|
| 1 | Construction of GCI Cover Shed, Concrete Drying Platform-cum-Threshing Floor, FIC-cum-FRS, C.C. Road, Toilet Block and Sinking of Tube Well at Jhariaguda Market Yard of Koksara Block under HI RMC, Mukhiguda Earth work in excavation of foundation trenches in hard soil soil including moorum, stony earth and earth mixed with boulders except sheet rock and boulders required depth and depositing the excavated materials away from the work site with all leads and lifts including shoring shuttering & dewatering (if required) with cost of labour hire & running charges of water pumps sundries & T & P required for the work complete as directed by the Engineer in charge. |
| 2 | Supplying and filling plinth with sand well watered and rammed in layers not exceeding 23 cm in depth with all lead and lift including cost, conveyance, loading, unloading, royalities and taxes of all materials cost of all labour sundries T&P required for the work etc complete in all respect as directed by the engineer in charge. (Measurement will be taken on finished compacted section only.) |
| 3 | Filling foundation trenches and plinth with excavated earth including watering ramming and compacting in layers not exceeding 150mm thick including labour sundries T&P etc complete and as per direction of engineer -in- charge. |
| 4 | Providing and laying PCC (1:3:6) in foundation & plinth using 40mm size crusher broken HG metal of approved quality from approved quarry including hoisting, Lowering and laying concrete to the required level ramming, watering & curing etc complete including cost conveyance of all materials with all taxes and royalties all labour with sundries T&P including hire and running charges of machineries required for the work etc complete in all respect and as per the direction of Engineer-in-charge. |
| 5 | C.C (1:2:4) with 12mm size HG chips of approved quality from approved quarry including hoisting. Lowering and laying concrete to the required level ramming, watering & curing etc complete including cost conveyance of all materials with all taxes and royalties all labour with sundries T&P including hire and running charges of machineries required for the work etc complete in all respect and as per the direction of Engineer-in-charge. |
| 6 | Providing Fly Ash brick masonry work in Foundation & Plinth with fly ash bricks 25cm x12 cm x8 cm tolerance of ± 2% size bricks having crushing strength not less than 75 kg/cm2 with cement mortar 1 cement: 6 sands with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading ,and unloadining, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge. |
| 7 | Providing Fly Ash brick masonry work in Super Structure upto 3 meter height with fly ash bricks 25cm x12 cm x8 cm tolerance of ± 2% size bricks having crushing strength not less than 75 kg/cm2 with cement mortar 1 cement: 6 sands with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading ,and unloadining, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge. |
| 8 | Providing, lifting, hoisting and laying Reinforced Cement Concrete of M-20 grade in Column base, Column Footings, Raft Foundation,Stem of the Columns, beams, chaujja, fin, lintel, stair case, jali , shelves and slab etc as per approved designs and drawings having a minimum compressive strength ( in work test) 20N. / Square mm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using screened & washed sharp river sand for mortar and 10 mm. to 20 mm. size black hard crusher broken granite stone chips of approved quality from approved quarry, washed and cleaned to be mixed in concrete mixture with approved quality of cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days including, centering and shuttering then after dismantling and removing the debrises away from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost etc. complete as per direction of Engineer-in-charge. (A) COLUMN AND BEAM (UPTO 3 MTR.) |
| 9 | (C) PLINTH BAND |
| 10 | (D) COLUMN BASE |
| 11 | (E) LINTEL & WALL BAND (UPTO 3 MTR.) |
| 12 | (G) ROOF SLAB |
| 13 | Cutting,Straightening coiled or bent up M.S plain HYSD/TMT reinforcement bars welding or jointing if necessary bending,binding,tying the grills as required for R.C.C works,providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance,loading, unloading & taxes of M.S plain/HYSD/TMT reinforcement bars and binding wires of 18 to 20 gaugo required for the work and cost of all labour, sundries, T&P and scaffolding complete in all respect as directed by the Engineer in charge (payment will be made according to the actual weight of M.S plain/HYSD/TMT reinforcement bars consumed in the work only.(A) GROUND FLOOR |
| 14 | 25 mm thick A.S. Flooring with Cement Concrete (1:2:4) including punning using 12 mm.size crusher broken granites chips all cost conveyance etc. complete as per direction of Engineer-in-charge. |
| 15 | Providing and laying 20mm thick grading plaster in cement mortar (1:4) on roof slab ith 2mm and down graded size HG chips including all cost, conveyance, royality and taxes with water proof cement compound with curing etc. complete to work site for old work as per specification & direction of Engineer-in-charge. |
| 16 | Providing 6 mm. thick cement plaster in all RCC floors at all height with cement mortar of mix (1:4) with RCC surface finish smooth including closed deep chiping & slury treatment, cement and screened & washed sharp sand for mortar and finished smooth to the rough surface of the brick masonry wall after racking out joints (along with providing grooves wherever necessary) including watering and curing rounding of corner etc. complete with cost, conveyance, loading, unloading, royalties and taxes of all materials, cost all labour, I & P, sundries and scaffolding required for the work etc as directed by the Engineer in charge. |
| 17 | Providing 12 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) with cement and screened & washed sharp sand for mortar and finished smooth to the rough surface of the brick masonry wall after racking out joints (along with providing grooves wherever necessary) including watering and curing rounding of corner etc. complete with cost, conveyance, loading, unloading, royalties and taxes of all materials, cost all labour, T & P, sundries and scaffolding required for the work etc as directed by the Engineer in charge.(A) UPTO 3 METER HEIGHT |
| 18 | Providing 16 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) with cement and screened & washed sharp sand for mortar and finished smooth to the rough surface of the brick masonry wall after racking out joints (along with providing grooves wherever necessary) including watering and curing rounding of corner etc. complete with cost, conveyance, loading, unloading, royalties and taxes of all materials, cost all labour, T & P, sundries and scaffolding required for the work etc as directed by the Engineer in charge.(A) UPTO 3 METER HEIGHT |
| 19 | Supplying fitting and fixing of precoated Galvanized iron profile sheet semi gloss of 1000mm width and total coated thickness 0.45mm in roof drilling hole in wind ties including fixing of ridges valleys, wind ties including fixing of ridges valleys,wind ties etc. complete including cost of sheet and all fitting,all taxes labour,T&P etc.complete as per direction of Engineer-in-charge. |
| 20 | Supplying, fabricating, fitting, fixing & erection of M.S Anglur/Tubular truss including all cost, convenyance, taxes etc. complete as per direction of Engineer-in-charge. |
| 21 | Supplying, fabricating, fitting, fixing & erection of purlins including all cost, convenyance, taxes etc. complete as per direction of Engineer-in-charge. |
| 22 | Distempering two coats to walls with one coat of primer of approved shade on new work to give an even shade including cost of distemper of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.Note :- Sample of Paint shall be approved before procurement and use. |
| 23 | Distempering two coats to walls with one coat of primer of approved shade (weather coat) on new work to give an even shade including cost of distemper of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.Note :- Sample of Paint & Primer shall be approved before procurement and use.(A) UPTO 3 METER HEIGHT |
| 24 | Painting two coats with approved synthetic enamel paints of Asian / Berger/Dulox make and of approved colour, shade to new Iron work over a coat of red-oxide primer of Asian / Berger make including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.Note :- Sample of Paint & Primer shall be approved before procurement and use. |
| 25 | Supplying, fitting and fixing of vitrified tile in floors of size 600mm x 600mm, 16 mm.to 25 mm thick of approved make with application of polymere modified cement based water resistant adhesive bed of required thickness of 10 mm and filling joints with epoxy grout of approved quality including cost of all materials,takes labour T &P etc required for the work etc. complete as per direction of Engineer-in-charge. |
| 26 | Supplying, fitting and fixing of glazed floor tiles of size 30cm x 30cm in floors, treads on steps an landing on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) joined with neat cement slurry mixed with pigment to match the shade of the tiles approved quality including rubbing, polishing, cost of all materials, taxes, labour, conveyance, T &P etc required for the work site etc. complete as per direction of Engineer-in-charge. |
| 27 | Inserting bituminous expansion joints Board 12 mm. thick of depth 0.075 m. including cleaning, all cost, conveyance, labour, taxes etc. complete as per direction of Engineer-in-charge. |
| 28 | Cost, supplying ,fitting & fixing of bathroom fibre door of approved make including fibre choukatha all GI fittings all cost, conveyance, taxes etc. complete as per direction of Engineer-in-charge. |
| 29 | Cost, supplying ,fitting & fixing of bathroom fibre door of approved make including fibre choukatha all GI fittings all cost, conveyance, taxes etc. complete as per direction of Engineer-in-charge. |
| 30 | Cost, supplying, fitting & fixing of pre-cast concrete ventilators of size 0.38 m x 0.25 m. etc. complete as per direction of Engineer-in-charge. |
| 31 | Supplying, fitting, fixing of M.S Iron frame welded composite with M.S angle with flat lovad type out side iron frame welded with wire netting or mesh including serew nail & cost of materials including all cost, convenyance, royalties etc. complete as per direction of Engineer-in-charge. |
| 32 | Supplying fitting and fixing of holding down bolts (600mm X 200mm) & base plate of 8mm thickness including all cost, convenyance, taxes etc. complete as per direction of Engineer-in-charge. (market rate) |
| 33 | Providing, Fitting & Fixing of PH & sanitary fittings including all cost of materials, labour, T&P, conveyance etc. complete as per specification & direction of the Engineer-in-charge. |
| 34 | Providing, Fitting & Fixing of internal electrification including all cost of materials, labour, T&P, conveyance etc. complete as per specification & direction of the Engineer-in-charge. |
| 35 | Cost, Supplying, fitting and fixing of Indian squatting pan and ladies /gents urinal pan including cost of pan of approved brand, materials, labour, T&P etc. complete as per direction of Engineer-in-charge. |
| 36 | Cost, Supplying, fitting & Fixing of 1000 litre capacity Sintex water tank including all cost of fitting materials, labour, T&P etc. complete as per direction of Engineer-in-charge. |
| 37 | Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs (650cfm/200psi)as required to suit the site condition with the use of own rigs with its accessories, tools and plant, and consumables etc., for lowering of dia P.V.C./ G.I. pipes for housing, fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I./ P.V.C. casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tudewell).(A) Drilling of 125 mm dia bore ( 0 mtr to 30 mtr.) |
| 38 | (B) Drilling of 100 mm dia bore ( 31 mtr to 60 mtr.) |
| 39 | (B) Drilling of 100 mm dia bore ( 61 mtr to 75 mtr.) |
| 40 | Lowering the following size GI/PVC pipes with or without slotted pipes as per the necessity from ground level upto 30 mtrs depth or more and fitted and fixed up in perfectly vertical position, including cutting and threading pipe and slotted pipe and supplying and fixing all jointing materials, tools and plant etc., complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above.(A) Lowering of 125dia – 0 mtr. To 30 mtr. |
| 41 | Cleaning and developing the tubewell using their own compressor continuously worked till clear and adequate discharge is obtained from the tubewell including supply and use of all necessary equipment and labours per the direction of Engineer-in-charge. |
| 42 | Supplying all labour, tools and plant and fitting and fixing India Mark-II Deep well hand pump with cast Iron Cylinder,12 mm/16mm dia Bright steel connecting rod,32 mm dia G.I pipe of required lengths with supply of extra sockets of approved make,all complete temporarily as per the direction of Engineer- In-Charge. |
| 43 | Construction of cement concrete platform supply of all labour and materials such as sand, cement, chips T&P etc.all complete as approved design and as per direction of Engineer- In-Charge. |
| 44 | Supplying of all materials, labour, tools and plant and withdrawing casing pipe from the unsuccessful bore.etc complete.(A) With drawing of 125mm dia PVC/GI casing pipe. |
| 45 | Supplying all materials and labour,tools and plants and providing sanitary sealing by cement grouting of grannular space around GI/PVC/MS housing pipe uoto 5mtrs below ground level to plug the bore hole excluding cost of cement all complete as per as per the direction of Engineer- In-Charge.Minimum one mtr,of casing pipe to be inserted in the bore in to the rock at the bottom to ensure sanitary sealing. |
| 46 | Supplying all materials labour T&P for fitting & joining of the following PVC pipe of schedule-80 confirming to ASIM-D-1785 to use as caseing pipe with fitting, cutting, threading to pipe as per the direction of the Engineer – in – charge , cost , conveyance of all materials labours, all taxes etc all complete as per specification and direction of Engineer-in-charge. (A) 125 mm dia PVC caseing pipe of schedule -80 |
| 47 | Provision for geological sounding survey to acess ground water status before excavation of bore well by a authorised geologist transportation of geologist with apparatus to conduct geophysical sounding survey including survey including site clearance for approach the vehicle as per direction of Engineer-in-charge. |
| 48 | Cost of ISI marked Indian Mark-II Hand Pump set with 32mm GI riser pipe 24 mtrs and B.S connecting rod-8Nos (L S.) as per specification and direction of Engineer-in-charge. |
| 49 | Cost, Supplying, Fitting and lowering of 1.50/1.00 H.P submersible pump set with cable,clamp and all fitting materials etc complete of approved brand as per specification and direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
