frp channel strip-seat & back with end cap (c section of thickness up to 5mm,1200mm long with wooden finish bolted to side frames) 2.Bench frame material Heavy Duty Cast Iron Seating Frame conforming to 1s1730 made from sand casting method) Paint Coated Color AS Per Finish etc complete as per the direction of Engineer . |
| 110 | WASTE DUSTBINS |
| 111 | Supplying and installation of dustbins are made of FRP in different cartoons shapes and painted with attractive colours of synthetic enamel paints like Height : 4 Feet. : Thickness : 5.6mm. : Capacity : 30 Liter having facility to drop from front and remove from behind door for specific design. dustbin having facilities to anchor with with 50mm hole dia pipe with 1mt length in concrete pedestal & fixing with SS chain . Finishes etc complete as per the direction of Engineer . |
| 112 | DRINKING WATER FACILITY |
| 113 | supply and installation of floor standing RO & UV Purifier water cooler having purification capacity upto 50L/hr , inlet storage capacity of 50ltr .Automation Grade Automatic Plant Area 461 X 582 X 1441 mm Number of Membranes in RO 3 230 V Max Water Recovery Rate 50-55 % Number of Filtration Passes 5 Purification Type.RO Water purifier and water cooler.RO Capacity (LPH) 50 LPH RO+UV+Sediment+carbon.Material of construction -outer pannel stainless steel AUS J1 grade .2nosof cold water compressor ,Hermitically sealer ,reciporting compressor ,condensor propeller fan refrigerant used R-134A .Temprature range 10-25 deg C,RO brand-Usha Cooler SS4080 and Lexpure 50LPH,KENT,Eureka Forbes Aquaguard Reviva ETC BRAND and including cost conveyance,taxes etc complete as per manufacturer's specification or complete as per the direction of Engineer . |
| 114 | SIGNAGE |
| 115 | Verious type of signages as per manufacturer's specification or complete as per the direction of Engineer Incharge.. |
| 116 | PLUMBING ,WATER SUPLLY & BOREWELL |
| 117 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. 20 mm nominal outer dia .Pipes. |
| 118 | 25 mm nominal outer dia .Pipes. |
| 119 | 32 mm nominal outer dia .Pipes. |
| 120 | 40 mm nominal outer dia .Pipes. |
| 121 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore |
| 122 | 40 mm nominal bore |
| 123 | 50 mm nominal bore |
| 124 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore |
| 125 | 20 mm nominal bore |
| 126 | 25 mm nominal bore |
| 127 | Providing and fixing gun metal non- return valve of approved quality (screwed end) : 65 mm nominal bore. Horizontal - |
| 128 | Vertical |
| 129 | 80 mm nominal bore - Horizontal |
| 130 | Vertical |
| 131 | Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) : 80 mm dia nominal bore |
| 132 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :180x150 mm size P type, With Sewer bricks conforming IS : 4885 |
| 133 | Fixing wash Down water closet , (European type W.C Pan) confirming to IS 2556: Part 8 -2004 ,to the ffloor with wooden plug and chromium plated screws joining the trap with ssoiil pipe in c.m(1:1) etc all complete as per specification. W.C. pan with ISI marked white solid plastic seat and lid |
| 134 | Fixing Flat back Small urinal confirming to IS 2556: Part 6 -1996 including connecting the urinal of size 31.5x26.5x44 cm sizes respectively with wash pipe by means of white lead mixed with chopped hemp etc all complete as per specifications. One urinal basin with 5 litre white P.V.C. automatic flushing cistern |
| 135 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: wash basin with hole (550x400) |
| 136 | fixing of pedestal for wash basin |
| 137 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore |
| 138 | Installation testing and commissioning of Health faucet of approved make & model. |
| 139 | Providing and fixing in position 75 mm N.B.UPVC. Nahani traps of self cleaning design including 100 mm dia UPVC grating, joining, embedding in concrete etc. complete rate to include making of opening in floor, marble / tiles, for fixing grating.(Inside the toilets & Kitchens) |
| 140 | Providing & fixing in position 80mm NB \\"P\\" type trap of self cleaning type (inlet to \\"P\\" trap to be 100mm dia) including brass 125mm dia CP grating, lead jointing embeding in concrete etc. all complete. |
| 141 | Providing and fixing on wall face unplasticised Rigid PVC soil, waste and rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes,…110 mm |
| 142 | BOREWELL - Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. 400 mm dia bore from GL to 30 m below GL |
| 143 | 400 mm dia bore from 90m to 160m and beyond below GL |
| 144 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.200 mm nominal size dia |
| 145 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 200 mm nominal size dia |
| 146 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of 200 mm dia |
| 147 | Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge |
| 148 | Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). |
| 149 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. |
| 150 | Providing and fixing brass full way 100 mm dia valve with C.I. wheel of approved make, tested to a pressure of 21 kg/sqcm. |
| 151 | Providing and fixing 100 mm dia gunmetal non return valve of approved make tested 21 kg / sqcm. |
| 152 | Providing and fixing GI pipe (heavy duty) confirming to IS 1239 with special fittings in external works including earthwork, excavation in all kind of soil including refilling, painting pipes & fitting with two coats of anti corrosive paint complete and all as directed by Engineer-in-Charge. |
| 153 | Providing and installing submersible pump suitable for 8\\"dia casing of bore with SS impeller, high tensile SS shaft, copper wound squirrel cage wet type induction motor 2880 rpm, 415 V, 50 Hz, 3 Phase AC supply, conforming to IS: 8034-1976, capacity 100 litre per minute at 70-120 m head along with adireclty coupled submersible type squirrel cage electric induction 1.5 HP motor suitable for operation on 400 V, 3 phase, 50 c.p.s AC supply, water lubricated bearings and provided with pivoted segment type thrust bearings to withstand non-vertical lead with minimum wear and tear and duly fitted with device to take up the expansion of water with heating of motor, including supply, testing and commissioning of electrical panel from the same manufacturer, complete with all accessories in all respects. The contractor to obtain approval for model and make of pumpset & suitable Electrical panel after having hield report of fully developed borewell and submit acutal bore strata chart.Insulated cable end termination along with its accessories complete as required. .Also supply and making straight through joint heat shrinkable type of size 4 x 4 sqmm copper |
| 154 | SOLARZIED STREET LIGHT |
| 155 | SOLAR STREET LIGHTING SYSTEM: * 30Watt Solar Semi Integrated street light (LED Make:Osram/Philips) * 24AH 12.8V LiFEPO4 Battery with mppt Charge Controller. * 75 Watt solar PV Module. * 1.Supply of 5m height 5 inch dia GI (Average dia tappered from bottom to top) tubular pole and at the bottom one base plate of size 30 x 30 x 5 mm having a through hole of size 14 mm dia at the centre of the ase plate with recuired nut and bolt with pole cap Pole with Light arm and PV Structure. 2.Painting of tubular pole with arms with ant coat of red oxide primer and two coats of aluminium paint and bottom one meter with black paint with supply of paints and labour. 3.Labour charges towards installation of 5 mtr height steel tubular pole including concreting of pole base and couping with supply of concreting materials as per following specification. Planting depth of,1.5 mtr pole pit size 1.2 x 1.2 x 1.8 m concreting- 1:4:8 with 4 cm HG metal size and couping of standard size into 40 cm X 40 cm X 50 cm with cement concreting 1:2:4 uaing 20 mm BHCBG chips. This includes the cost of all concreting materials, labour and hire charges of all T&P materials. The pole is to be installed in proper alignment as per the direction of Engineer in charge, and enclosed drawing and specification. Transportation & Installation charge with concrete work.Complete 5 years warranty. |
| 156 | INTERNAL ELECTRIFICATION |
| 157 | Recessed wiring to Light Point / Fan Point / Exhaust Fan Point / Call Bell Point with 1.50 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 5 Amp, 250 Volt piano type swich ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size, MS box with 1.0 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor of ISI marked as earth wire including all accesories and connection as per direction of engineer in charge. (Make of wire Finolex / L&T / Anchor / Havels / V Guard).a) Light point - Long |
| 158 | Light point - Midium |
| 159 | Light point - Short |
| 160 | b) Celling fan point - Long |
| 161 | Celling fan point - Midium |
| 162 | Celling fan point - Short |
| 163 | c) 5 A plug point |
| 164 | Recessed wiring for 15 / 16 Amp socket outlet with 2 X 4.00 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 5 Amp, 250 Volt piano type swich ISI marked, Phenolic laminated sheet of suitable size ISI marked MS box and earthing point with 1 X 2.50 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor for loop earthing etc. as required, as per direction of engineer in charge. (Make of wire Finolex / L&T / Anchor / Havels / V Guard) |
| 165 | Recessed wiring to Sub-Main in 2 X 2.50 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor of ISI marked with 20 mm dia non-metallic PVC heavy duty flexible conduit with 1.60 mm thick, along with 1 X 1.50 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor as earth wire as required as per direction of Engineer-in-Charge. (Make of wire Finolex / L&T / Anchor / Havels / V Guard) |
| 166 | Recessed wiring to Sub-Main in 2 X 4.00 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor of ISI marked with 25 mm dia non-metallic PVC heavy duty flexible conduit with 1.60 mm thick, along with 1 X 2.50 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor as earth wire as required as per direction of Engineer-in-Charge. (Make of wire Finolex / L&T / Anchor / Havels / V Guard) |
| 167 | Recessed wiring to Sub-Main in 2 X 10 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor of ISI marked with 25 mm dia non-metallic PVC heavy duty flexible conduit with 1.60 mm thick, along with 1 X 4 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor as earth wire as required as per direction of Engineer-in-Charge. (Make of wire Finolex / L&T / Anchor / Havels / V Guard) |
| 168 | Earthing with G.I earth pipe 3 mtr long 40 mm dia ISI mark including accessories and providing machinary enclosure with cover plate having locking arrengement and watering pipe etc. with charcol and salt etc. |
| 169 | Supply of material and installation of 50 mm dia 3 mtr long G.I pipe ISI mark safe earth electrodes (chemical earthing)including cost of electrode,earthing compound ,exacavation of earthing pit refilling etc as required -2nos |
| 170 | Providing and fixing G.I tape 20 mm X 3 mm thick on parapet of surface of wall for lightning conductor complete as per direction of Engineer-in-charge. |
| 171 | Providing and fixing Copper tape 32 mm X 6 mm from earth electrode directly in ground as required. |
| 172 | Supply , fixing and fitting of 11 watt LED BULB ( make Philips / Bajaj/ Cromption or Equivalent) |
| 173 | Supply & fixing of single spot light of 18 watts complete with 1 no. 18 watt of approved make complete with all necessary fixing materials including termination & labour ( make:- Philips/ Bajaj/ Crompton of Equivalent) |
| 174 | Supply, installation, Testting and commissioni of celling fan 1200 mm sweep 230/250 volts , 50 Hz, complete with suitable, clamp, downrod, blades, connections with 1.5 sq. mm PVC insulated copper conductor cable et as required and fan hook made of 16mm M.S. rod in R.C.C roof complete with all accessories. |
| 175 | Supply and Installation of 150mm sweep 2600 RPM, 400CMH (235CFM) (totally enclosed motor type exhaust fan (with bird screen) suitable for operation on 230Volts, 50 HZ single phase AC power supply along with its power point wiring (Supply, fixing, connection and testing of 3-pin 6 A power plug socket with/without 6A switch with top cover plate, PVC back box suitable for modular plate with all accessories to complete the job.) controlled by 6A switch and mounting plate with necessary accessories and gravity louvers shutters rigid frame with rubber mountings and conforming to IS-2312 (with latest amendments), including grouting of bolts for installation, supply of all materials required for interconnections complete as required as per drawing & site conditions and as directed by EIC. (Make- Crompton Greaves- Cat. Ref.-Flux Air 9\\") The Opening in wall/window for installation of exhaust will be provided by civil contractor. |
| 176 | Providing and fixing Single Pole MCB16amp with sheet steel enclosure, distribution board on surface / recess complete with tinned copper bus bar , neutral bus bar, earth bar, din bar, detachable gland plate inter connection phospate and powder painted including earthing etc. as per direction of Engineer-in-charge. |
| 177 | Supply, installation, testing and commissoning of 63amp TPN main switch of following capacity (IS 13940 part-3/19930 on existing surface / wall mounting and complete with HRC fuse links inter connections, earthing etc as per direction of Engineer-in-charge.9SEIMENS/HPL/ANCHOR/L&T/HAVELS/C&S/RK) |
| 178 | Add Overhead charges & Contractor Profit |
| 179 | Labour Cess |
| 180 | TOILET |
| 181 | Earth work in excavation of foundation in all kinds of soil within initial lead & 1.50m initial lift including rough dressing breaking clods to maximum 5cm to 7cm & laying in layers not exceeding 0.3m depth. |
| 182 | Filling Foundation and plinth with available excavated Earth including leveling and watering, all labour and matrials complete. |
| 183 | Filling foundation and plinth with sand watered and rammed.( per cum.) |
| 184 | Cement concrete (1:4:8) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, lead,T & P etc all complete . |
| 185 | Fixing,centering,shuttering R.C.C. Foundation, Plinth Band, Footings, Bases of Columns, Mass Concrete & Precast Slabs etc. in Ground Floor. Footing and Plinth Beam |
| 186 | Column |
| 187 | Roof Slab |
| 188 | R.C.C work in ground floor of M-25 grade with 20mm & down grade crusher broken hard Granite chips including hoisting & laying with cost of all labour, materials with all taxes, lead ,T & P etc all complete |
| 189 | Providing, Cutting, bending , binding and placing in position of reniforcement steel (Fe550) for R.C.C work inculding the cost of 16 S.W.G binding wire, steel, labour tools and taxes etc. complete as per direction of the Engineer-in-charge. |
| 190 | Brick work with K.B. bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ± 8 percent in cement mortar (1:6) in foundation and plinth |
| 191 | Brick masonary using Flyash bricks in CM (1:6) in Super-Structure with cost of all labour and materials, etc complete.(230x110x80). Super Structure |
| 192 | Parapet and Water tank Wall |
| 193 | 16 mm thick cement plaster in (1:6) with cost of all labour & materials. |
| 194 | Parapet and Water tank Wall |
| 195 | 12mm thick Cement Plaster (1:6) for brickwork including cost conveyance and royality etc complete. (inside) |
| 196 | Parapet and Water tank Wall |
| 197 | 6 mm thick Cement Plaster (1:4) to concrete surface. |
| 198 | Punning per Sqm. |
| 199 | Priming one coat with any approved primer (Iron work) (data for 9.3sqm.) (per sqm.) |
| 200 | Enamel Painting two coats with any approved paint including cost of all labour, materials T & P with taxes, transportation etc all complete in Ground Floor. |
| 201 | Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even receive painting including cost of scaffolding surface to staging charges with cost of all materials taxes, labour T&P etc complete. |
| 202 | Supplying ,Providing & Applying priming one coat with Cement primer of approved brand and manufacture on plaster surface at all elevations including all material & labour complete at all floors and all heights as per the direction of Engineer-In-Charge . |
| 203 | Wall painting 2 coats with Weather Coat of approved shade on new work to give an even shade in Ground Floor. |
| 204 | Wall painting 2 coats with Plastic Emulsion Paint of approved shade on new work to give an even shade in Ground Floor including cost and conveyance of all materials to site, and all labour charges complete as per direction of E.I.C.. |
| 205 | Fixing Tiles to dados skirting & risers of steps on 12mm. thick C.P (1:3) jointed with neat cement slurry mixed with pigments to match the shade of tiles all complete with cost of precast tiles. |
| 206 | Supplying, fitting & fixing of Non Digital (Plain) Wall Tile - (Make -Johnson(KKWG1200) / Khajaria/Somali) of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753 in dadoes, skirting and risers of steps laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge |
| 207 | Fixing Granite Stone 20mm thk. (above 0.40 sqm) in floors treads or steps and landing Fixing tiles in floors treads or steps and landing (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of precast tiles per 1 sqm |
| 208 | Fixing Tiles to dados skirting & risers of steps on 12mm. thick C.P (1:3) jointed with neat cement slurry mixed with pigments to match the shade of tiles all complete with & without cost of precast tiles. |
| 209 | 2.5 cm thick grading concrete (1:2:2) on roof slab with 6mm size hard granite chips. On new work per 1 sqm. |
| 210 | Supplying M.S. Grill, Gate made out of angle,flat and square bar including cost of transportation, taxes, painting Two coats enamel paint, one coat of priming etc.all complete. As per approved design and Direction of Engineer - In- Charge. (per Kg.) |
| 211 | Supplying , fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures (SOR 2022 Page 235 Sl No-13) |
| 212 | Providing all materials, labour, T & P for fitting and fixing of following size of 12 mm thick toughened glass for urinal partition of approved make in all floor with edge moulding & polishing with chromium plated brass screw, G/W Brackets 900 ( Double sided back plate) of DORMA make with all taxes, duties & transportation etc. All complete as per specification & direction of Engineer-In-Charge |
| 213 | Supplying, fitting and fixing of Stainless steel of 316 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32 mm x 32 mm x 2 mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. |
| 214 | Toilet Block Electrical Work - Recessed wiring to light point/Fan Point/Exhaust Fan Point/ Call Bell point with 1.5 Sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 6Amp, 250V Modular switch ISI marked and ceiling rose ISI marked mounted on Metal Box having front Modular cover of suitable size, Metal box with 1.5 Sqmm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Finolex/L&T/Anchor/Havells/V-Guard/KEI/RHINO/C&S). Group-A-L.P F.P- C.B.P- |
| 215 | Group-B-L.P F.P- C.B.P- |
| 216 | Supply and fixing of Modular switch, socket, etc - 6 Amp Switch (Modular Type) |
| 217 | 6 Amp Socket |
| 218 | 16 Amp Switch |
| 219 | 16 Amp Socket |
| 220 | Ceiling Rose |
| 221 | Exhaust Fan 9\\" size |
| 222 | Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6pin 6Amp & 16Amp socket outletand 16Amp Modular switches connection (make-Anchor/ Legrand /Roma) |
| 223 | S/F of 12watt Square Surface down light LED fitting (Make- Havels/Philips/Bajaj/Crompton/Helonix) ( GT- 04, LT- 04, PHT-02) |
| 224 | S/F of 32 AMP 25KA MCCB' of Hager Make with both side connections with all complete. |
| 225 | SEPTIC TANK |
| 226 | Earth work in excavation of foundation in hard soil or gravelly soil including dressing and leveling the bed and disposal of the excavated materials within initial leads and lifts as per direction of E.I.C. |
| 227 | Supplying & filling foundation and plinth with sand well watered and rammed including cost, cost of all labour, carriage, royalty, taxes, T&P etc complete. |
| 228 | Cement concrete (1:3:6) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, lead,T & P etc all complete .(AR- 2006 slno-3, pg-43) |
| 229 | Filling of 12mm aggregate in soak pit |
| 230 | R C.C. M-25 grade with 20mm and down grade b.h. granite C.B. chips of approved quality from approved quarry including watering, curing, cost, carriage, royalty & taxes of all materials and labour, T&P etc complete. |
| 231 | Providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge and cost and carriage of steel. etc. complete. |
| 232 | Brick work with Fly Ash bricks 23cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in Foundation and Plinth including watering curing, cost of carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. |
| 233 | Supplying and fixing 500 mm dia C.I cover (medium duty) without frame for manholes. Weight of the cover not less than 58 kg. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
