|
| 1 | Erection of pole of following length in cement concrete 1:3:6 (1 cemen 3 coarse sand: 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc. as required. Above 10.00 metre and unto 1200 metre |
| 2 | Supplying of two lengths of channel iron 75 mm X 40 mm X 6 mm(7.14 kg per metre) double pole cross arm for three wire 11KVover head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded onone side to the channel iron and with bolts and nuts on the otherside for tying the cross arms together, including drilling holes forinsulator pins/fittings, bolts, nuts and washers etc (as per drawing)and painting with primer and finish paint as required |
| 3 | Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg permetre) cross arm for 4 wire over head line complete with clamps,bolts, nuts and washer etc including drilling of holes for insulatorpins etc (as per drawing) and painting with primer and finishedpaint as required. (37 for O/H line & 16 Nos for cradling |
| 4 | Supplying and erection of 100 mm X 80 mm pin insulator completewith G. I. Spindle and nuts etc, as required. |
| 5 | Supplying and erection of bow stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate ofsize 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle(20 mm X 60 cm), 7/4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size)foundationincluding excavation and refilling and also with 0.6 m long braceof size 50 mm X 50 mm X 6 mm angle iron with 50 mm dia pulleyfixed at one end of the brace as required. |
| 6 | Dismantling of over head lines comprising of copper/aluminiumover head conductor, G.l. wire, cross arms, insulators etc. as required.(Dismantling Rabit conductor Incoming 0.60 Km X 4 WIRE -2400 Mtr X 214 Kg P/Kmtr X 1.05-539.28 KgChanel DP Bracket & Set X 3.15 Mtr X 2 Chanel (75 mm X 40 mm X 6 mm) 37.80 Mtr X 7.14Chanel SP Bracket 10 Set X1.90 Mtr (75 mm X 40 mm X 6 mm) 19 Mtr X 7.14 Kg P/Mir Kg P/Mtr -269.89 Kg135.66 Kg G.J Pin with Insulator 40 Nos X 0.35 Kg -14 Kggalvanised 'D' iron clamps completewith shackle insulator |
| 7 | Supply & Fixing of LT PVC Spacers Thickness 3-5 mm, Length 18 Inch |
| 8 | Dismantling of pole/ street light standard/strut embedded incement concrete foundation etc, as required. |
| 9 | Supplying and erection of a set of cross bracing FRLSame workfor 11 KV over head line double pole structure having four membersfabricated out of 50 mm X 50 mm X 6 mm angle iron to form a rectangle of minimum size 1400 mm width X 2500 mm height,complete with 50 mm X 6mm M.S. flat iron clamps, bolts andnuts including drilling holes for insulator pins, bolts and nuts etc(as per drawing) and painting with primer and finish paint as required |
| 10 | Supplying and erection of galvanised 'D' iron clamps completewith shackle insulator (100 mm X 110 mm), G.l. bolts. Inuts andwashers, coach screws etc, as required. |
| 11 | Supply of G.I. wire 8 SWG (Galvanized Iron Wire 125.00- Less 18% GST 19.07-105.93) (GI Wire for Earthing 0.60 Km X 131 Kg P Mtr X 1.05-82.53 Kg Cradling of GI Wire 5 places X 50 Mtr X 4 Wire X 0.131 Kg P Mtr X 1.05-137.55+ 1.5 Mtr X 20 places X 0.131Kg P Mtr X 5 places -19.65 Kg |
| 12 | Erection of G.I. Wire No. 8 SWG including binding etc. as required |
| 13 | Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter andabove including binding etc. as required. (Conductor 0.60 Km X 214 Kg P/Km X 1.05 X 4 Wire-539.28 Kg) |
| 14 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
