Tender For Under The Electricity Secondary Works Division, Gorakhpur For The Increasing Capacity (1X5 Mva To 2X5 Mva) Of 33/11 K.V. Sub-Station Dhanewa Dhanei And Construction Of 02 No. 11 Kv Line From 33/11 Kv S/S Dhanewa Dhanei, Increasing Capacity, Maharajganj-Uttar Pradesh

TDR : 55714630

Tender Notice
BOQ

12 Days Left

Maharajganj , Uttar Pradesh

Tender Brief : Tender For Under The Electricity Secondary Works Division, Gorakhpur For The Increasing Capacity (1X5 Mva To 2X5 Mva) Of 33/11 K.V. Sub-Station Dhanewa Dhanei And Construction Of 02 No. 11 Kv Line From 33/11 Kv S/S Dhanewa Dhanei, Increasing Capacity

Document Fees
₹ 3540 /-

EMD
₹ 73000.0 /-

Tender Value
Refer document

Submission Date
10-06-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Work-01 (Dhanewa Dhanei Increasing Capacity 1x5 MVA to 2x5 MVA)PART - A- MATERIAL PROVIDED BY CONTRACTOR
2	11 KV cable jointing kit 3×300 mm outdoor
3	11 KV cable jointing kit 3×300mm indoor
4	11 KV cable jointing kit 3×185 mm outdoor
5	11 KV cable jointing kit 3×185 mm Indoor
6	Top Channel 100x50x6 mm, 2400 mm long
7	Holding Clamp
8	Complete Stay Set
9	Disc Fitting for T&C 45 KN
10	Disc Insulator T&C 45 KN
11	Polymeric 11KV Pin Insulator
12	PG Clamp
13	Number Plate with clamp and Nut & Bolt
14	Danger Plate with clamp and Nut & Bolt
15	MS Dropper Angle
16	M S Earthing Rod 20 x 2500 mm
17	Barbered Wire
18	11 KV E Bracket
19	Armoured Copper Control Cable 2×2.5 mm2
20	Armoured Copper Control Cable 4×2.5 mm2
21	24 volt battery and battery charger with cabinet
22	GI pipe 6\\" dia over the 3x300/185 sqmm XLPE cable
23	Holding Clamp for 11 KV Cable
24	Holding Clamp For GI pipe / Cable(3x185sqmm) & Dropper Channel
25	M.S. Nut & Bolt Various size with washer
26	Structure For cable support
27	\\"L\\" Type Structure for Neutral
28	P.G Clamp For Dog
29	Rubber Mat
30	PART - B WORKShifting & loading of following materials on private truck at store centre Maharajganj & carriage up to 33/11 KV Sub-Station Dhanewa Dhanei, Distt- Maharajganj & Un-loading of the same with proper stacking (Distance about 0 to12 km)
31	S T Pole 11 Mtr Long
32	33KV Single T/F Control Panel
33	33 KV VCB 800A, 750 MVA with Steel Structure
34	33 KV C.T 200/100/1A
35	Structure of 33 KV CT
36	33 KV LA
37	Structure of 33 KV LA
38	33 KV Fuse Set
39	Structure of 33KV Fuse set
40	33 KV Bus Isolator
41	Structure of 33 KV Bus Isolator
42	33 KV Post Insulator
43	Structure of 33 KV Post Insulator
44	90 Ib,Rail pieces (44.64 Kg/M)
45	ACSR Dog Conductor
46	11 KV XLPE Cable 3×300 mm2,
47	11 KV XLPE Cable 3×185 mm2
48	11 KV VCB 600/300/5A , 350 MVA I/C
49	11 KV VCB (Out going) 200/100/5A 350 MVA
50	11 KV Bus Coupler
51	Fresh T/F Oil
52	Earthing of S/s Outdoor equipments (earthmat)
53	Construction of power transformer plinth for 5 MVA transformer of size 3.5 x 3.5 x 1.5 mtr. including cost of all material as per drawing.
54	Earthing of 5 MVA power transformer body earthing at including cost of G.I. strip,G.I. pipe 1.5” dia 40’ long and other earthing materials required .
55	Earthing of equipments like control Panel(1),11KV VCB I/C (1),LA(1) including cost of G.I. strip,G.I. pipe 1.5” dia 40’ long and other earthing materials required.(Delta type earthing)
56	Filling of Transformer oil In Installed 5 MVA Power Transformer
57	Providing & Jointing charges of 11 KV “XLPE” C/J kit 3 x 300/185 mm2 indoor/Outdoor type
58	Neutral earthing of 5 MVA transformer complete including cost of G.I. strip, G.I. pipe 1.5” dia 30’ long and other earthing materials (delta type earthing)
59	G.I. Stand For neutral earthing of 5 MVA transformer with help of G.I. strip 50 x 8 mm and copper flexible bond etc. with G.I.angle , channel support and grouting.
60	providing , erection and Grouting of required channel/angle for cable stand and welding of M.S. flat at equal distance for fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of T/F Bushings.
61	Installation of 33 KV control panel for “VCB” with complete earthing with installation of battery and battery charger in control room and making connection.
62	Laying of 11 KV “XLPE” power cable 3 x 300 mm2 / 185 mm2 mm2 including digging of pits of xize 0.5 x 0.5 mtr. covering of cable with sand and 1st class brick around the cable./ HDD Method as Per site requirement
63	Laying of 11KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete work.
64	GI Pipe Earthing Complete for Cable jointing Kit with materials
65	Erection of Double pole structure on 11 Mtr S.T Pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories (M.S. angle iron bracing with clamps, 100x50mmX2240 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete).
66	Grouting of stay rods (16 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.
67	Shifting of 11 KV switchgear to control room and placing in control room with grouting of bolts and mounting of switchgear panels properly.
68	Electrical connection of 11 KV switchgear panel and fitting of Bus Bar and P.T.
69	Testing of 11 KV switchgear panel in all respect.
70	Providing of 03 Phase Generator on Rent Basis for Testing of Power Transformer and Related other Equipment.etc
71	Laying of various typt of control cables
72	Making of control cable trench in switchyard including cost of sand and 1st class bricks size 0.3m wide X 0.5m depth.with hanger and RCC covering plate
73	Erection, grouting and mounting of “VCB” Structure, fitting of “VCB” on erected structure with complete earthing.
74	Erection, grouting and mounting of CT structure. fitting of “CT” on erected structure with complete earthing.
75	Erection grouting and earthing of following structure.
76	33 KV Bus Isolator structure
77	33 KV fuse set structure
78	33 KV Post insulator structure
79	33 KV L.A. structure
80	Mounting and fitting of equipment on erected structures.
81	33 KV Bus – Isolator 400 Amp.
82	33 KV Post Insulator
83	33 KV LA
84	33 KV fuse set ( Copper strip as required size for 33 KV fuse set)
85	Earhing of outdoor type switchyard earthing for newly erected structure as per proper specification with GI Earthing strip.
86	Jumpring form 33 KV Bus bar to post insulator, bus isolator, VCB, CT and LA to 5 MVA transformer etc.( Providing alluminium Lug and PG Clamp)
87	Construction of approach road inside the switchyard 1.5 Mtr. wide with 1st class bricks on edge soling and tipping complete work including cost of all materials.
88	Dismantling of existing pale fencing and resetting after completion of transformer work.
89	Painting of newly erected structure in switchyard (Applying on coat of good quality red oxide & aluminium paint)
90	Part A (Materials Provided by contractor) 02 No. 11 KV line Dhanewa Dhanei
91	F-bracket for 11 KV
92	Holding Clamp for Top Channel & Ms channel/Dropper
93	Clamp for 11 KV \\"V\\" type Cross arm with bolts and nuts
94	Number Plate with clamp and Nut & Bolt
95	Danger Plate with clamp and Nut & Bolt
96	G I Barbed Wire
97	Nut Bolt and washer all sizes
98	PG Clamp
99	Bracing Angle Iron with holding clamp
100	11 KV E Bracket
101	11 KV T-off Channel
102	T-off Channel holding clamp with Bolts and Nuts
103	MS Guarding Angle
104	GI Wire 6 SWG
105	Gi Wire 8 SWG
106	Stay Rod
107	Stay wire 7/8 swg
108	Stay Clamp
109	Al. Paint
110	Red Oxide Paint
111	Polymeric 11KV Pin Insulator
112	Disc Fitting for T&C 45 KN
113	Disc Insulator T&C 45 KN
114	Earthing of Pole by M S Earthing Rod 20 x 2500 mm and 6 SWG earthing wire etc
115	11KV Cable 3x185sq.mm J/kit
116	PART - B- WORKShifting, Loading Carriage & Unloading of following materials from store centre Maharajganj to work site
117	P.C.C. Pole 9 M long
118	S.T. Pole – 11 Mtr. Long
119	11 KV ‘XLPE’ Cable 3x185mm²
120	ACSR Weasel Conductor
121	11 KV \\"V\\" tyoe cross arm
122	Top Channel 100x50x6 mm, 2400 mm long
123	Erection of Single pole structure on 9 Mtr PCC Pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories for Single circuit ( 'V' type cross arm 100 x 50 x 6 mm, M.S. Channel (7.9 Kg./M) clamps with bolt and nut, composite polymer pin, insulator, danger board with clamp, barbed wire earthing, etc. complete).
124	Erection of Double pole structure on 9 Mtr PCC Pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories ((M.S. angle iron bracing with clamps, 100x50mmX2240 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete)) .
125	Erection of Single pole structure on 11mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories for double circuit ( 'V' type cross arm 100 x 50 x 6 mm, M.S. Channel clamps with bolt and nut, composite polymer pin, insulator, danger board with clamp, Alluminium paint, red oxide paint, barbed wire earthing, etc. complete).
126	Erection of Double pole structure on 11Mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron bracing with clamps, top channel with clamps, danger board with clamp, barbed wire earthing, etc. complete).
127	Grouting of stay rods (16 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.
128	Guarding between two poles like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, cutting, fabrication and fixing of guarding channel with clamps nut & bolts etc. as per drawing.
129	Laying, spreading, lifting and final sagging of 3 phases of ACSR Weasel conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.
130	Digging & laying of 11 KV Cable (Double ckt) with sand & brick and back filling
131	Laying of 11 KV Cable in Air & Looping work Complete
132	Making of J/kit
133	Special pipe earthing
134	Making of Sectional T-off Pole with all fitting complete work.
135	Chopping of branches of trees of eucalyptus, Neem, Keekar and other kind of trees along the route of the line and disposal of the same at suitable place. (Including existing line)
136	Work-02 (Nichlaul Tehsil Increasing Capacity 1x5 MVA to 2x5 MVA)PART - A- MATERIAL PROVIDED BY CONTRACTOR
137	11 KV cable jointing kit 3×300 mm outdoor
138	11 KV cable jointing kit 3×300mm indoor
139	11 KV cable jointing kit 3×185 mm outdoor
140	11 KV cable jointing kit 3×185 mm Indoor
141	Top Channel 100x50x6 mm, 2400 mm long
142	Holding Clamp
143	Complete Stay Set
144	Disc Fitting for T&C 45 KN
145	Disc Insulator T&C 45 KN
146	Polymeric 11KV Pin Insulator
147	PG Clamp
148	Number Plate with clamp and Nut & Bolt
149	Danger Plate with clamp and Nut & Bolt
150	MS Dropper Angle
151	M S Earthing Rod 20 x 2500 mm
152	Barbered Wire
153	11 KV E Bracket
154	Armoured Copper Control Cable 2×2.5 mm2
155	Armoured Copper Control Cable 4×2.5 mm2
156	24 volt battery and battery charger with cabinet
157	GI pipe 6\\" dia over the 3x300/185 sqmm XLPE cable
158	Holding Clamp for 11 KV Cable
159	Holding Clamp For GI pipe / Cable(3x185sqmm) & Dropper Channel
160	M.S. Nut & Bolt Various size with washer
161	Structure For cable support
162	\\"L\\" Type Structure for Neutral
163	P.G Clamp For Dog
164	Rubber Mat
165	PART - B- WORKShifting & loading of following materials on private truck at store centre Maharajganj & carriage up to 33/11 KV Sub-Station Nichlaul Tehsil, Distt- Maharajganj & Un-loading of the same with proper stacking (Distance about 0 to 65 km)
166	PCC Pole 8.5 Mtr Long
167	33KV Single T/F Control Panel
168	33 KV VCB 800A, 750 MVA with Steel Structure
169	33 KV C.T 200/100/1A
170	Structure of 33 KV CT
171	33 KV LA
172	Structure of 33 KV LA
173	33 KV Fuse Set
174	Structure of 33KV Fuse set
175	33 KV Line Isolator
176	33 KV Bus Isolator
177	Structure of 33 KV Bus Isolator
178	33 KV Post Insulator
179	Structure of 33 KV Post Insulator
180	90 Ib,Rail pieces (44.64 Kg/M)
181	ACSR Dog Conductor
182	11 KV XLPE Cable 3×300 mm2,
183	11 KV XLPE Cable 3×185 mm2
184	11 KV VCB 600/300/5A , 350 MVA I/C
185	11 KV VCB (Out going) 200/100/5A 350 MVA
186	11 KV Bus Coupler
187	Fresh T/F Oil
188	Earthing of S/s Outdoor equipments (earthmat)
189	Construction of power transformer plinth for 5 MVA transformer of size 3.5 x 3.5 x 1.5 mtr. including cost of all material as per drawing.
190	Earthing of 5 MVA power transformer body earthing at including cost of G.I. strip,G.I. pipe 1.5” dia 40’ long and other earthing materials required .
191	Earthing of equipments like control Panel(1),11KV VCB I/C (1),LA(1) including cost of G.I. strip,G.I. pipe 1.5” dia 40’ long and other earthing materials required.(Delta type earthing)
192	Filling of Transformer oil In Installed 5 MVA Power Transformer
193	Providing & Jointing charges of 11 KV “XLPE” C/J kit 3 x 300/185 mm2 indoor/Outdoor type
194	Neutral earthing of 5 MVA transformer complete including cost of G.I. strip, G.I. pipe 1.5” dia 30’ long and other earthing materials (delta type earthing)
195	G.I. Stand For neutral earthing of 5 MVA transformer with help of G.I. strip 50 x 8 mm and copper flexible bond etc. with G.I.angle , channel support and grouting.
196	providing , erection and Grouting of required channel/angle for cable stand and welding of M.S. flat at equal distance for fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of T/F Bushings.
197	Installation of 33 KV control panel for “VCB” with complete earthing with installation of battery and battery charger in control room and making connection.
198	Laying of 11 KV “XLPE” power cable 3 x 300 mm2 / 185 mm2 mm2 including digging of pits of xize 0.5 x 0.5 mtr. covering of cable with sand and 1st class brick around the cable.
199	Laying of 11KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete work.
200	GI Pipe Earthing Complete for Cable jointing Kit with materials
201	Erection of Double pole structure on 8.5 Mtr PCC Pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories (M.S. angle iron bracing with clamps, 100x50mmX2240 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete).
202	Grouting of stay rods (16 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.
203	Shifting of 11 KV switchgear to control room and placing in control room with grouting of bolts and mounting of switchgear panels properly.
204	Electrical connection of 11 KV switchgear panel and fitting of Bus Bar and P.T.
205	Testing of 11 KV switchgear panel in all respect.
206	Providing of 03 Phase Generator on Rent Basis for Testing of Power Transformer and Related other Equipment.etc
207	Laying of various typt of control cables
208	Making of control cable trench in switchyard including cost of sand and 1st class bricks size 0.3m wide X 0.5m depth.with hanger and RCC covering plate
209	Erection, grouting and mounting of “VCB” Structure, fitting of “VCB” on erected structure with complete earthing.
210	Erection, grouting and mounting of CT structure. fitting of “CT” on erected structure with complete earthing.
211	Erection grouting and earthing of following structure.
212	33 KV Bus Isolator structure
213	33 KV fuse set structure
214	33 KV Post insulator structure
215	33 KV L.A. structure
216	Mounting and fitting of equipment on erected structures.
217	33 KV Line Isolator
218	33 KV Bus – Isolator
219	33 KV Post Insulator
220	33 KV LA
221	33 KV fuse set ( Copper strip as required size for 33 KV fuse set)
222	Earhing of outdoor type switchyard earthing for newly erected structure as per proper specification with GI Earthing strip.
223	Jumpring form 33 KV Bus bar to post insulator, bus isolator, VCB, CT and LA to 5 MVA transformer etc.( Providing alluminium Lug and PG Clamp)
224	Construction of approach road inside the switchyard 1.5 Mtr. wide with 1st class bricks on edge soling and tipping complete work including cost of all materials.
225	Dismantling of existing pale fencing and resetting after completion of transformer work.
226	Painting of newly erected structure in switchyard (Applying on coat of good quality red oxide & aluminium paint)
227	Part A (Materials Provided by contractor) 02 No. 11 KV line Nichlaul Tehsil
228	Holding Clamp for Top Channel & Ms channel/Dropper
229	Number Plate with clamp and Nut & Bolt
230	Danger Plate with clamp and Nut & Bolt
231	G I Barbed Wire
232	Nut Bolt and washer all sizes
233	PG Clamp
234	Stay Rod
235	Stay wire 7/8 swg
236	Stay Clamp
237	Disc Fitting for T&C 45 KN
238	Disc Insulator T&C 45 KN
239	Earthing of Pole by M S Earthing Rod 20 x 2500 mm and 6 SWG earthing wire etc
240	11KV Cable 3x185sq.mm J/kit
241	Ms Channel/Dropper
242	GI Pipe 6” Dia
243	Holding clamp for GI Pipe and Cable
244	PART - B- WORKShifting, Loading Carriage & Unloading of following materials from store centre Maharajganj to work site
245	P.C.C. Pole 8.5M long
246	11 KV ‘XLPE’ Cable 3x185mm²
247	ACSR Weasel Conductor
248	Top Channel 100x50x6 mm, 2400 mm long
249	Erection of End double pole structure for cable riser on 8.5 mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles , grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories (M.S. angle iron bracing with clamps, 100x50mmX2240 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete) .
250	Grouting of stay rods (16 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.
251	Digging & laying of 11 KV Cable (Double ckt) with sand & brick and back filling
252	Laying of 11 KV Cable in Air & Looping work Complete
253	Making of J/kit
254	Special pipe earthing
255	Work-03 (Ghughali (10+5 MVA to 2x10 MVA)PART - A- MATERIAL PROVIDED BY CONTRACTOR
256	Structure For cable support
257	\\"L\\" Type Structure for Neutral
258	Armoured Copper Control Cable 2×2.5 mm2
259	Armoured Copper Control Cable 4×2.5 mm2
260	11 KV cable jointing kit 3×300 mm outdoor heat shrinkable Type
261	11 KV cable jointing kit 3×300mm indoor heat shrinkable Type
262	11 KV cable jointing kit 3×185 mm outdoor heat shrinkable Type
263	11 KV cable jointing kit 3×185 mm Indoor heat shrinkable Type
264	GI pipe 6\\" dia over the 3x300/185 sqmm XLPE cable
265	Holding Clamp for 3×300 XLPE 11 KV Cable
266	MS dropper Channel
267	GI pipe/cable(3x185sqmm) & dropper Channel Holding Clamp
268	M.S. Nut Bolt and washers
269	P.G Clamp For Dog to Dog
270	Rubber Mat
271	PART - B WORKShifting & loading of following materials on private truck at store centre Maharajganj & carriage up to 33/11 KV Sub-Station Ghughuli, Distt- Maharajganj & Un-loading of the same with proper stacking (Distance about 0 to 55 km)
272	3×300 mm2, 11 KV XLPE Cable
273	33KV Control Panel for Single Feeder
274	33 KV VCB 800A, 750 MVA with Steel Structure
275	33 KV C.T 200/100/1A
276	Structure of 33 KV CT
277	33 KV LA
278	Structure of 33 KV LA
279	11 KV 3×185 mm2 XLPE Cable
280	ACSR Dog Conductor
281	Repairing of plinth and foundation for 10 MVA transformer as per required specification. Dismantling of T/F all connection.
282	Dismentling of existing 2 no body and 1 no Neutral earthing safely of existing 5 MVA power transformer earthing for installation of new 10 MVA T/F and re-earthing of new 10 MVA T/F by old earth strip including providing required length of GI Earth strip .The earthing of 10 MVA T/F Included all work completed as per required specification of RESSPO norms.
283	Dismentling of HT jumpers, 11 KV C/J kit and different earthing of 5 MVA T/F drain out T/F oil after closing wall and opening of radiator for shifting of existing 5 MVA T/F from plinth about 30 mtr. Distance & resetting of All accessories etc. complete work.
284	Jointing charges of 11 KV “XLPE” C/J kit 3 x 300/185 mm2 Indoor/Outdoor type
285	Laying of 11 KV “XLPE” power cable 3 x 300/185 mm2 including digging of pits of size 0.5 x 0.5 mtr. covering of cable with sand and 1st class brick around the cable./HDD Method as per site requirment.
286	Laying of 11KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete work.
287	GI Pipe Earthing Complete for Cable jointing Kit with materials
288	Earthing of equipments like control Panel(1),11KV VCB I/C (1),LA(1) including cost of G.I. strip,G.I. pipe 1.5” dia 40’ long and other earthing materials required.(Delta type earthing)
289	Earthing of 10 MVA power transformer body earthing at including cost of G.I. strip,G.I. pipe 1.5” dia 40’ long and other earthing materials required.
290	Neutral earthing of 10 MVA T/F Complete including cost of GI Strip, GI Pipe 1.5\\" dia and 40' long and other earthing materials(Delta type).
291	Laying of various typt of control cables
292	Jumpring from 33 KV Bus bar to LA to 10 MVA transformer etc.( Providing alluminium Lug)
293	Installation of 33 KV control panel for “VCB” with complete earthing with installation of battery and battery charger in control room and making connection.
294	Erection, grouting and mounting of “VCB” Structure, fitting of “VCB” on erected structure with complete earthing.
295	Erection, grouting and mounting of CT structure. fitting of “CT” on erected structure with complete earthing.
296	Erection, grouting and mounting of LA structure. fitting of “LA” on erected structure with complete earthing.
297	Mounting and fitting of 33 KV LA on erected structures.
298	Painting of erected structure in switchyard (Applying on coat of good quality red oxide primer & good quality of high class luxol aluminium paint)
299	Dismantling of existing pale fencing and resetting after completion of transformer work.
300	Part A (Materials Provided by contractor) 02 No. 11 KV line Ghughali
301	F-bracket for 11 KV
302	Holding Clamp for Top Channel & Ms channel/Dropper
303	Clamp for 11 KV \\"V\\" type Cross arm with bolts and nuts
304	Number Plate with clamp and Nut & Bolt
305	Danger Plate with clamp and Nut & Bolt
306	G I Barbed Wire
307	Nut Bolt and washer all sizes
308	PG Clamp
309	Bracing Angle Iron with holding clamp
310	11 KV E Bracket
311	11 KV T-off Channel
312	T-off Channel holding clamp with Bolts and Nuts
313	MS Guarding Angle
314	GI Wire 6 SWG
315	Gi Wire 8 SWG
316	Stay Rod
317	Stay wire 7/8 swg
318	Stay Clamp
319	Al. Paint
320	Red Oxide Paint
321	Polymeric 11KV Pin Insulator
322	Disc Fitting for T&C 45 KN
323	Disc Insulator T&C 45 KN
324	Earthing of Pole by M S Earthing Rod 20 x 2500 mm and 6 SWG earthing wire etc
325	11KV Cable 3x185sq.mm J/kit
326	PART - B- WORKShifting, Loading Carriage & Unloading of following materials from store centre Maharajganj to work site
327	11 kv Outgoing Pannel
328	P.C.C. Pole 8.5M long
329	S.T. Pole – 11 Mtr. Long
330	11 KV ‘XLPE’ Cable 3x185mm²
331	ACSR Weasel Conductor
332	11 KV \\"V\\" tyoe cross arm
333	Top Channel 100x50x6 mm, 2400 mm long
334	Erection of Single pole structure on 8.5 Mtr PCC Pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories for Single circuit ( 'V' type cross arm 100 x 50 x 6 mm, M.S. Channel (7.9 Kg./M) clamps with bolt and nut, composite polymer pin, insulator, danger board with clamp, barbed wire earthing, etc. complete).
335	Erection of Double pole structure on 8.5 Mtr PCC Pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories ((M.S. angle iron bracing with clamps, 100x50mmX2240 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete)) .
336	Erection of Single pole structure on 11mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories for double circuit ( 'V' type cross arm 100 x 50 x 6 mm, M.S. Channel clamps with bolt and nut, composite polymer pin, insulator, danger board with clamp, Alluminium paint, red oxide paint, barbed wire earthing, etc. complete).
337	Shifting of 11 KV switchgear to control room and placing in control room with grouting of bolts and mounting of switchgear panels properly.
338	Electrical connection of 11 KV switchgear panel and fitting of Bus Bar and P.T.
339	Testing of 11 KV switchgear panel in all respect.
340	Guarding between two poles like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, cutting, fabrication and fixing of guarding channel with clamps nut & bolts etc. as per drawing.
341	Laying, spreading, lifting and final sagging of 3 phases of ACSR Weasel conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.
342	Digging & laying of 11 KV Cable (Double ckt) in trench with sand & brick and back filling
343	Laying of 11 KV Cable in Air & Looping work Complete
344	Making of J/kit
345	Special pipe earthing
346	Making of Sectional T-off Pole with all fitting complete work.
347	Chopping of branches of trees of eucalyptus, Neem, Keekar and other kind of trees along the route of the line and disposal of the same at suitable place. (Including existing line)
348	Work-04 (33 KV Line Baikunthpur from 132/33 KV S/S Maharajganj to 33/11 KV S/S Baikunthpur )PART - A- MATERIAL PROVIDED BY CONTRACTOR
349	33 KV ‘XLPE’ C/J Kit 3x300mm² Outdoor
350	Providing 6” dia.MS G.I. pipe 3m long
351	Holding Clamp for GI Pipe & cable
352	Lug for ACSR Dog Conductor
353	PART – B- WORKShifting,loading and carriage of following materials on private truck at store centre Maharajganj & Un-loading of the same with proper stacking at work site.
354	33 KV ‘XLPE’ Cable 3x300mm²
355	Digging & laying of 33 KV Cable with sand & brick and back filling as per site requirement.
356	Laying of 33KV ‘XLPE’ cable in air and Loop
357	Cable jointing charges of 33 KV XLPE Cable Outdoor
358	GI Pipe Earthing Complete for Cable jointing Kit with materials Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Uttar Pradesh Tenders

Power Generation and Transmission Tenders

Power Transmission Tenders

Transmission Line Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Under The Electricity Secondary Works Division, Gorakhpur For The Increasing Capacity (1X5 Mva To 2X5 Mva) Of 33/11 K.V. Sub-Station Dhanewa Dhanei And Construction Of 02 No. 11 Kv Line From 33/11 Kv S/S Dhanewa Dhanei, Increasing Capacity, Maharajganj-Uttar Pradesh

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Under The Electricity Secondary Works Division, Gorakhpur For The Increasing Capacity (1X5 Mva To 2X5 Mva) Of 33/11 K.V. Sub-Station Dhanewa Dhanei And Construction Of 02 No. 11 Kv Line From 33/11 Kv S/S Dhanewa Dhanei, Increasing Capacity, Maharajganj-Uttar Pradesh

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us