Tender For Providing Retaining Wall Infront Of Crs Shop And To Provide Waiting Area With Sitting Benches In Tncsc Godown C Us In Upper Coonoor Shop In Coonoor Taluk At Nilgiris District.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
11 Jun 2026
0 days left
EMD
3150
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coonoor → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Retaining Wall Infront Of Crs Shop And To Provide Waiting Area With Sitting Benches In Tncsc Godown C Us In Upper Coonoor Shop In Coonoor Taluk At Nilgiris District.
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORK |
| 2 | Earth work excavation for foundation (for narrow excavation) in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed. |
| 3 | Supplying and filling in foundation and basement with clean M.SAND in layers of 150mm thick, well watered, rammed and consolidated including watering etc., complete complying with standard specifications and as directed. |
| 4 | CEMENT CONCRETE 1:5:10(one cement, five sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including mixing by mechanical means de-watering side shuttering , strutting, wherever necessary including curing etc., complete complying with standard specifications and as directed. |
| 5 | Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C.works including cost of steel, labour for straightening, bending, cranking, tying grills with 18 gauge galvanized binding wire and placing grills in position complete complying with standard specification and as directed.. |
| 6 | Plain Cement Concrete 1:2:4 ( one cement, two sand, four aggregate) using 20mm gauge hard broken granite stone jelly including dewatering, side shuttering, strutting, wherever necessary including curing etc., complete complying with standard specification and as directed. |
| 7 | Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild steel sheets of size 90cm x60cm 10gauge stiffened with welded mild steel angles of size 25mm x 25mm x 3mm laid with country wood joist of average of size 10cm x 6.50cm at about 90cm centers with casuarinas props of 13cm dia at 75cm centre to centre with all nails coir, wedges complete and removing the form work after necessary curing period as directed by the corporation officers. The rates should inclusive of cutting, bending, welding charges of M.S.sheets; M.S. angles etc complete complying with standard specification and as directed. |
| 8 | BRICK WORK in cement mortor 1:5 (one cement, five sand) using best quality second class chamber burnt bricks of size 9\\"x4 3/8\\"x2 3/4\\"for walls including cost of scaffolding curing, finishing etc.,complete complying with standard specifications and as directed. |
| 9 | Supplying , fabricating, hoisting and errection of MS angle TRUSSES & PURLIN of ISI size 50 X 50 X 6mm including drilling holes and painting the purlins with two coats of anticorrosive paint of approved colour over one coat of red oxide primer etc., complete complying with standard specification and as directed. |
| 10 | Supplying and laying of High profile colour galvalume sheet (as per ISI Standard) with combination 55A1:43 4Zn:1:6SI of TCT bent type 0.47mm thick not less than 150 GSM and standard width of 1.06m with yield strength of 550 MPA made from high tensile/ CR sheets of approved quality for roofing with necessary fixing arrangements like 65m and long hexagonal head screws with EPDM rubber seal etc., complete, complying with standard specification and as directed by the departmental officer. (Test certificate for quality should be furnished on receipt of material at site). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
May 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJun 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender