|
| 1 | Solar Mono perc Module Panel 545Wp. Technical specification:- GENERAL:- Dimensions (mm)-2278 X 1134 X 35 Weight(kg)- 29 ELECTRICAL FEATURE:- Maximum Power Pmax(W)-550 Maximum power Voltage Vmp (V)- 42.58 Maximum Power Current Imp (A)- 12.91 Open circuit Voltage Voc (V)-50.20 Short Curcuit Curent Isc(A) -13.89 Module Efficiency(%)- 21.30 MECHANICAL FEATURE:- Solar Cell Type-Mono PERC Bifacail, 182 X 91 mm Number of Cells-144 [12 X 6 || 12 X 6 ] Glass-3.2 mm Semi-toughened Safety Glass Frame - Anodiaed Aluminium Alloy J-Box - IP68/Waterproof PPO Cable - 4sq.mm. & 300mm DC Wire Number of Diodes -3 Connector - MC4 IP68 Compatitble (Make-RAYZON/SOLAR/HR/EQUIVALENT) |
| 2 | Solar Grid Tie PCU(Inverter) 30KW 3 Phase with Inbuilt :- INPUT SIDE :- Max.DC input Power(KW) -39 , Max.DC input Voltage (V) -1000, Start-up DC input Voltage (V) 250, MPPT Operating Range (V) -200-850,Max.DC input Current (A) - 40+40, Max.short Circuit Current (A) -60+60 OUTPUT SIDE :- Rated Output Power (KW) -30, Max.Active Power (KW) -33, Normal output voltage /range (V) -3L/N/PE 220-380V.230/400V, rated grid frequency (HZ) -50/60(Optional) ,Operating phase - Three Phase, Rated AC Grid output current (A) -45.05/43.05, Max.AC output Current (A) -50/47.09, Output power factor -0.8 leading to 0.8 lagging, Grid Current THD -< 3%, DC injection current(mA)<0.5% , Grid Frequency Range-47 -52 or 57-62 (Optional) EFFICIENCY:- Max.Effiency -98.06% ,Euro Effiency -97.08% ,MPPT Effiency-> 99% PRORECTION :- DC Reverse -Polarity Protection -Yes, AC Short Circure Protection -Yes, AC output Over Current Protection -Yes, Insulation Resistance protection -Yes, Ground Fault Monitoring-Yes, Anti-islanding Proction -Yes, Temperature Proction-Yes, Integrated DC switch-Yes, Remote spftware upload-Yes, Remote change of operating parameters-Yes, Surge Protection-Yes GENERAL DATA:- Topology- Transformerless, Running Temperature- -25-65°c, >45°c derating-<50dB, Coolind concept-smart cooling FEATUERES:- DC connection- MC-4 mateable, AC connection- IP 65 rated plug, Display- LCD 1602, Interface- RS485/RS232/WIFI/LAN (Make-DEYE/EASTMAN) |
| 3 | Supply,with materials for Module mounting Roof-Top sturcture (Make-NIZON/ JINDAL /BHUSHAN APPOLLO) |
| 4 | Soal DC cable 6sqmm 1 core(WAACAB/ POLYCAB/MICROTEK) |
| 5 | Supply of 30-40kw 3 phase ACDB Make with 415 volt,50Hz, 30-40kw, 4 core, Copper,Conductor material Transparent, UV protected, SPD, IP 66.(Make-GEESTS)sunseed power india schneider,thermosun,and Havells with similar. |
| 6 | Supply of 30-40kw DCDB Make with enclosure protection (IP 65) 5 input + 5 out put Fuse surge protection divice (SPD and cable termination).(Make-Reputed) |
| 7 | PVC conduit Pipe,& accessories etc. for cable laying (L.S)(Make-Reputed) |
| 8 | 70MM²,3½Core,Armoured,Aluminium Cable.(Make-HAVELLS/ POLYCAB/ FINOLEX/ KEI) |
| 9 | MC4 Connection Make with ratted voltage-100 Volt DC, ratted Current -17A (1.5MM²), 22.5A (2.5MM²) 39A( 4MM²/6MM²) 45A(10MM²),Safety class-100 V DC : || ,Crimping Termination(Make-Reputed)(L.S) |
| 10 | Supply fitting fixing of Spike type Lighting Arrester as per dirction of engineer charge. (Make-FORECAST/SIMILAR) |
| 11 | Supply, installation and testing of Maintenance free safe Earthing Electrodes with ISI G.I pipe dia 75mm as Secondary electrode with wall thickness of 2.6 mm and the Primary Earthing Electrode will be 50mm X 6mm X 1no M.S hot dipped galavanized strip filled with a highly conductive & non-corrosive compound in between the Primary Earthing and the secondary Earthing, the surface Area in will be 7,06,500sqmm for 3mtrs length and cross sectional primary conducting area is 300 sq.mm An Solid G.I Base plat seals the unit at the bottom and providing of masonry enclosure with cover plate.as per direction of Engg.-in-charg (MES- GFC ground Filling compound will be provided in 25 kgs Bags.) (MES-GFC ground Filling compound will be provided in 25 kgs Bags.) (2 bags required for each earthing electrode.) 2nos earthing connection all motors and 2nos earthing connect in all panel. |
| 12 | Supplying and laying 25mm X 6mm G.I earth strip ISI marked at 0.5 meter below grond level as strip earth electrode including soldering etc.as required.as per Direction of engineer Charges. |
| 13 | Labour charges for Installation ,Commissioning and testing of 30 Kw ON Grid Solar System consider @ 6% of material cost.(SL No From 01 To 10) |
| 14 | Add. Labour Cess @1% (Consider SL No From 01 To 10) Please Enable Macros to View BoQ information |
