|
| 1 | Supply of handpump set and spare parts |
| 2 | Die Set 12mm with Handle & Bits |
| 3 | Hydraulic vice 32 mm. |
| 4 | Heavy duty clamp 32 mm |
| 5 | Heavy duty clamp 65 mm |
| 6 | Connecting rod vice |
| 7 | Pipe lifter Spanner for 32mm N.B.Pipe. |
| 8 | Pipe wrench 300 mm |
| 9 | Pipe wrench 450 mm |
| 10 | Pipe wrench 600 mm |
| 11 | Pipe wrench 900 mm |
| 12 | Double ended open jaw spanner 17 * 18 in c.v. steel |
| 13 | Hacksaw frame |
| 14 | Pump Bucket (NITRILE) for Deepwell Hand pump(is: 15500 part 7) |
| 15 | Sealing ring for deepwell handpumps (is: 15500 part 7) |
| 16 | Hex nut with bolt M 12 * 40 |
| 17 | Handle axle along with nut & washer for Deepwell Hand pump (is: 15500 part 4) |
| 18 | Single side shielded Bearing confiming to IS: 15500 part 4 suitable for above handpumps |
| 19 | Chain Nut with Bolt M-12X40 (is: 15500 part 4) |
| 20 | Chain with coupling for Deep well Hand pump |
| 21 | Head for Deepwell Hand pump (is: 15500 part 4) |
| 22 | Third plate Suitable for Deepwell Hand pump (is: 15500 part 4) (IM-ll) |
| 23 | Water tank for Deepwell Hand pump (is: 15500 part 4) (IM-ll) |
| 24 | Connecting rod of 12 mm dia. X 3 mtr. Length |
| 25 | I.S.I.marked galvanized steel tubes as per I:S 1239 ( Part-1) /2004 amdt.1 to 4 scrwed at both ends as per I:S 554/1999 ( reaffirmed 2004) . One end socketed with ISI marked socket as per IS:1239 ( Part -II)/1992 ( reaffirmed 2003) and other end protected with plastic thread protector Medium class , Bore size (nominal)Diameter – 32 mm , Length – 3 meter |
| 26 | Cylinder Assembly I.M.II |
| 27 | Cylinder body with brass liner for Deepwell Hand pump (is: 15500 part 5) |
| 28 | Reducer cap for Deepwell Hand pump (is: 15500 part 5) (IM-ll) |
| 29 | Upper valve along with rubber seat for Deepwell Hand pump (is: 15500 part 6) (IM-ll) |
| 30 | Upper valve assly Suitable for Deep well Hand pump (IM-ll) (is: 15500 part 6) (IM-ll) |
| 31 | Lower valve assembly I.M.II |
| 32 | Hacksaw Blade (High speed steel) |
| 33 | Spacer G.M. I.M.II |
| 34 | Rubber seat lower valve (IM-ll) |
| 35 | Rubber seat Upper valve (IM-ll) |
| 36 | Front cover |
| 37 | Handle for Deepwell Hand pump (is: 15500 part 4) |
| 38 | Stand assembly telescopic for Deepwell Hand pump |
| 39 | Ring spanner 17*18 |
| 40 | Crank spanner 17*18 |
| 41 | I.S.I.marked deepwell handpump set (India mark II) confirming to I.S.15500 completes with Head & handle assembly,water tank,telescopic stand assembly,cylinder assembly along with 12 nos. of 12mm x 3 mtr. Length MS electrogalvanised connecting rods made of bright bar and 12 nos.of hot dip galvanised riser pipes 32mm N.B. x 3 mtr. Long fitted with socket (made from seamless pipe or machined bar & galvanised) at one end and thread protector at another end.charges etc complete Please Enable Macros to View BoQ information |
