|
| 1 | PART - A- MATERIAL PROVIDED BY CONTRACTOR |
| 2 | 11 KV cable jointing kit 3×300 mm outdoor |
| 3 | 11 KV cable jointing kit 3×300mm indoor |
| 4 | 11 KV cable jointing kit 3×185 mm outdoor |
| 5 | 11 KV cable jointing kit 3×185 mm Indoor |
| 6 | Top Channel 100x50x6 mm, 2400 mm long |
| 7 | Holding Clamp for Top, Dropper, Pipe & Cable |
| 8 | Number Plate with clamp and Nut & Bolt |
| 9 | Armoured Copper Control Cable 2×2.5 mm2 |
| 10 | Armoured Copper Control Cable 4×2.5 mm2 |
| 11 | Structure For cable support |
| 12 | \\"L\\" Type Structure for Neutral |
| 13 | P.G Clamp For Dog |
| 14 | Rubber Mat |
| 15 | Clamp for 11 KV \\"V\\" type Cross arm with bolts and nuts |
| 16 | F-bracket for 11 KV |
| 17 | Polymeric 11KV Pin Insulator |
| 18 | Danger Plate with clamp and Nut & Bolt |
| 19 | G I Barbed Wire |
| 20 | Nut Bolt and washer all sizes |
| 21 | Earthing of Pole by M S Earthing Rod 20 x 2500 mm and 6 SWG earthing wire etc |
| 22 | 11 KV T-off Channel |
| 23 | T-off Channel holding clamp with Bolts and Nuts |
| 24 | 11 KV Polymer Disc Insulator T&C Type |
| 25 | 11 KV. Disc fitting T&C Type |
| 26 | P.G. Clamp for weasel |
| 27 | Stay Complete ( stay Rod 16x1800 mm, stay wire 5 Kg, stay clamp with nut and bolt.) |
| 28 | 11 KV E Bracket |
| 29 | MS Guarding Angle With Clamp |
| 30 | GI Wire 6 SWG |
| 31 | GI Wire 8 SWG |
| 32 | M S Channel 100x50 mm 2400 mm Long |
| 33 | G I Pipe 6\\" Dia |
| 34 | Lug for ACSR Weasel Conductor |
| 35 | PART - B WORKShifting & loading of following materials on private truck at store centre Padrauna & carriage up to 33/11 KV Sub-Station Bhadsar Khas , Distt-Kushinagar & Unloading of the same with proper stacking (Distance about 0 to 40 km) |
| 36 | 33KV Single T/F Control Panel |
| 37 | 33 KV VCB 800A, 750 MVA with Steel Structure |
| 38 | 33 KV C.T 200/100/1A |
| 39 | Structure of 33 KV CT |
| 40 | 33 KV LA |
| 41 | Structure of 33 KV LA |
| 42 | 33 KV Fuse Set |
| 43 | Structure of 33KV Fuse set |
| 44 | 33 KV Bus Isolator |
| 45 | Structure of 33 KV Bus Isolator |
| 46 | 33 KV Post Insulator |
| 47 | Structure of 33 KV Post Insulator |
| 48 | 90 Ib,Rail pieces (44.64 Kg/M) |
| 49 | ACSR Dog Conductor |
| 50 | 11 KV XLPE Cable 3×300 mm2, |
| 51 | 11 KV XLPE Cable 3×185 mm2 |
| 52 | 11 KV VCB 600/300/5A , 350 MVA I/C |
| 53 | 11 KV VCB (Out going) 200/100/5A 350 MVA |
| 54 | 11 KV Bus Coupler |
| 55 | Fresh T/F Oil |
| 56 | 8.5 Mtr PCC Pole |
| 57 | 11 M PCC Pole |
| 58 | ACSR Weasel Conductor |
| 59 | 11 KV \\"V\\" type cross arm 65x65x6 mm, M S Angle |
| 60 | Top Channel 100x50x6 mm, 2400 mm long |
| 61 | Laying of Earthman for Outdoor equipment’s with providing of materials(for proposed 05 MVA TF) |
| 62 | Construction of power transformer plinth for 5 MVA transformer of size 3.5 x 3.5 x 1.5 mtr. including cost of all material as per drawing. |
| 63 | Earthing of 5 MVA power transformer body earthing, including cost of G.I. strip, G.I. pipe 1.5” dia 40’ long and other earthing materials required.(Delta type earthing) |
| 64 | Earthing of equipment like control Panel (1),11KV VCB I/C (1), LA (1) including cost of G.I. strip, G.I. pipe 1.5” dia 40’ long and other earthing materials required. (Delta type earthing) |
| 65 | Jointing charges of 11 KV “XLPE” C/J kit 3 x 300/185 mm2 indoor/Outdoor type |
| 66 | Neutral earthing of 5 MVA transformer complete including cost of G.I. strip, G.I. pipe 1.5” dia 40’ long and other earthing materials (delta type earthing) |
| 67 | Erection & grouting of G.I. Stand For neutral earthing of 5 MVA transformer with help of G.I. strip 50 x 8 mm and copper flexible bond etc. |
| 68 | Erection & grouting of GI cable stand and welding of M.S. flat at equal distance for fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of T/F Bushings. |
| 69 | Installation of 33 KV control panel for “VCB” with complete earthing with installation of battery and battery charger in control room and making connection. |
| 70 | Laying of 11 KV “XLPE” power cable 3 x 300 mm2 / 185 mm2 mm2 including digging of pits of xize 0.5 x 0.5 mtr. covering of cable with sand and 1st class brick around the cable. |
| 71 | Laying of 11KV ‘XLPE’ cable in air after providing 6” dia. M.S G. I pipe 3 m long Complete work. |
| 72 | GI Pipe Earthing Complete for Cable jointing Kit with materials |
| 73 | Shifting of 11 KV switchgear to control room and placing in control room with grouting of bolts and mounting of switchgear panels properly. |
| 74 | Electrical connection of 11 KV switchgear panel and fitting of Bus Bar and P.T. |
| 75 | Testing of 11 KV switchgear panel in all respect. |
| 76 | Laying of various type of control cables |
| 77 | Making of control cable trench in switchyard including cost of sand and 1st class bricks size 0.3m wide X 0.5m depth. with hanger and RCC covering plate |
| 78 | Erection, grouting and mounting of “VCB” Structure, fitting of “VCB” on erected structure with complete earthing. |
| 79 | Erection, grouting and mounting of CT structure. fitting of “CT” on erected structure with complete earthing. |
| 80 | Erection grouting and earthing of following structure. |
| 81 | 33 KV Bus Isolator structure |
| 82 | 33 KV fuse set structure |
| 83 | 33 KV Post insulator structure |
| 84 | 33 KV L.A. structure |
| 85 | Mounting and fitting of equipment on erected structures. |
| 86 | 33 KV Bus – Isolator 400 Amp. |
| 87 | 33 KV Post Insulator |
| 88 | 33 KV LA |
| 89 | 33 KV fuse set (Copper strip as required size for 33 KV fuse set) |
| 90 | Earning of outdoor type switchyard earthing for newly erected structure as per proper specification with GI Earthing strip. |
| 91 | Jumping form 33 KV Bus bar to post insulator, bus isolator, VCB, CT and LA to 5 MVA transformer etc. (Providing aluminum Lug and PG Clamp) |
| 92 | Providing of Generator on Rent Basis for Testing of Power Transformer and Related other Equipment etc |
| 93 | Construction of approach road inside the switchyard 1.5 Mtr. wide with 1st class bricks on edge soling and tipping complete work including cost of all materials. |
| 94 | Painting of newly erected structure in switchyard (Applying on coat of good quality red oxide & aluminum paint) |
| 95 | Commissioning of 11 KV panels |
| 96 | Oil filling in power transformer received from store |
| 97 | Erection of Sectional T-Off ,Single pole structure on 8.5 Mtr PCC Pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories for Single circuit ( 'V' type cross arm 100 x 50 x 6 mm, M.S. Channel (7.9 Kg./M) clamps with bolt and nut, composite polymer pin, insulator, danger board with clamp, barbed wire earthing, etc. complete). |
| 98 | Erection of Single pole structure on 8.5 Mtr PCC Pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories for Single circuit ( 'V' type cross arm 100 x 50 x 6 mm, M.S. Channel (7.9 Kg./M) clamps with bolt and nut, composite polymer pin, insulator, danger board with clamp, barbed wire earthing, etc. complete). |
| 99 | Erection of Double pole structure on 8.5 mtr PCC Pole for one side O/H & one side cable rising including all works of evocation of pit, pole erection, making plinth for poles , grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories (M S Channel 100x50 mm 2400 mm Long with clamps, 100x50mmX2240 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete). |
| 100 | Erection of Sectional T-Off ,Single pole structure on 11mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles , grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories for double circuit ( 'V' type cross arm 100 x 50 x 6 mm, M.S. Channel (7.9 Kg./M) clamps with bolt and nut, composite polymer pin, insulator, danger board with clamp, Aluminum paint, red oxide paint, barbed wire earthing, etc. complete). |
| 101 | Erection of Single pole structure on 11mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles , grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories for double circuit ( 'V' type cross arm 100 x 50 x 6 mm, M.S. Channel (7.9 Kg./M) clamps with bolt and nut, composite polymer pin, insulator, danger board with clamp, Aluminum paint, red oxide paint, barbed wire earthing, etc. complete). |
| 102 | Grouting of stay rods (16 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nuzzling of stay wire with stay rod with the poles of required tension as per drawing. |
| 103 | Guarding between two poles like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, cutting, fabrication and fixing of guarding channel 75 x 40 x 3010 mm with clamps nut & bolts etc. as per drawing. |
| 104 | Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jump ring and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel. |
| 105 | Chopping of branches of trees of eucalyptus, Neem, Keekar and other kind of trees along the route of the line and disposal of the same at suitable place. (Including existing line) Please Enable Macros to View BoQ information |
