Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | PART-A:- CIVIL Works related items |
| 2 | Deployment of Facility Manager for heading the entire team and single point of contact & overall incharge of FM on site operators and reporting to Engineer-in-charge or his representative. |
| 3 | Deployment of unskilled manpower for day to day maintenance and upkeeping works like sweeping, cleaning, grass cutting, gardening, roof cleaning, garbage cleaning, drain cleaning, surface dressing, outside washroom cleaning, valve operation, material handleling at Filter plant, Loading-unloading & carriage of materials, assistance jobs of masonry,carpenter,plumbing etc. and other miscellaneous works at Dishergarh Colony and Dishergarh Filter plant as, when and where required as per instruction of EIC. |
| 4 | Garbage Cleaning: Cleaning and removing conservancy garbage mixed with rubbish & other filthy materials from the road side flank, drain and compound including cutting, loading, unloading to and from truck or cart by Mathor labour & removing the same to any distance. |
| 5 | Regular cutting of bushes, grass,vegetations of open area arround the block and berm with grass cutting machine (Operation based on Petrol) to required shape and stacking of grasses to a lead of 50.00 m and lift of 1.5m. |
| 6 | Cleaning and sweeping of all types of roads with labours, tools & plants and removing the same otside the colony areas. (All Roads to cleaned and sweeped once in a week on regular basis.) |
| 7 | Fooging with smoker mixed with diesel @ 8 ml smoker with one litre of diesel twice per month as per direction of Engineer-in-charge (treatment to be done using spray machine along with proper safety provisions for sprayer like mask etc). |
| 8 | General pest control with Malathion 50% EC and Nuvan 75% EC (2 ml Malathion & 6 ml Nuvan to be mixed with 1 litre water) for inddor as well as outdoor treatment once in a month as per direction of Engineer-in-charge. (Treatment to be done using spray machine along with proper safety provisions like mask etc.) |
| 9 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 10 | Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil |
| 11 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 12 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns |
| 14 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15* landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to foor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form for Shelves (Cast in situ) |
| 16 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 17 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 18 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 19 | Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : Cement mortar 1:6 (1 cement : 6 Coarse sand) |
| 20 | Half brick masonry with non modular fly ash bricks of class designation 10, conformingio IS :12894, in super structure above plinth and upto floor V level. Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 21 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 22 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : cement mortar 1:4 (1 cement : 4 coarse sand) |
| 23 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) |
| 24 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) |
| 25 | 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) |
| 26 | Neat cement punning. |
| 27 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer |
| 28 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 29 | Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer's specification. One or more coats on old work |
| 30 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work |
| 31 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 32 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 33 | Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm) |
| 34 | Finishing walls with water proofing cement paint of required shade : Old work (one or more coats @ 2.20 kg/10 sqm) complete. |
| 35 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 36 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 37 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work |
| 38 | White washing with lime to give an even shade : Old work (two or more coats) |
| 39 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 40 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 41 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 42 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size Size of Tile 600 x 600 mm |
| 43 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm |
| 44 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm |
| 45 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm |
| 46 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood |
| 47 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 48 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws |
| 49 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer-in-charge Extruded section profile size 48x40 mm |
| 50 | Providing and fixing to existing door frames. 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). |
| 51 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) |
| 52 | Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer- in-charge.(Payment of providing and fixing auto closing hinges shall be paid separately) |
| 53 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick |
| 54 | Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge. |
| 55 | Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge. 200 mm |
| 56 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below |
| 57 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding |
| 58 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 59 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 60 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides |
| 61 | Renewing bottom rail and/or top runner of collapsible gate including making good all damages and applying priming coat of zinc chromate yellow primer of approved brand and manufacturer. |
| 62 | Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts/welding and erection etc. complete. Wheel 50 mm dia and below |
| 63 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal dia Pipes |
| 64 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal dia Pipes |
| 65 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls 15 mm nominal dia Pipes |
| 66 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls 20 mm nominal dia Pipes |
| 67 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 80 mm dia nominal bore |
| 68 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 69 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter |
| 70 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter |
| 71 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door 75x75x75 mm |
| 72 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door 110x110x110 mm |
| 73 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 75 mm bend |
| 74 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm bend |
| 75 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) 110 mm Shoe |
| 76 | Providing and fixing unplasticised PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete. 75 mm |
| 77 | Providing and fixing unplasticised PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete. 110 mm |
| 78 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 79 | Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws cmplete: Ridges plain (500 - 600mm) |
| 80 | Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) |
| 81 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) |
| 82 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate |
| 83 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red Area of slab over 0.50 sqm |
| 84 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work |
| 85 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink asper IS:13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making goodthe walls wherever required : Kitchen sink without drain board 610x510 mm bowl depth 200 mm |
| 86 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brasspillar taps, 32 mm C.P. brass waste of standard pattern, includingpainting of fittings and brackets, cutting and making good the wallswherever require: White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap |
| 87 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with \\"S\\" or \\"P\\" trap including dismantling of old WC seat and \\"S\\" or \\"P\\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in-charge. Orissa pattern W.C Pan of size 580x440 mm |
| 88 | Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level whiteP.V.C. flushing cistern, including flush pipe, with manually controlleddevice (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls andfloors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 89 | Providing and fxing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing I paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 90 | Providing and fxing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing I paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fxing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of pqwder coating 50 micron) |
| 91 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) |
| 92 | Providing and fixing Zinc powder coated star lock (natural white) complete as per directions of Engineer- in-charge. |
| 93 | Providing and fixing PVC roller for aluminium sliding windows complete as per directions of Engineer- in-charge. |
| 94 | Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. Bars upto 12 mm diameter |
| 95 | Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make |
| 96 | Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2). 25 mm average thickness in 2 layers. |
| 97 | 6 mm plaster on cement concrete or reinforced cement concrete work with white cement based polymer modified self curing mortar of approved make as per the direction of Engineer-In-Charge. |
| 98 | Supplying & fixing of Chicken Mesh Net of mesh size 12.5 x 12.5 mm made with 22 gauge galvanized steel wire for plastering the cracked vertical surfaces of buildings at all height as per direction of Engineer-in-Charge. |
| 99 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 100 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
| 101 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below |
| 102 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 103 | Carriage of Materials By Mechanical Transport including loading,unloading and stacking: Lime, moorum, building rubbish Lead - 5 km |
| 104 | Hiring of Hydraulic Excavator (3D) of 1 cum bucket size with driver and fuel. |
| 105 | Supply of 20 mm aggregates |
| 106 | Supply of 10 mm aggregates |
| 107 | Supply of wire brush |
| 108 | Supply of Cement |
| 109 | Supply of White cement |
| 110 | Supply of C.P. Brass Extension Nipple (1/2\\"x2\\" size) |
| 111 | Supply of Bright finished or black enamelled mild steel butt hinges 125x65x2.12 mm |
| 112 | Supply of Bright finished or black enamelled mild steel butt hinges 100x58x1.90 mm |
| 113 | Supply of Oxidised mild steel sliding door bolt 250x16 mm |
| 114 | Supply of Oxidised mild steel tower bolt black finished (barrel type) 200x10 mm |
| 115 | Supply of Oxidised mild steel handles 125 mm |
| 116 | Supply of Oxidise MS hasps and staples (safety type) 115 mm |
| 117 | Supply of Anodised Aluminium tower bolt (barrel type)100x10 mm |
| 118 | Supply of Anodised Aluminium handles 125 mm with plate 175 x 32 mm |
| 119 | Supply of Glue |
| 120 | Supply of wooden putty |
| 121 | Supply of Coarse Sand |
| 122 | Supply of fine sand |
| 123 | Supply of Nuts & bolts upto 300 mm length |
| 124 | Supply of Wire nails |
| 125 | Supply of acid for tile cleaning |
| 126 | Supply of Bleaching powder |
| 127 | Supply of brass stop cock 15 mm dia |
| 128 | Supply of brass ferrule 20 mm dia |
| 129 | Supply of brass ferrule 25 mm dia |
| 130 | Supply of Mirror of superior make glass 60x45 cm |
| 131 | Supply of Pig lead |
| 132 | Supply of G.I. Union 25 mm nominal bore |
| 133 | Supply of G.I. Union 50 mm nominal bore |
| 134 | Supply of Unplasticised P.V.C.connection pipe with brass union 45 cm long 15 mm bore |
| 135 | Supply of White plastic seat (solid)with lid C.P.brass hinges and rubber buffers |
| 136 | Supply of Shower rose C.P.brass for 15 to 20 mm inlet 100 mm dia |
| 137 | Supply of 20 mm dia Gunmetal gate valve with wheel |
| 138 | Supply of Brass full way valve with C.I. wheel (screwed end) 25 mm dia |
| 139 | Supply of Brass full way valve with C.I. wheel (screwed end) 40 mm dia |
| 140 | Supply of Brass full way valve with C.I. wheel (screwed end) 50 mm dia |
| 141 | Supply of Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 142 | Supply of Anodised Aluminium hanging type door stopper |
| 143 | Supply of EPDM Valve gasket |
| 144 | Supply of Flexible (coil shaped) PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings |
| 145 | Supply of C.P. Brass bibcock 15 mm ISI Marked |
| 146 | Supply of C.P. Brass angle valve 15 mm ISI Marked |
| 147 | Supply of Flushing Cistern P.V.C. 10 lts capacity (low level) (White) (with ISI Marked) |
| 148 | Supply of 15 mm PTMT bib cock ISI Marked |
| 149 | Supply of PTMT grating 100 mm dia. |
| 150 | Supply of PTMT Ball Cock 25mm Complete with Epoxy Coated Aluminium Road & H.D. Ball |
| 151 | Supply of Fly ash bricks conforming to I.S. 12894 |
| 152 | Supply of P.T.M.T. extension nipple 15mm |
| 153 | Supply of Stainless steel screws 50 mm |
| 154 | Supply of Stainless steel screws 40 mm |
| 155 | Supply of Stainless steel screws 30 mm |
| 156 | Supply of Stainless steel screws 20 mm |
| 157 | Supply of Stainless steel butt hinges 75x47x1.8 mm IS : 12817 marked |
| 158 | Supply of G I binding wire |
| 159 | Supply of spindle and lock (check nut) of sluice valve size of spindle 30mm to 40mm dia & 650mm long (spindle ring welded with spindle rod) (M.S. Spindle) |
| 160 | Supply of spindle and lock (check nut) of sluice valve size of spindle 25mm to 30mm dia & 650mm long (spindle ring welded with spindle rod) (M.S. Spindle) |
| 161 | Supply of spindle and lock (check nut) of sluice valve size of spindle 20mm to 25mm dia & 550mm long (spindle ring welded with spindle rod) (M.S. Spindle) |
| 162 | Supply of spindle and lock (check nut) of sluice valve size of spindle 16mm to 20mm dia & 450mm long (spindle ring welded with spindle rod) (M.S. Spindle) |
| 163 | Supply of 80 ASTM medium duty PVC pipe, 15mm dia |
| 164 | Supply of 80 ASTM medium duty PVC pipe, 20 mm dia |
| 165 | Supply of 80 ASTM medium duty PVC pipe, 25 mm dia |
| 166 | Supply of 80 ASTM medium duty PVC pipe, 50 mm dia |
| 167 | Supply of 80 ASTM medium duty PVC pipe 15x15x15mm dia Tee |
| 168 | Supply of 80 ASTM medium duty PVC pipe 20x20x20mm dia Tee |
| 169 | Supply of 80 ASTM medium duty PVC pipe 25x25x25mm dia Tee |
| 170 | Supply of 80 ASTM medium duty PVC pipe 40x40x40mm dia Tee |
| 171 | Supply of 80 ASTM medium duty PVC pipe 15x15mm dia Elbow |
| 172 | Supply of 80 ASTM medium duty PVC pipe 20x20mm dia Elbow |
| 173 | Supply of 80 ASTM medium duty PVC pipe 25x25mm dia Elbow |
| 174 | Supply of 80 ASTM medium duty PVC pipe 50x50mm dia Elbow |
| 175 | Supply of 80 ASTM medium duty PVC pipe 15mm dia Socket |
| 176 | Supply of 80 ASTM medium duty PVC pipe 20mm dia Socket |
| 177 | Supply of 80 ASTM medium duty PVC pipe 25mm dia Socket |
| 178 | Supply of 80 ASTM medium duty PVC pipe 50mm dia Socket |
| 179 | Supply of 80 ASTM medium duty PVC pipe 15mm dia Male Threaded Adapter (Brass) |
| 180 | Supply of 80 ASTM medium duty PVC pipe 20mm dia Male Threaded Adapter (Brass) |
| 181 | Supply of 80 ASTM medium duty PVC pipe 25mm dia Male Threaded Adapter (Brass) |
| 182 | Supply of 80 ASTM medium duty PVC pipe 50mm dia Male Threaded Adapter (Brass) |
| 183 | Supply of 80 ASTM medium duty PVC pipe 15mm dia Female Threaded Adapter (Brass) |
| 184 | Supply of 80 ASTM medium duty PVC pipe 20mm dia Female Threaded Adapter (Brass) |
| 185 | Supply of 80 ASTM medium duty PVC pipe 25mm dia Female Threaded Adapter (Brass) |
| 186 | Supply of 80 ASTM medium duty PVC pipe 50mm dia Female Threaded Adapter (Brass) |
| 187 | Supply of 80 ASTM medium duty PVC pipe 15mm dia nipple |
| 188 | Supply of 80 ASTM medium duty PVC pipe 20mm dia Nipple |
| 189 | Supply of 80 ASTM medium duty PVC pipe 25mm dia Nipple |
| 190 | Supply of 80 ASTM medium duty PVC pipe 50mm dia Nipple |
| 191 | Supply of PVC tank nipple 25mm dia |
| 192 | Supply of Solvent cement for adhesive of PVC pipe |
| 193 | Supply of Taflon tape for PVC pipe (30 ft length roll) |
| 194 | Supply of PVC clip 15mm dia |
| 195 | Supply of PVC clip 20mm dia |
| 196 | Supply of PVC clip 25mm dia |
| 197 | Supply of PVC clip 50mm dia |
| 198 | Supply of Welding Rod (90 nos of rod per packet) |
| 199 | Supply of cutter blade for circular saw |
| 200 | Supply of tensor blades for hand saw |
| 201 | Supply of Alum |
| 202 | Supply of Phenyl |
| 203 | Supply of Toilet Cleaner (Harpic or similar brand) |
| 204 | Supply of Napthaline Ball |
| 205 | Supply of Air freshner 50 g pack |
| 206 | Supply of Detergent Powder 500 g pack |
| 207 | Supply of Jute threads |
| 208 | Supply of Summer seasonal plant saplings |
| 209 | Supply of Rainy seasonal plant saplings |
| 210 | Supply of Winter seasonal plant saplings |
| 211 | Supply of Earthen Pot of 20 cm dia |
| 212 | Supply of Earthen Pot of 30 cm dia |
| 213 | Supply of Cow dung |
| 214 | Supply of DAP |
| 215 | Supply of bone dust |
| 216 | Supply of Musturd Cake |
| 217 | Supply of Claw Hammer |
| 218 | Supply of Measuring Tape (3mt) |
| 219 | Supply of Measuring Tape (5mt) |
| 220 | Supply of 18 inch Heavy duty Hand Saw |
| 221 | Supply of Chisel |
| 222 | Supply of Screw Driver set box |
| 223 | Supply of Nail Gun |
| 224 | Supply of Adjustable Iron Jack Plane (Randa) with Blade Cutting Range 355 mm PLANER |
| 225 | Supply of Brick Trowel or Karni Set of 3 Karni/Kanni (Small, Medium, Large) |
| 226 | Supply of Margin Trowel |
| 227 | Supply of Plumb Bob |
| 228 | Supply of Wooden Float (Wooden Trowel Wood Float for Mason Work for Level Wall plastering) |
| 229 | Supply of Metal Float 4\\" x 9.5\\" Mild Steel Trowel Float |
| 230 | Supply of GI Tasla or Ghamla (Size 450 mm top dia, 300 mm bottom dia & 250 mm depth) TATA or similar brand |
| 231 | Supply of Hammer (2 kg) with wooden handle |
| 232 | Supply of Water level |
| 233 | Supply of GI mortan pan ( 450 mm dia and 150 mm deep) |
| 234 | Supply of Shovel with wooden handle |
| 235 | Supply of Ten teeth garden rack with handle |
| 236 | Supply of Wooden hand cultivator |
| 237 | Supply of Spade with large wooden handle |
| 238 | Supply of Spade with small wooden handle |
| 239 | Supply of hoe with wooden handle |
| 240 | Supply of pick-axe (TATA make) with wooden handle |
| 241 | Supply of Rammer (5 kg) with wooden handle |
| 242 | Supply of Mattock (5 kg) with wooden handle |
| 243 | Supply of Axe (2.5 kg) with wooden handle |
| 244 | Supply of Axe (1.5 kg) with wooden handle |
| 245 | Supply of Bill hook (1 kg) |
| 246 | Supply of Hard broom with long stick |
| 247 | Supply of Hard broom without stick |
| 248 | Supply of Soft broom |
| 249 | Supply of Wiper |
| 250 | Supply of Mopper |
| 251 | Supply of Multipurpose Duster |
| 252 | Supply of Dust pan |
| 253 | Supply of Bucket (10 litre capacity) |
| 254 | Supply of Dust bin (10 litre capacity) |
| 255 | Supply of 100 ft roll of flexible water hose pipe with 16 mm nimonal dia |
| 256 | Supply of Health faucet Model No. ALD-CHR-579 of jaquar or similar standard as per direction of EIC |
| 257 | Supply of C.P. wall flange two way bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore of jaquar made model no- ARI-CHR-39041 or its equivalent as per direction of EIC. |
| 258 | Supply of C.P. 15 mm dia CP pillar cock of approved quality JAQUAR make (Model CON-CHR-011KN) or its equivalent as per direction of EIC. |
| 259 | Supply of C.P. swan neck piller cock of jaquar made kitchen faucet model no-FLR-5357N or its equivalent as per direction of EIC., 15 mm nominal bore |
| 260 | PART-B:- Electrical Works related items |
| 261 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. |
| 262 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 263 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 264 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 265 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.25mm |
| 266 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.5/6 amps switch |
| 267 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.15/16 amps switch |
| 268 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.3 pin 5/6 amp socket outlet |
| 269 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.6 pin 15/16 amp socket outlet |
| 270 | Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 271 | Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings). |
| 272 | Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required. |
| 273 | Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required |
| 274 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. |
| 275 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required |
| 276 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.(Upto 450 mm sweep) |
| 277 | Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess i/c providing and fixing 25 amp modular socket outlet and 25Amps modular SP MCB, “C” curve including connection, painting etc. as required. |
| 278 | Supplying and fixing PVC batten/ angle holder including connection etc. as required |
| 279 | Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required100 A 30 KA FPMCCB |
| 280 | Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required200 A 36 KA FPMCCB |
| 281 | Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required400A 50KA FPMCCB |
| 282 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)6 way, Double door |
| 283 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)12 way, Double door |
| 284 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator4 way (4 + 12), Double door |
| 285 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as requiredSingle pole |
| 286 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as requiredDouble pole |
| 287 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required as per instruction of EIC63A |
| 288 | Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required100A |
| 289 | Supplying, installing, testing and commissioning of following capacity TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with TPN disconnector FSU and HRC fuses, connections, earthing etc. as required.100A TPN |
| 290 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 291 | Supply of new LED tube light set complete of approved make in all respect 20 watt as per instruction of EIC. |
| 292 | Supply and fixing 50W LED street light set complete in all respect as per instruction of EIC |
| 293 | Supply and fixing 100W LED flood light set complete in all respect as per instruction of EIC |
| 294 | Supply and fixing 200 W LED flood light set complete in all respect as per instruction of EIC |
| 295 | Supply of 20W Led Lamp complete in all respect as per instruction of EIC |
| 296 | Supply of 9W Led Lamp(B-22 Cap) complete in all respect as per instruction of EIC |
| 297 | Supply of exhaust fan 4/5 blade 220mm single phase of approved make ISI marked as per instruction of EIC(Make Bajaj, Crompton, Havells etc. or equivalent) |
| 298 | Supply of 20A Power unit complete with 4module plate, starter, plug and socket as per instruction of EIC |
| 299 | Supply of 4sq.mm 2 Core, unarmoured Aluminium cable of approved make as per instruction of EIC |
| 300 | Supply of 6sq.mm 2 Core, unarmoured Aluminium cable of approved make as per instruction of EIC |
| 301 | Supply of 10sq.mm 2 Core, unarmoured Aluminium cable of approved make as per instruction of EIC |
| 302 | Deployment of electrical helper for rectification of electrical faults in three shifts (10 nos of semiskilled manpower on normal days(602)-5418 and 04nos of semiskilled manpower on sundays&holidays(128)days- 384) |
| 303 | Repairing of burnt / faulty submerssible pump motor set 10 HP capacity, 440V, three phase including rewinding, replacement of minor damaged spares of pump motor sets such as bush, bearing, thrust bearing, water seal, diaphgram, sand stainer etc. all complete. |
| 304 | Repairing of burnt / faulty submerssible pump motor set 2-3 HP capacity, 440V, three phase including rewinding, replacement of minor damaged spares of pump motor sets such as bush, bearing, thrust bearing, water seal, diaphgram, sand stainer etc. all complete. |
| 305 | Supply of Fan condensor 2.5 mfd of approved make as per instruction of EIC. |
| 306 | Supply of PVC tape of approved make as per instruction of EIC |
| 307 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface/ recessed steel/ PVC conduit as required1 x 1.5 sq. mm |
| 308 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface/ recessed steel/ PVC conduit as required2 x 4 sq. mm |
| 309 | Supply of 3 pin top 5/6 Amp. ISI marked of approved make as per instruction of EIC. |
| 310 | Supply of 3 pin top 15/16 Amp. ISI marked of approved make as per instruction of EIC |
| 311 | Repairing of burnt / faulty submersible pump motor set 75 HP capacity, 550V, three phase 2900 RPM including rewinding, replacement of damaged spares of pump motor sets such as bush, bearing, thrust bearing, water seal, diaphgram, sand stainer etc. all complete. |
| 312 | Repairing of burnt / faulty submersible pump motor set 85 HP capacity, 550V, three phase 2900 RPM including rewinding, replacement of damaged spares of pump motor sets such as bush, bearing, thrust bearing, water seal, diaphgram, sand stainer etc. all complete. |
| 313 | Supplying of Aluminium IN-Line Connectors 1/2'' as per instruction of EIC |
| 314 | Supplying of Aluminium IN-Line Connectors 1'' as per instruction of EIC |
| 315 | Supplying of Aluminium tube terminals/socket 95/120/150sqmm as per instruction of EIC |
| 316 | Supplying of Aluminium tube terminals/socket 185/225/240sqmm as per instruction of EIC |
| 317 | Supplying of Copper tube terminals/socket 95sqmm as per instruction of EIC |
| 318 | Supplying of Copper tube terminals/socket 50sqmm as per instruction of EIC |
| 319 | Supplying of Copper tube terminals/socket 35sqmm as per instruction of EIC |
| 320 | Supplying of Copper tube terminals/socket 120/150sqmm as per instruction of EIC |
| 321 | Supplying of Casing nails as per instruction of EIC |
| 322 | Supplying of Cable clip/Kaju clip 8mm as per instruction of EIC |
| 323 | Supplying of Cable clip/Kaju clip 10mm as per instruction of EIC |
| 324 | Supplying of Cable clip/Kaju clip 12mm as per instruction of EIC |
| 325 | Supplying of Plastic wall plug/bullet 1/2'' as per instruction of EIC |
| 326 | Supplying of Plastic wall plug/bullet 2'' as per instruction of EIC |
| 327 | Supplying of screw 1/2''as per instruction of EIC |
| 328 | Supplying of screw 1''as per instruction of EIC |
| 329 | Supplying of screw 1 1/2''as per instruction of EIC |
| 330 | Supplying of screw 2''as per instruction of EIC |
| 331 | Supplying of screw 3''as per instruction of EIC |
| 332 | Supplying of PVC Switch board 2'' x 2'' as per instruction of EIC |
| 333 | Supplying of PVC Switch board 3'' x 6'' as per instruction of EIC |
| 334 | Supplying of PVC Switch board 6'' x 4'' as per instruction of EIC |
| 335 | Supplying of PVC Switch board 6'' x 8'' as per instruction of EIC |
| 336 | Supplying of Graphite packing 5/8'' and 1/2''as per instruction of EIC |
| 337 | Supplying of nut bolt 5/8'' and 1/2'' as per instruction of EIC |
| 338 | Supplying of WASHER as per instruction of EIC |
| 339 | Supplying of Grease as per instruction of EIC |
| 340 | Supplying of Rubber Joint as per instruction of EIC |
| 341 | Repairing of ceiling fan / exhaust fan / stand fan/ wall fan of any size with rewinding, replacement of bearing, condensor, bobin bush and shaft machining etc. all complete job |
| 342 | Hiring & running of light Crane as & when required basis including hiring charges, oprator charges , diesel and mobile on per day basis'. |
| 343 | Hiring of diesel truck- 9 Te as & when required basis including hiring charges, oprator charges , diesel and mobile on per day basis. |
| 344 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
