Tender For Under The Electricity Secondary Works Division, Gorakhpur Under The Construction Of 1X5 Mva 33/11 Kv New Power Substation In Khempipara And The Related 02 Nos. Construction Of 11 Kv Line From The 33/11 Kv Substation In Khempipara Distt. Ma, Maharajganj-Uttar Pradesh

TDR : 55714638

Tender Notice
BOQ

Expired

Maharajganj , Uttar Pradesh

Tender Brief : Tender For Under The Electricity Secondary Works Division, Gorakhpur Under The Construction Of 1X5 Mva 33/11 Kv New Power Substation In Khempipara And The Related 02 Nos. Construction Of 11 Kv Line From The 33/11 Kv Substation In Khempipara Distt. Ma

Document Fees
₹ 3540 /-

EMD
₹ 53000.0 /-

Tender Value
Refer document

Submission Date
10-06-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Part A (Materials Provided by contractor) Sub-Station
2	33 KV Ploymer Pin insulators
3	PG Clamp Dog to Dog Conductor
4	PG Clamp Panther to Dog Conductor
5	Cable Jointing Kit 3×300 mm outdoor
6	Cable Jointing Kit 3×300 mm indoor
7	Cable Jointing Kit 3×185 mm outdoor
8	Cable Jointing Kit 3×185 mm indoor
9	MS Dropper Channel
10	G I Pipe 6'' Dia
11	11 KV Disc Insulator B&S Polymeric Type
12	11 KV Disc Fitting
13	PG Clamp weasel to weasel
14	Number Plate with clamp and Nut & Bolt
15	Danger Board with clamp and Nut & Bolt
16	Barbered Wire
17	Nut Bolt and washer all sizes
18	Stay set complete
19	Earthing of Pole by M S Earthing Rod 20 x 2500 mm and 6 SWG earthing wire etc
20	Holding Clamp for GI Pipe
21	Holding Clamp for cable
22	Holding Clamp for Top, Droper
23	Lug for ACSR Dog Conductor
24	L.T.P.V.C. Cable 3½×70 mm2
25	Terminal Gantry
26	Bus Bar complete with structure and required all materials(acsr panther conductor,insulator and pg clamps etc)
27	Cable Stand with MS Channel
28	L Type Structure for Neutral Stand
29	24 Volt Battery & Battery Charger/Inverter with cabinet
30	Armoured Cu. Control Cable 2×2.5 mm2
31	Armoured Cu. Control Cable 4×2.5 mm2
32	11 KV T.P. M.O. Switch with fixing clamps
33	11 KV Fuse set with fixing clamps.
34	T&P of Substation switchgears(Hand Gloves-05 Set,Safety Helmets-5 Set, Safety Belts-4 Set, Tool Kit Box-1No,Pliers-05 Nos, Meggar-1 No, Multimeter-1 No,earth chain,Ladder,Discharge Rod up to 33 kv-3 No.)
35	Rubber Mat
36	Fire Fighting equipments including 02 no 10 kg,02 Nos. 4.5 Kg. CO2 Fire Extinguisher potable type and 02 Nos. machenical Foam type Fire Extinguisher potable type
37	Fire Bucket with sand and stand
38	Substation Furniture (4–fiber Chairs,2-wooden chair,1- revolving chair, 2–Table with drawer, 2–Bench, 1–Chauki, 2–Stool)
39	Sundry items
40	Part -B – WORKShifting, Loading Carriage & Unloading of following materials from store centre Maharajganj to work site
41	ACSR Dog Conductor
42	11 KV XLPE Cable3×300 mm2
43	11 KV XLPE Cable3×185 mm2
44	ST Pole 11 M long
45	PCC Pole 8.5 M Long
46	33 KV line Isolator
47	Structure for line Isolator
48	33 KV Bus Isolator
49	Structure for Bus Isolator
50	33 KV post insulators
51	Structure for Post Insulator
52	33 KV C.T
53	C.T Structure
54	33 KV PT(Outdoor)
55	PT Structure
56	33 KV Fuse Set
57	Fuse Set Structure
58	33 KV Lightning Arrestors
59	LA Structure
60	33 KV VCB 800A, 750 MVA with Structure
61	33 KV Control Panel for Single T/F
62	33KV Control Pannel for single feeder
63	5 MVA Transformer 33/11 KV
64	90 Lbs. Rail pieces for T/F Wt. 44.6 Kg/Mtr.
65	11 KV VCB (Incoming) 600/300/5A 350 MVA
66	11 KV VCB (Out going) 200/100/5A 350 MVA
67	63 KVA 11/0.4 KV Transformer
68	11 KV Top Channel
69	Erection, grouting,painting of following fabricated structures as per RESSPO Drawing.
70	33 KV Bus bar Gantry
71	33 KV Terminal Gantry
72	33 KV Isolator structure
73	33 KV L.A. structure
74	33 KV Post insulator structure
75	33 KV fuse set structure
76	33 KV C.T. structure
77	33KV P.T. structure
78	33 KV VCB Structure
79	Insttalation, mounting and fitting of equipment on erected structures as per RESSPO Drawing.
80	33 KV Line isolator complete
81	33 KV Bus isolator complete
82	33 KV L.A.
83	33 KV Post insulator complete
84	33 KV fuse set
85	33KV C.T.
86	33KV P.T.
87	33 KV VCB
88	Construction of power transformer plinth for 05 MVA transformer of size 3.5 x 3.5 x 0.5 mtr or as per site requirement. including cost of all material as per requirement.
89	Transformer body earthing complete including cost of G.I. strip, G.I. pipe 1.5” dia 40’ long and other earthing materials. (delta type)
90	Neutral earthing of 5 MVA transformer complete including cost of G.I. strip, G.I. pipe 1.5” dia 40’ long and other earthing materials. (delta type)
91	Indoor Equipment earthing (11 kv pannels) including cost of G.I. strip, G.I. pipe 1.5” dia 40’ long and other earthing materials. (delta type) both delta earthing will be connected with 32mm round bar
92	Separate earthing of Indoor Equipment (33 kv control pannel) including cost of G.I. strip, G.I. pipe 1.5” dia 40’ long and other earthing materials. (delta type)
93	Special earthing of LA including cost of G.I. strip, G.I. pipe 1.5” dia 40’ long and other earthing materials. (delta type)
94	Providing and Making of Outdor Earthing (Eartmat) as per UPPCL Norms.
95	Laying of 11 KV “XLPE” cable 3 x 185/300 mm2 including digging of pits of size 0.5 x 0.5 mtr. covering of cable with sand and 1st class bricks around and top of the cable or laying in cable trench and covering with brick and sand as per site requirement.
96	Rising of cable on DP with GI Pipe 6\\" dia 3mtr long for cable safety.
97	Providing and erection of Special pipe earthing for cable protection.
98	Stringing of Terminal gantry and Making all Jumpers with provided all required material.complete work.
99	Stringing of 33 KV Bus Bar and Making all Jumpers in Switchyard with provided all required material .complete work
100	Providing & grouting of Neutral stand with all required materials.
101	Providing & Grouting of cable stand and fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of jumpers.
102	Writing name on S/S Building 11 KV Switchgear panels & all equipments insatalled in control room & switchyard.
103	Jointing charges of 11 KV “XLPE” C/J kit 3 x185/300 mm2 indoor/outdoor.
104	Installation and connection of 63 KVA T/F with all accessories
105	Fitting & Fixing of TPMO and Fuse set on erected 11 KV D/P.
106	Making of control cable trench with cover and hanger by providing all required materials. as per site requirement.
107	Laying from switchyard to control room for 33 KV panel, CT, VCB, 5 MVA t/F by digging trench and making connection complete. (As per site requirement laying of cable though cable trench if available with covering brick and sand.
108	2 x 2.5 mm2
109	4 x 2.5 mm2
110	Providing and writing of Sub-Station Name & Arrow shine Board Complete.
111	Shifting of 11 KV switchgear to control room and placing in control room with grouting of bolts and mounting of switchgear panels properly.
112	Electrical connection of 11 KV switchgear panel and fitting of Bus Bar.
113	Construction of SSO's approached road 1.5 Mtr. wide in Switchyard by laying dry sand and interlocking bricks The work include proper plastering top & side of road and leveling & dressing of earth beneath the brick work on edge.
114	Laying of LT cable 3.5x70 sqmm
115	Outdoor switch yard & approch road colony lighting with Provide 06 no. street light pole,150 watt LED light and all required materials
116	Installation of 33 KV control panel for “VCB” with complete earthing and connection of battery and battery charger/inverter in control room and making all protection equipment connection.
117	Installation & Concreting of Stay set complete
118	Filling of sand in cable trench in the Switch Gear Room.
119	Installation of 24 V Battery & Battery Charge/ Inverter with cabinet
120	Erection, grouting, muffing and painting of 2 Nos. ST Poles 11m long for making DP Structure including fabrication & fixing of M.S. Channel, M.S. Angle, TPMO, Fuse Set, disc Insulators etc. The work includes supply and fixing of necessary clamps with nuts, bolts and washers. The work also includes grouting of Double pole support in C.C. 1:4:8 (cement, sand & brick ballast) in block of size (0.45m x 0.45 x 1/6 length of the pole) including earthing of Double pole with M.S. earthing rod complete in all respect.
121	Erection, grouting of 2 Nos. PCC Poles 8.5 m long for making DP Structure including fabrication & fixing of M.S. Channel, M.S. Angle, TPMO, Fuse Set, disc Insulators etc. The work includes supply and fixing of necessary clamps with nuts, bolts and washers. The work also includes grouting of Double pole support in C.C. 1:4:8 (cement, sand & brick ballast) in block of size (0.45m x 0.45 x 1/6 length of the pole) including earthing of Double pole with M.S. earthing rod complete in all respect.
122	Providing of Misc. Items i.e. all type register ,Single Line Diagram ,Shut Down/Breakdown Name Board, Writing name on Substation Building,name of feedar & switchgear
123	Testing & commissioning charges of Substation.
124	Part A (Materials Provided by contractor) 02 No. 11 KV Line
125	F-bracket for 11 KV
126	Holding Clamp for Top Channel & Ms channel/Dropper
127	Clamp for 11 KV \\"V\\" type Cross arm with bolts and nuts
128	Number Plate with clamp and Nut & Bolt
129	Danger Plate with clamp and Nut & Bolt
130	G I Barbed Wire
131	Nut Bolt and washer all sizes
132	PG Clamp
133	Bracing Angle Iron with holding clamp
134	11 KV E Bracket
135	11 KV T-off Channel
136	T-off Channel holding clamp with Bolts and Nuts
137	MS Guarding Angle
138	GI Wire 6 SWG
139	Gi Wire 8 SWG
140	Stay Rod
141	Stay wire 7/8 swg
142	Stay Clamp
143	Al. Paint
144	Red Oxide Paint
145	Polymeric 11KV Pin Insulator
146	Disc Fitting for T&C 45 KN
147	Disc Insulator T&C 45 KN
148	Earthing of Pole by M S Earthing Rod 20 x 2500 mm and 6 SWG earthing wire etc
149	11KV Cable 3x185sq.mm J/kit
150	Ms Channel/Dropper
151	GI Pipe 6” Dia
152	Holding clamp for GI Pipe and Cable
153	PART - B- WORKShifting, Loading Carriage & Unloading of following materials from store centre Maharajganj to work site
154	8.5 Mtr PCC Pole
155	11 Mtr STP SP55 Pole
156	ACSR Weasel Conductor
157	11 KV 3x185 XLPE Cable
158	Erection of Single pole structure on 8.5 Mtr PCC Pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories for Single circuit ( 'V' type cross arm 100 x 50 x 6 mm, M.S. Channel (7.9 Kg./M) clamps with bolt and nut, composite polymer pin, insulator, danger board with clamp, barbed wire earthing, etc. complete).
159	Erection of Double pole structure on 8.5 Mtr PCC Pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories ((M.S. angle iron bracing with clamps, 100x50mmX2240 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete)) .
160	Erection of Single pole structure on 11mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories for double circuit ( 'V' type cross arm 100 x 50 x 6 mm, M.S. Channel clamps with bolt and nut, composite polymer pin, insulator, danger board with clamp, Alluminium paint, red oxide paint, barbed wire earthing, etc. complete).
161	Erection of Double pole structure on 11Mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron bracing with clamps, top channel with clamps, danger board with clamp, barbed wire earthing, etc. complete).
162	Erection of End double pole structure for cable riser on 8.5 mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles , grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories (M.S. angle iron bracing with clamps, 100x50mmX2240 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete) .
163	Grouting of stay rods (16 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.
164	Guarding between two poles like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, cutting, fabrication and fixing of guarding channel with clamps nut & bolts etc. as per drawing.
165	Laying, spreading, lifting and final sagging of 3 phases of ACSR Weasel conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.
166	Digging & laying of 11 KV Cable (Double ckt) in trench with sand & brick and back filling
167	Laying of 11 KV Cable in Air & Looping work Complete
168	Making of J/kit
169	Special pipe earthing
170	Making of Sectional T-off Pole with all fitting complete work.
171	Chopping of branches of trees of eucalyptus, Neem, Keekar and other kind of trees along the route of the line and disposal of the same at suitable place. (Including existing line) Please Enable Macros to View BoQ information

Also Visit

Tenders

Uttar Pradesh Tenders

Power Generation and Transmission Tenders

Sub Station Work Tenders

Substation Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Under The Electricity Secondary Works Division, Gorakhpur Under The Construction Of 1X5 Mva 33/11 Kv New Power Substation In Khempipara And The Related 02 Nos. Construction Of 11 Kv Line From The 33/11 Kv Substation In Khempipara Distt. Ma, Maharajganj-Uttar Pradesh

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Sl. No.	Item Description
1	Part A (Materials Provided by contractor) Sub-Station
2	33 KV Ploymer Pin insulators
3	PG Clamp Dog to Dog Conductor
4	PG Clamp Panther to Dog Conductor
5	Cable Jointing Kit 3×300 mm outdoor
6	Cable Jointing Kit 3×300 mm indoor
7	Cable Jointing Kit 3×185 mm outdoor
8	Cable Jointing Kit 3×185 mm indoor
9	MS Dropper Channel
10	G I Pipe 6'' Dia
11	11 KV Disc Insulator B&S Polymeric Type
12	11 KV Disc Fitting
13	PG Clamp weasel to weasel
14	Number Plate with clamp and Nut & Bolt
15	Danger Board with clamp and Nut & Bolt
16	Barbered Wire
17	Nut Bolt and washer all sizes
18	Stay set complete
19	Earthing of Pole by M S Earthing Rod 20 x 2500 mm and 6 SWG earthing wire etc
20	Holding Clamp for GI Pipe
21	Holding Clamp for cable
22	Holding Clamp for Top, Droper
23	Lug for ACSR Dog Conductor
24	L.T.P.V.C. Cable 3½×70 mm2
25	Terminal Gantry
26	Bus Bar complete with structure and required all materials(acsr panther conductor,insulator and pg clamps etc)
27	Cable Stand with MS Channel
28	L Type Structure for Neutral Stand
29	24 Volt Battery & Battery Charger/Inverter with cabinet
30	Armoured Cu. Control Cable 2×2.5 mm2
31	Armoured Cu. Control Cable 4×2.5 mm2
32	11 KV T.P. M.O. Switch with fixing clamps
33	11 KV Fuse set with fixing clamps.
34	T&P of Substation switchgears(Hand Gloves-05 Set,Safety Helmets-5 Set, Safety Belts-4 Set, Tool Kit Box-1No,Pliers-05 Nos, Meggar-1 No, Multimeter-1 No,earth chain,Ladder,Discharge Rod up to 33 kv-3 No.)
35	Rubber Mat
36	Fire Fighting equipments including 02 no 10 kg,02 Nos. 4.5 Kg. CO2 Fire Extinguisher potable type and 02 Nos. machenical Foam type Fire Extinguisher potable type
37	Fire Bucket with sand and stand
38	Substation Furniture (4–fiber Chairs,2-wooden chair,1- revolving chair, 2–Table with drawer, 2–Bench, 1–Chauki, 2–Stool)
39	Sundry items
40	Part -B – WORKShifting, Loading Carriage & Unloading of following materials from store centre Maharajganj to work site
41	ACSR Dog Conductor
42	11 KV XLPE Cable3×300 mm2
43	11 KV XLPE Cable3×185 mm2
44	ST Pole 11 M long
45	PCC Pole 8.5 M Long
46	33 KV line Isolator
47	Structure for line Isolator
48	33 KV Bus Isolator
49	Structure for Bus Isolator
50	33 KV post insulators
51	Structure for Post Insulator
52	33 KV C.T
53	C.T Structure
54	33 KV PT(Outdoor)
55	PT Structure
56	33 KV Fuse Set
57	Fuse Set Structure
58	33 KV Lightning Arrestors
59	LA Structure
60	33 KV VCB 800A, 750 MVA with Structure
61	33 KV Control Panel for Single T/F
62	33KV Control Pannel for single feeder
63	5 MVA Transformer 33/11 KV
64	90 Lbs. Rail pieces for T/F Wt. 44.6 Kg/Mtr.
65	11 KV VCB (Incoming) 600/300/5A 350 MVA
66	11 KV VCB (Out going) 200/100/5A 350 MVA
67	63 KVA 11/0.4 KV Transformer
68	11 KV Top Channel
69	Erection, grouting,painting of following fabricated structures as per RESSPO Drawing.
70	33 KV Bus bar Gantry
71	33 KV Terminal Gantry
72	33 KV Isolator structure
73	33 KV L.A. structure
74	33 KV Post insulator structure
75	33 KV fuse set structure
76	33 KV C.T. structure
77	33KV P.T. structure
78	33 KV VCB Structure
79	Insttalation, mounting and fitting of equipment on erected structures as per RESSPO Drawing.
80	33 KV Line isolator complete
81	33 KV Bus isolator complete
82	33 KV L.A.
83	33 KV Post insulator complete
84	33 KV fuse set
85	33KV C.T.
86	33KV P.T.
87	33 KV VCB
88	Construction of power transformer plinth for 05 MVA transformer of size 3.5 x 3.5 x 0.5 mtr or as per site requirement. including cost of all material as per requirement.
89	Transformer body earthing complete including cost of G.I. strip, G.I. pipe 1.5” dia 40’ long and other earthing materials. (delta type)
90	Neutral earthing of 5 MVA transformer complete including cost of G.I. strip, G.I. pipe 1.5” dia 40’ long and other earthing materials. (delta type)
91	Indoor Equipment earthing (11 kv pannels) including cost of G.I. strip, G.I. pipe 1.5” dia 40’ long and other earthing materials. (delta type) both delta earthing will be connected with 32mm round bar
92	Separate earthing of Indoor Equipment (33 kv control pannel) including cost of G.I. strip, G.I. pipe 1.5” dia 40’ long and other earthing materials. (delta type)
93	Special earthing of LA including cost of G.I. strip, G.I. pipe 1.5” dia 40’ long and other earthing materials. (delta type)
94	Providing and Making of Outdor Earthing (Eartmat) as per UPPCL Norms.
95	Laying of 11 KV “XLPE” cable 3 x 185/300 mm2 including digging of pits of size 0.5 x 0.5 mtr. covering of cable with sand and 1st class bricks around and top of the cable or laying in cable trench and covering with brick and sand as per site requirement.
96	Rising of cable on DP with GI Pipe 6\\" dia 3mtr long for cable safety.
97	Providing and erection of Special pipe earthing for cable protection.
98	Stringing of Terminal gantry and Making all Jumpers with provided all required material.complete work.
99	Stringing of 33 KV Bus Bar and Making all Jumpers in Switchyard with provided all required material .complete work
100	Providing & grouting of Neutral stand with all required materials.
101	Providing & Grouting of cable stand and fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of jumpers.
102	Writing name on S/S Building 11 KV Switchgear panels & all equipments insatalled in control room & switchyard.
103	Jointing charges of 11 KV “XLPE” C/J kit 3 x185/300 mm2 indoor/outdoor.
104	Installation and connection of 63 KVA T/F with all accessories
105	Fitting & Fixing of TPMO and Fuse set on erected 11 KV D/P.
106	Making of control cable trench with cover and hanger by providing all required materials. as per site requirement.
107	Laying from switchyard to control room for 33 KV panel, CT, VCB, 5 MVA t/F by digging trench and making connection complete. (As per site requirement laying of cable though cable trench if available with covering brick and sand.
108	2 x 2.5 mm2
109	4 x 2.5 mm2
110	Providing and writing of Sub-Station Name & Arrow shine Board Complete.
111	Shifting of 11 KV switchgear to control room and placing in control room with grouting of bolts and mounting of switchgear panels properly.
112	Electrical connection of 11 KV switchgear panel and fitting of Bus Bar.
113	Construction of SSO's approached road 1.5 Mtr. wide in Switchyard by laying dry sand and interlocking bricks The work include proper plastering top & side of road and leveling & dressing of earth beneath the brick work on edge.
114	Laying of LT cable 3.5x70 sqmm
115	Outdoor switch yard & approch road colony lighting with Provide 06 no. street light pole,150 watt LED light and all required materials
116	Installation of 33 KV control panel for “VCB” with complete earthing and connection of battery and battery charger/inverter in control room and making all protection equipment connection.
117	Installation & Concreting of Stay set complete
118	Filling of sand in cable trench in the Switch Gear Room.
119	Installation of 24 V Battery & Battery Charge/ Inverter with cabinet
120	Erection, grouting, muffing and painting of 2 Nos. ST Poles 11m long for making DP Structure including fabrication & fixing of M.S. Channel, M.S. Angle, TPMO, Fuse Set, disc Insulators etc. The work includes supply and fixing of necessary clamps with nuts, bolts and washers. The work also includes grouting of Double pole support in C.C. 1:4:8 (cement, sand & brick ballast) in block of size (0.45m x 0.45 x 1/6 length of the pole) including earthing of Double pole with M.S. earthing rod complete in all respect.
121	Erection, grouting of 2 Nos. PCC Poles 8.5 m long for making DP Structure including fabrication & fixing of M.S. Channel, M.S. Angle, TPMO, Fuse Set, disc Insulators etc. The work includes supply and fixing of necessary clamps with nuts, bolts and washers. The work also includes grouting of Double pole support in C.C. 1:4:8 (cement, sand & brick ballast) in block of size (0.45m x 0.45 x 1/6 length of the pole) including earthing of Double pole with M.S. earthing rod complete in all respect.
122	Providing of Misc. Items i.e. all type register ,Single Line Diagram ,Shut Down/Breakdown Name Board, Writing name on Substation Building,name of feedar & switchgear
123	Testing & commissioning charges of Substation.
124	Part A (Materials Provided by contractor) 02 No. 11 KV Line
125	F-bracket for 11 KV
126	Holding Clamp for Top Channel & Ms channel/Dropper
127	Clamp for 11 KV \\"V\\" type Cross arm with bolts and nuts
128	Number Plate with clamp and Nut & Bolt
129	Danger Plate with clamp and Nut & Bolt
130	G I Barbed Wire
131	Nut Bolt and washer all sizes
132	PG Clamp
133	Bracing Angle Iron with holding clamp
134	11 KV E Bracket
135	11 KV T-off Channel
136	T-off Channel holding clamp with Bolts and Nuts
137	MS Guarding Angle
138	GI Wire 6 SWG
139	Gi Wire 8 SWG
140	Stay Rod
141	Stay wire 7/8 swg
142	Stay Clamp
143	Al. Paint
144	Red Oxide Paint
145	Polymeric 11KV Pin Insulator
146	Disc Fitting for T&C 45 KN
147	Disc Insulator T&C 45 KN
148	Earthing of Pole by M S Earthing Rod 20 x 2500 mm and 6 SWG earthing wire etc
149	11KV Cable 3x185sq.mm J/kit
150	Ms Channel/Dropper
151	GI Pipe 6” Dia
152	Holding clamp for GI Pipe and Cable
153	PART - B- WORKShifting, Loading Carriage & Unloading of following materials from store centre Maharajganj to work site
154	8.5 Mtr PCC Pole
155	11 Mtr STP SP55 Pole
156	ACSR Weasel Conductor
157	11 KV 3x185 XLPE Cable
158	Erection of Single pole structure on 8.5 Mtr PCC Pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories for Single circuit ( 'V' type cross arm 100 x 50 x 6 mm, M.S. Channel (7.9 Kg./M) clamps with bolt and nut, composite polymer pin, insulator, danger board with clamp, barbed wire earthing, etc. complete).
159	Erection of Double pole structure on 8.5 Mtr PCC Pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories ((M.S. angle iron bracing with clamps, 100x50mmX2240 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete)) .
160	Erection of Single pole structure on 11mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories for double circuit ( 'V' type cross arm 100 x 50 x 6 mm, M.S. Channel clamps with bolt and nut, composite polymer pin, insulator, danger board with clamp, Alluminium paint, red oxide paint, barbed wire earthing, etc. complete).
161	Erection of Double pole structure on 11Mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron bracing with clamps, top channel with clamps, danger board with clamp, barbed wire earthing, etc. complete).
162	Erection of End double pole structure for cable riser on 8.5 mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles , grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories (M.S. angle iron bracing with clamps, 100x50mmX2240 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete) .
163	Grouting of stay rods (16 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.
164	Guarding between two poles like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, cutting, fabrication and fixing of guarding channel with clamps nut & bolts etc. as per drawing.
165	Laying, spreading, lifting and final sagging of 3 phases of ACSR Weasel conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.
166	Digging & laying of 11 KV Cable (Double ckt) in trench with sand & brick and back filling
167	Laying of 11 KV Cable in Air & Looping work Complete
168	Making of J/kit
169	Special pipe earthing
170	Making of Sectional T-off Pole with all fitting complete work.
171	Chopping of branches of trees of eucalyptus, Neem, Keekar and other kind of trees along the route of the line and disposal of the same at suitable place. (Including existing line) Please Enable Macros to View BoQ information

Tender For Under The Electricity Secondary Works Division, Gorakhpur Under The Construction Of 1X5 Mva 33/11 Kv New Power Substation In Khempipara And The Related 02 Nos. Construction Of 11 Kv Line From The 33/11 Kv Substation In Khempipara Distt. Ma, Maharajganj-Uttar Pradesh

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us