|
| 1 | Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to light/fan/call bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface] Average run 9 mtr ( PWD Ele E-11-D-2/d) |
| 2 | DistributionWiring in 1.1KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copperwire (BrandapprovedbyEIC) insuitablesizePVC casing-capping (Precision make) with1x22/0.3 (1.5sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl.necy.PVCclips,fittingsetc.to5A3 pinflushtype plug socket with pianokey type switch (Anchor make) fixedonsheet steel fabricatedCRCMSswitchboard withbakelite /perspex (wallmatching color) top cover of 3mm thick flushed inwall byhousing theboardafter cuttingbrick wall incl. necy. connection making earthing attachment, painting and mendinggood damages to building works [PVC casing-capping on surface and Switch board concealed] On Board ( PWD Ele E-12-7-a) |
| 3 | Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.( PWD E E-18-9(b)) |
| 4 | Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 2+4 way way Enclosure (607710) [Make: Legrand] ( PWD E D-9-13) |
| 5 | Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection.40 A DP [Make: Legrand] ( PWD E D-5-6) |
| 6 | Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail ofexisting DBs and necessary connection 6-32 A ( PWD E D-6-7) |
| 7 | Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling. ( PWD E E-13-22) |
| 8 | Supplying of 9 Watt LED Bulb. (Make: Bajaj / Crompton / Havells / Philips or equivalent reputed make) |
| 9 | Supplying and Fixing of 20 W LED Tube Light Set on wall including making connection etc. as required. |
| 10 | Supplying and fixing 415V, TPN on load front operated Changeover switch with Sheet Steel enclosureonangle iron frameonwall withnuts bolts etc 250A Havells/HPL or equivalent |
| 11 | Supplying&fixingsheetmetal (16SWG)IronClad Busbarchambersonangleironframeonwall, incl. Earthing attachment and paintingas required–( As per Drawing no. 470 of PWDSpecification Book – May 1991) 415 V, 1000 A, 4 Bars Dimension of Al. bars [85mm long] 4 x 100x15mm Dimension of Sheet Metal Box 500x150mm ( PWD E SOR D-12-19.a) |
| 12 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04Mts. longand 1x4 SWG GI (HotDip) wire (4Mts. long), 13 mmdia x 80mm long GI bolts,double nuts,double washers incl. S& F 15 mm dia GI pipe protectio (1Mts. long) tobe filled with bitumenpartly under the ground leve land partly above ground level driven to an average depth of 3.65 Mts.below the ground level as below: By TATA-Medium GI pipe [PWD SOR G-1 2-a] |
| 13 | Supplying & fixing earth busbar of galvanized (HotDip) MS flat 25mm x 6mm on wall having clearance of 6mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required |
| 14 | Labour for fitting and fixing high density poly-ethylene pipes or P.V.C. pipes for above ground work including cost of jointing materials paints etc. fitting and fixing all necessary specials, cutting pipes, making threads, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps(any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer-in-charge. (Payment will be made on centre line measurement of the total pipeline including specials.)B. Under ground 100 mm dia. / 110 mm dia. (PWD - 2017, Plumbing works, Page 12, Item (18 B) ) |
| 15 | SUPPLYING OF 120 SQMM 4 CORE XLPE INSULATED ALUMINUM CONDUCTOR ARMORED CABLES OF 1.1KV GRADE AS PER IS 7098 (PART 1) [I&WD Page 101] |
| 16 | Supply of High Density Poly-ethylene Pipe conforming to IS - 4984 - 1985 (Dia) [PE - 63] A. 6 Kg / Sq.Cm. (Working Pressure) (Dia) 110 mm (PWD - 2017, Plumbing works, Page 19, Item 20) |
| 17 | Supply and delivery of Wall fan 16” Sweep metal blade (UDMA Page 23 Sl 70) |
| 18 | Supplying of approved make exhaust fan heavy duty with mounting frame, blades AC 230-250. 300mm sweep RPM 900 / 1400 (12“) [I&WD Page 115, SL 5.3 G.5.3] |
| 19 | Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) 30 cm GI Exhaust fan (12\\") (PWD Elect D-14/32-a) |
| 20 | Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: 30 cm (12\\") (PWD Elect D-14/32-a) |
| 21 | GST 18 % |
| 22 | Cess 1% Please Enable Macros to View BoQ information |
