|
| 1 | SUB-STATION PART:- 33 KV Line Isolator. | SUB-STATION PART:- 33 KV Line Isolator. |
| 2 | 33 KV Bus Isolator. | 33 KV Bus Isolator. |
| 3 | 33 KV Lightening Arrestors | 33 KV Lightening Arrestors |
| 4 | 33/11 KV Transformer 5 MVA | 33/11 KV Transformer 5 MVA |
| 5 | 33 KV VCB 800A, 750MVA with Steel structure | 33 KV VCB 800A, 750MVA with Steel structure |
| 6 | Control panel I/C for 33 KV single T/F | Control panel I/C for 33 KV single T/F |
| 7 | Control panel I/C for 33 KV double T/F | Control panel I/C for 33 KV double T/F |
| 8 | 33 KV CT 400/200/1A | 33 KV CT 400/200/1A |
| 9 | 33 KV CT 200/1A | 33 KV CT 200/1A |
| 10 | 33 KV 1 Ph PT 33 KV/110 V | 33 KV 1 Ph PT 33 KV/110 V |
| 11 | 11 KV SWITCH GEARS VCB:- (i) Incoming VCB 600/300/5A, 350MVA, I /C | 11 KV SWITCH GEARS VCB:- (i) Incoming VCB 600/300/5A, 350MVA, I /C |
| 12 | (ii) Outgoing VCB 200/100/5A, 350MVA | (ii) Outgoing VCB 200/100/5A, 350MVA |
| 13 | (iii) 11 KV Bus coupler (1250A) | (iii) 11 KV Bus coupler (1250A) |
| 14 | 11KV 3 Core XLPE Cable:- (i) 3 × 300 Sq.mm | 11KV 3 Core XLPE Cable:- (i) 3 × 300 Sq.mm |
| 15 | (ii) 3 × 185 Sq.mm | (ii) 3 × 185 Sq.mm |
| 16 | 11KV Cable jointing kit. Heat Shrinkable:- (i) 300 Sq.mm Indoor | 11KV Cable jointing kit. Heat Shrinkable:- (i) 300 Sq.mm Indoor |
| 17 | (ii) 300 Sq.mm Outdoor | (ii) 300 Sq.mm Outdoor |
| 18 | (iii) 185 Sq.mm. Indoor | (iii) 185 Sq.mm. Indoor |
| 19 | (iv) 185 Sq.mm. Outdoor | (iv) 185 Sq.mm. Outdoor |
| 20 | 11/0.4 KV, 63 KVA Transformer. | 11/0.4 KV, 63 KVA Transformer. |
| 21 | 33 KV Terminal Gantry with Plinth & Foundation as per RESSPO Schedule | 33 KV Terminal Gantry with Plinth & Foundation as per RESSPO Schedule |
| 22 | Main Bus Bar complete with Structure. Plinth & Foundation as per RESSPO Schedule | Main Bus Bar complete with Structure. Plinth & Foundation as per RESSPO Schedule |
| 23 | Structure for Bus Isolator with Plinth & Foundation 125x65x6MM G.I Channel) | Structure for Bus Isolator with Plinth & Foundation 125x65x6MM G.I Channel) |
| 24 | Structure for Line Isolator with Plinth & Foundation 125x65x6MM G.I Channel) | Structure for Line Isolator with Plinth & Foundation 125x65x6MM G.I Channel) |
| 25 | 33 KV Post Insulator | 33 KV Post Insulator |
| 26 | Structure for Post Insulator with Plinth & Foundation 125x65x6MM G.I Channel) | Structure for Post Insulator with Plinth & Foundation 125x65x6MM G.I Channel) |
| 27 | Structure for Lightening Arrestors with Plinth & Foundation (125x65x6MM G.I Channel) | Structure for Lightening Arrestors with Plinth & Foundation (125x65x6MM G.I Channel) |
| 28 | 90 Lbs. Rail pieces for T/F | 90 Lbs. Rail pieces for T/F |
| 29 | CT Steel structure with Plinth & Foundation (125x65x6MM G.I Channel) | CT Steel structure with Plinth & Foundation (125x65x6MM G.I Channel) |
| 30 | Structure for P T with Plinth & Foundation (125x65x6MM G.I Channel) | Structure for P T with Plinth & Foundation (125x65x6MM G.I Channel) |
| 31 | 33 KV Fuse Set | 33 KV Fuse Set |
| 32 | Structure for fuse Set with Plinth & Foundation (125x65x6MM G.I Channel) | Structure for fuse Set with Plinth & Foundation (125x65x6MM G.I Channel) |
| 33 | 24 V Battery with Battery Charger and Cabinet. | 24 V Battery with Battery Charger and Cabinet. |
| 34 | Control Cable 4 × 2.5 Sq.mm. | Control Cable 4 × 2.5 Sq.mm. |
| 35 | Control Cable 2 × 2.5 Sq.mm. | Control Cable 2 × 2.5 Sq.mm. |
| 36 | Earthing of Sub-Station:-(As per RESSPO Schedule) (i) Earth Mat for outdoor equipment | Earthing of Sub-Station:-(As per RESSPO Schedule) (i) Earth Mat for outdoor equipment |
| 37 | (ii) Earth Mat for equipments like control panel (1), 11 KV VCB I/C (1), LA (1), Transformer neutral-delta (3) (LS) | (ii) Earth Mat for equipments like control panel (1), 11 KV VCB I/C (1), LA (1), Transformer neutral-delta (3) (LS) |
| 38 | Pipe Earthing of Power Transformer by way of boring and lowering of “B” class G.I. pipe 40 mm. dia. into the ground up to the water level to the lower end of which a solid copper con approx 9 inches long and 750 gram in weight provided and screwed in connecting and bringing out continuous copper wire 8 SWG from the cone to the ground surface where it will be bolted to the G.I. Earth strip for Transformer neutral connection. The earth strip will be welded to the G.I. pipe. The work also includes cap and clamp for pouring water, the cost of all material with all labour and T&P etc. complete in all respect. | Pipe Earthing of Power Transformer by way of boring and lowering of “B” class G.I. pipe 40 mm. dia. into the ground up to the water level to the lower end of which a solid copper con approx 9 inches long and 750 gram in weight provided and screwed in connecting and bringing out continuous copper wire 8 SWG from the cone to the ground surface where it will be bolted to the G.I. Earth strip for Transformer neutral connection. The earth strip will be welded to the G.I. pipe. The work also includes cap and clamp for pouring water, the cost of all material with all labour and T&P etc. complete in all respect. |
| 39 | Chemical Pipe Earthing | Chemical Pipe Earthing |
| 40 | Painting of Sub-Station structure & Equipment | Painting of Sub-Station structure & Equipment |
| 41 | PG Clamp | PG Clamp |
| 42 | 33 KV Polymeric Disc Insulators B&S Type 7000 Kg. for Main BusBar | 33 KV Polymeric Disc Insulators B&S Type 7000 Kg. for Main BusBar |
| 43 | Disc Fittings for Dog/Raccoon 7000 Kg. for Main BusBar | Disc Fittings for Dog/Raccoon 7000 Kg. for Main BusBar |
| 44 | CONDUCTOR A.C.S.R. Dog conductor for switch yard | CONDUCTOR A.C.S.R. Dog conductor for switch yard |
| 45 | Polymeric 33 KV Pin Insulator | Polymeric 33 KV Pin Insulator |
| 46 | Top Channel 125 x 65 x 3200 mm. with nuts & bolts (Galvanized) | Top Channel 125 x 65 x 3200 mm. with nuts & bolts (Galvanized) |
| 47 | \\"L\\" Type Structure for Neutral : Fabrication and grouting of Channel 100x50x6 mm. in L shape & in proper size and alignment to provide support for separate Earthing strips for power transformer neutral including supply & fixing of flexible copper earth braid (0.5 Mtr. long 65x8 mm size) bonds for neutral Earthing. Making delta by 6 nos. earthing electrodes of 32 mm dia. (including fabrication of earthing electrodes) will be connected to neutral earthing through separate earthing strip (as per RESPO). The work also includes painting of Channel with two coats of aluminium paint and the cost of all material with all labour and T&P etc. complete in all respect. (Galvanized) | \\"L\\" Type Structure for Neutral : Fabrication and grouting of Channel 100x50x6 mm. in L shape & in proper size and alignment to provide support for separate Earthing strips for power transformer neutral including supply & fixing of flexible copper earth braid (0.5 Mtr. long 65x8 mm size) bonds for neutral Earthing. Making delta by 6 nos. earthing electrodes of 32 mm dia. (including fabrication of earthing electrodes) will be connected to neutral earthing through separate earthing strip (as per RESPO). The work also includes painting of Channel with two coats of aluminium paint and the cost of all material with all labour and T&P etc. complete in all respect. (Galvanized) |
| 48 | Structure For cable support : Fabrication and erection of cable support made of two pieces of 100x50x6 mm. (4.5 x 2 No. = 9.0 mtr. long), joined to each other by means of 5 Nos. flat 50x6 mm. pieces of size 150 mm. long each by welding at equal intervals as per drawing and exacavation of earth in all type of soil (0.75x0.7x0.5 Mtr.) and grouting and plinthing of cable stand (1x0.75x0.5 Mtr.). Above work also include two coats of Aluminum paint and the cost of all material with all labour and T&P etc. complete in all respect. (Galvanized) | Structure For cable support : Fabrication and erection of cable support made of two pieces of 100x50x6 mm. (4.5 x 2 No. = 9.0 mtr. long), joined to each other by means of 5 Nos. flat 50x6 mm. pieces of size 150 mm. long each by welding at equal intervals as per drawing and exacavation of earth in all type of soil (0.75x0.7x0.5 Mtr.) and grouting and plinthing of cable stand (1x0.75x0.5 Mtr.). Above work also include two coats of Aluminum paint and the cost of all material with all labour and T&P etc. complete in all respect. (Galvanized) |
| 49 | PLINTH OF 5 MVA, 33/11 KV TRANSFORMERS : Construction of plinth of size 3.46x4.46 Mtr. for 5 MVA Transformers as per Resspo norms. | PLINTH OF 5 MVA, 33/11 KV TRANSFORMERS : Construction of plinth of size 3.46x4.46 Mtr. for 5 MVA Transformers as per Resspo norms. |
| 50 | Plinth & Foundation of 33 KV VCB | Plinth & Foundation of 33 KV VCB |
| 51 | 11 KV Cable laying Including cost of sand and Bricks | 11 KV Cable laying Including cost of sand and Bricks |
| 52 | Cost of Furniture for control room (Steel table, chair, branch & rack) :(Office Chair with arms made of Wooden with proper cane seat & back. - 2 no,Office Table having size 1520 x 900 x 760 mm. made of Steel Pipe in square shape having two No. Drawers & 10 mm. Top Board with Sun mica. - 2 No., Sitting Bench made of Steel Pipe of size 183 x 450 mm. with three seats with Sun mica - 1 No.,Stool of size 450 x 300 x 455 mm. having sitting top of 12 mm. Board with sun mica. - 2 No., Office rack made of Steel Pipe & M.S. Sheet of size 750 x 900 x 400mm. - 1 NoCost of Fire Fighting equipment with stand complete : Fire extinguisher CO2 type 5.0 Kg. capacity I.S.I. mark. - 1 No, Fire extinguisher CO2 type 4.5 Kg. capacity I.S.I. mark. - 1 No.,Fire Bucket stand size 1500x1200mm. having M.S. Channel 100x50 mm base with cross triangular bracing of M.S. Angle 50x50x6 mm and base of 100x50 mm. Channel 600 mm long having pipe 25 mm and boxing pipe of size 32 mm. including welded with M.S. hooks rigidly and nicely painted with one coat of red oxide primer & two coat of red enamel paint of best quality. - 1 No., Fire bucket made of B.P. sheet 20 gage ( conical shape ) having capacity 10 Ltr.- 10” dia with bar handle for hanging of bucket including nicely painted in inner portion with one coat of red oxide primer & two coat of channel white paint & outer side with one coat of red oxide primer & two coat of post office red colour & written work “AAG” in Hindi. - 4 No.,Chakkered rubbur sheet 2000x1000x10 mm. I.S.I. mark. - 4 No.,Cost of Boards :Making and fixing of protection Board alongwith all accessories complete made of sunmica 10 mm sheet size 45×60 Cm. - 2 Job., Supply and fixing of sub-station name board made of M.S. Angle 50×50×6 mm and S.P. Sheet of 18 SWG including painting and writing. - 1 Job. | Cost of Furniture for control room (Steel table, chair, branch & rack) :(Office Chair with arms made of Wooden with proper cane seat & back. - 2 no,Office Table having size 1520 x 900 x 760 mm. made of Steel Pipe in square shape having two No. Drawers & 10 mm. Top Board with Sun mica. - 2 No., Sitting Bench made of Steel Pipe of size 183 x 450 mm. with three seats with Sun mica - 1 No.,Stool of size 450 x 300 x 455 mm. having sitting top of 12 mm. Board with sun mica. - 2 No., Office rack made of Steel Pipe & M.S. Sheet of size 750 x 900 x 400mm. - 1 NoCost of Fire Fighting equipment with stand complete : Fire extinguisher CO2 type 5.0 Kg. capacity I.S.I. mark. - 1 No, Fire extinguisher CO2 type 4.5 Kg. capacity I.S.I. mark. - 1 No.,Fire Bucket stand size 1500x1200mm. having M.S. Channel 100x50 mm base with cross triangular bracing of M.S. Angle 50x50x6 mm and base of 100x50 mm. Channel 600 mm long having pipe 25 mm and boxing pipe of size 32 mm. including welded with M.S. hooks rigidly and nicely painted with one coat of red oxide primer & two coat of red enamel paint of best quality. - 1 No., Fire bucket made of B.P. sheet 20 gage ( conical shape ) having capacity 10 Ltr.- 10” dia with bar handle for hanging of bucket including nicely painted in inner portion with one coat of red oxide primer & two coat of channel white paint & outer side with one coat of red oxide primer & two coat of post office red colour & written work “AAG” in Hindi. - 4 No.,Chakkered rubbur sheet 2000x1000x10 mm. I.S.I. mark. - 4 No.,Cost of Boards :Making and fixing of protection Board alongwith all accessories complete made of sunmica 10 mm sheet size 45×60 Cm. - 2 Job., Supply and fixing of sub-station name board made of M.S. Angle 50×50×6 mm and S.P. Sheet of 18 SWG including painting and writing. - 1 Job. |
| 53 | Sundry Charges | Sundry Charges |
| 54 | Survey and lay out of Sub-station | Survey and lay out of Sub-station |
| 55 | T&P of Substation (Rinch 1- set, plier 4 No., Meggar 1 No., Handgloves-4 Set, Discharge rod-2 set, Earth resistance tester - 1 set, etc.) | T&P of Substation (Rinch 1- set, plier 4 No., Meggar 1 No., Handgloves-4 Set, Discharge rod-2 set, Earth resistance tester - 1 set, etc.) |
| 56 | 33 KV LINE :- 9 Mtr. Long PCC Pole | 33 KV LINE :- 9 Mtr. Long PCC Pole |
| 57 | 13 Meter long STP (SP-70) | 13 Meter long STP (SP-70) |
| 58 | M+6 G.I. Tower 19.300 Mtr. Long (2500 KG Weight) | M+6 G.I. Tower 19.300 Mtr. Long (2500 KG Weight) |
| 59 | ACSR DOG CONDUCTOR (15.0 X 3 + 3% Sag and Jumpering) | ACSR DOG CONDUCTOR (15.0 X 3 + 3% Sag and Jumpering) |
| 60 | 33 KV XLPE Insulated Al. Cable 3 x 300 sq. mm. | 33 KV XLPE Insulated Al. Cable 3 x 300 sq. mm. |
| 61 | Polymeric 33 KV Pin Insulators | Polymeric 33 KV Pin Insulators |
| 62 | 33 KV Disc Fitting B & S Type – 70 KN | 33 KV Disc Fitting B & S Type – 70 KN |
| 63 | 33 KV Polymeric Disc Insulators B&S Type 70 KN | 33 KV Polymeric Disc Insulators B&S Type 70 KN |
| 64 | 33 KV 'V' Type X-arm | 33 KV 'V' Type X-arm |
| 65 | 33 KV Cross arm holding clamp with nuts, bolts & washers (Galvanized) | 33 KV Cross arm holding clamp with nuts, bolts & washers (Galvanized) |
| 66 | \\" F \\" bracket for 33 KV line | \\" F \\" bracket for 33 KV line |
| 67 | \\" E \\" bracket for 33 KV line | \\" E \\" bracket for 33 KV line |
| 68 | Armour rod with ferrule for Dog conductor | Armour rod with ferrule for Dog conductor |
| 69 | Angle 65x65x6 mm, 4300 mm long for bracing with clamps (Galvanized) | Angle 65x65x6 mm, 4300 mm long for bracing with clamps (Galvanized) |
| 70 | Top Channel 125x65 mm, 3200 mm long with 2 nos clamps (Galvanized) | Top Channel 125x65 mm, 3200 mm long with 2 nos clamps (Galvanized) |
| 71 | Droper Channel 100x50 mm, 3000 mm long with 2 nos clamps (Galvanized) | Droper Channel 100x50 mm, 3000 mm long with 2 nos clamps (Galvanized) |
| 72 | P.G. clamps for Reccoon/Dog | P.G. clamps for Reccoon/Dog |
| 73 | Nut, bolt with washer (Galvanized) | Nut, bolt with washer (Galvanized) |
| 74 | Guarding Angle 65x65x6x2600 mm (Galvanized) | Guarding Angle 65x65x6x2600 mm (Galvanized) |
| 75 | Guarding Angle 65x65x6x3600 mm (Galvanized) | Guarding Angle 65x65x6x3600 mm (Galvanized) |
| 76 | Holding clamp for guarding angle with nuts & bolts (Galvanized) | Holding clamp for guarding angle with nuts & bolts (Galvanized) |
| 77 | G.I. Barbed wire | G.I. Barbed wire |
| 78 | G.I. Wire No. 6 SWG | G.I. Wire No. 6 SWG |
| 79 | G.I. Wire No. 8 SWG | G.I. Wire No. 8 SWG |
| 80 | G.I. Wire No. 16 SWG | G.I. Wire No. 16 SWG |
| 81 | Stone Pad (300x300x75 mm.) | Stone Pad (300x300x75 mm.) |
| 82 | 33 KV Number plate with clamp with nuts, & bolts | 33 KV Number plate with clamp with nuts, & bolts |
| 83 | 33 KV Danger board with clamp with nuts, & bolts | 33 KV Danger board with clamp with nuts, & bolts |
| 84 | Alluminium binding wire- 6 SWG | Alluminium binding wire- 6 SWG |
| 85 | Alluminium paint | Alluminium paint |
| 86 | Red oxide paint | Red oxide paint |
| 87 | Turn Buckle | Turn Buckle |
| 88 | Eye bolt 12 x 110 mm (Galvanized) | Eye bolt 12 x 110 mm (Galvanized) |
| 89 | 33 KV Heat Shrinkable Jointing Kit Outdoor Type for 33 KV, 3x300 Sq. mm. XLPE Cable | 33 KV Heat Shrinkable Jointing Kit Outdoor Type for 33 KV, 3x300 Sq. mm. XLPE Cable |
| 90 | Clamps for fixing of cable and cable box (Galvanized) | Clamps for fixing of cable and cable box (Galvanized) |
| 91 | Supply of HDPE Pipe PN-6, 160mm dia Pipe for laying of 33KV, 3x300Sq.mm | Supply of HDPE Pipe PN-6, 160mm dia Pipe for laying of 33KV, 3x300Sq.mm |
| 92 | Clamps for holding of H.D.P.E. Pipe (Galvanized) | Clamps for holding of H.D.P.E. Pipe (Galvanized) |
| 93 | Earthing of Pole by Earthing Rod of 20 x2500 mm and 6 SWG earthing wire etc. | Earthing of Pole by Earthing Rod of 20 x2500 mm and 6 SWG earthing wire etc. |
| 94 | Stay Complete (Stay rod 20x1800 mm, Stay Insulator, Stay wire 7/8 SWG and Stay clamp, concreting, Nut, bolt with washer) | Stay Complete (Stay rod 20x1800 mm, Stay Insulator, Stay wire 7/8 SWG and Stay clamp, concreting, Nut, bolt with washer) |
| 95 | Grouting of P.C.C. Pole 9.0 Mtr. long | Grouting of P.C.C. Pole 9.0 Mtr. long |
| 96 | Concreting of S.T. Pole 13.0 Mtr. long | Concreting of S.T. Pole 13.0 Mtr. long |
| 97 | Concreting of Tower with M-20 Grade concrete for foundation with shuttering and making of plinth | Concreting of Tower with M-20 Grade concrete for foundation with shuttering and making of plinth |
| 98 | Tree cutting compensation | Tree cutting compensation |
| 99 | Digging of trench and Laying of 3x300 sq.mm. cable below ground level as per Resspo norms/site requirement by open trench Method, back filling of earth, ramming and dressing properly complete Job | Digging of trench and Laying of 3x300 sq.mm. cable below ground level as per Resspo norms/site requirement by open trench Method, back filling of earth, ramming and dressing properly complete Job |
| 100 | Digging of trench and Laying of 3x300 sq.mm. cable in H.D.P.E Pipe PN-6, 160mm dia below ground level as per Resspo norms/site requirement by open trench Method, back filling of earth, ramming and dressing properly complete Job | Digging of trench and Laying of 3x300 sq.mm. cable in H.D.P.E Pipe PN-6, 160mm dia below ground level as per Resspo norms/site requirement by open trench Method, back filling of earth, ramming and dressing properly complete Job |
| 101 | Digging of Trench by excavation of earth laying of brick on both side, filling of sand, laying of cable put the sand & brick on cable & earth ramming and dressing properly with complete job for laying 33 KV XLPE cables of sizes 3x300 Sq.mm. including cost of bricks, sand, clamps etc. | Digging of Trench by excavation of earth laying of brick on both side, filling of sand, laying of cable put the sand & brick on cable & earth ramming and dressing properly with complete job for laying 33 KV XLPE cables of sizes 3x300 Sq.mm. including cost of bricks, sand, clamps etc. |
| 102 | Laying of H.D.P.E. Pipe underground below the Railway Track/Highway/Road or as per drawing approved by Railway/Highway/Road by HDD Method along with laying of 33 KV, 3x300 Sq. mm. XLPE Cable in H.D.P.E. Pipe | Laying of H.D.P.E. Pipe underground below the Railway Track/Highway/Road or as per drawing approved by Railway/Highway/Road by HDD Method along with laying of 33 KV, 3x300 Sq. mm. XLPE Cable in H.D.P.E. Pipe |
| 103 | Laying of 33 KV, 3x300 sq.mm. XLPE Cable underground in trunches. | Laying of 33 KV, 3x300 sq.mm. XLPE Cable underground in trunches. |
| 104 | Laying of 33 KV, 3x300 XLPE Cable with H.D.P.E. Pipe on Double Pole Structure | Laying of 33 KV, 3x300 XLPE Cable with H.D.P.E. Pipe on Double Pole Structure |
| 105 | Laying of 33 KV, 3x300 XLPE Cable in Air on Double Pole Structure & filling of cable joint kit with proper dressing. | Laying of 33 KV, 3x300 XLPE Cable in Air on Double Pole Structure & filling of cable joint kit with proper dressing. |
| 106 | Road Restoration Charge (Kachha Road) | Road Restoration Charge (Kachha Road) |
| 107 | Road Restoration Charge (Pakka Road) | Road Restoration Charge (Pakka Road) |
| 108 | Cable Route Marker | Cable Route Marker |
| 109 | Shifting of old conductor and accessories on new line | Shifting of old conductor and accessories on new line |
| 110 | 11 KV LINE :- 8.5 Mtr. Long PCC Pole | 11 KV LINE :- 8.5 Mtr. Long PCC Pole |
| 111 | 11 Mtr. Long STP Pole (SP-55) | 11 Mtr. Long STP Pole (SP-55) |
| 112 | 13 Mtr. Long STP Pole (SP-72) | 13 Mtr. Long STP Pole (SP-72) |
| 113 | ACSR DOG CONDUCTOR (0.232x3+3% Sag and Jumpering + 0.0x6+3% Sag and Jumpering) | ACSR DOG CONDUCTOR (0.232x3+3% Sag and Jumpering + 0.0x6+3% Sag and Jumpering) |
| 114 | 11 KV 3 Core Al. XLPE Insulated 3x185 Sq.mm Cable | 11 KV 3 Core Al. XLPE Insulated 3x185 Sq.mm Cable |
| 115 | LT XLPE Cable of size 3.5x70 sqmm. | LT XLPE Cable of size 3.5x70 sqmm. |
| 116 | 11 KV TPMO with fixing clamp complete | 11 KV TPMO with fixing clamp complete |
| 117 | 11 KV Fuse set | 11 KV Fuse set |
| 118 | 11 KV Disc fitting B&S Type 45 KN | 11 KV Disc fitting B&S Type 45 KN |
| 119 | Polymeric 11 KV Pin Insulator | Polymeric 11 KV Pin Insulator |
| 120 | 11 KV Polymeric Disc Insulator B&S type (45 KN) | 11 KV Polymeric Disc Insulator B&S type (45 KN) |
| 121 | Top Channe 100x50x6mm, 2240mm with clamp, bolts ,nuts & washers (Galvanized) | Top Channe 100x50x6mm, 2240mm with clamp, bolts ,nuts & washers (Galvanized) |
| 122 | Dropper Channel 100x50x6mm, 2028mm Long with clamp, bolts ,nuts & washers ( For Fuse set) (Galvanized) | Dropper Channel 100x50x6mm, 2028mm Long with clamp, bolts ,nuts & washers ( For Fuse set) (Galvanized) |
| 123 | 11 KV V-Type X-arm | 11 KV V-Type X-arm |
| 124 | Angle Iron 65x65x6mm, 2700mm Long bracing Complete with Clamps (Galvanized) | Angle Iron 65x65x6mm, 2700mm Long bracing Complete with Clamps (Galvanized) |
| 125 | Angle 65x65x6mm, 2028mm Long for G.I. Pipe [email protected] Kg./M (Galvanized) | Angle 65x65x6mm, 2028mm Long for G.I. Pipe [email protected] Kg./M (Galvanized) |
| 126 | Guarding Angle 65x65x6x2600 mm (Galvanized) | Guarding Angle 65x65x6x2600 mm (Galvanized) |
| 127 | Holding clamp for guarding angle with nuts & bolts (Galvanized) | Holding clamp for guarding angle with nuts & bolts (Galvanized) |
| 128 | F-Bracket with Bolt & Nuts 11KV Line | F-Bracket with Bolt & Nuts 11KV Line |
| 129 | Clamp for fixing X-arm with Nuts & Bolts (Galvanized) | Clamp for fixing X-arm with Nuts & Bolts (Galvanized) |
| 130 | Holding Clamp with nuts & bolts (Galvanized) | Holding Clamp with nuts & bolts (Galvanized) |
| 131 | Painting number mark with paint | Painting number mark with paint |
| 132 | 11 KV Danger Board with Nut & Bolt | 11 KV Danger Board with Nut & Bolt |
| 133 | PG clamps | PG clamps |
| 134 | GI Wire 8 Nos. | GI Wire 8 Nos. |
| 135 | GI Wire 10 SWG. | GI Wire 10 SWG. |
| 136 | G.I. Wire No. 16 SWG | G.I. Wire No. 16 SWG |
| 137 | GI Barbed Wire | GI Barbed Wire |
| 138 | Stone Pad (300x300x75mm) | Stone Pad (300x300x75mm) |
| 139 | Al. Binding wire -6 SWG | Al. Binding wire -6 SWG |
| 140 | Supply of HDPE Pipe 140mm dia | Supply of HDPE Pipe 140mm dia |
| 141 | Clamps for holding of HDPE Pipe (Galvanized) | Clamps for holding of HDPE Pipe (Galvanized) |
| 142 | Eye Bolt (Galvanized) | Eye Bolt (Galvanized) |
| 143 | Turn Buckle (Galvanized) | Turn Buckle (Galvanized) |
| 144 | Alluminum. Paint | Alluminum. Paint |
| 145 | Red Oxide Paint | Red Oxide Paint |
| 146 | 11 KV Heat Shrinkable cable boxes for 11 KV Cable XLPE 3 x 185 Sq mm | 11 KV Heat Shrinkable cable boxes for 11 KV Cable XLPE 3 x 185 Sq mm |
| 147 | Clamps for fixing of Cable and cable boxes (Galvanized) | Clamps for fixing of Cable and cable boxes (Galvanized) |
| 148 | Earthing of Pole by Earthing rod of 20x2500mm. & 6 SWG earthing wire etc. | Earthing of Pole by Earthing rod of 20x2500mm. & 6 SWG earthing wire etc. |
| 149 | Stay Complete (Stay Rod 16x1800mm, Stay Insulator, Stay wire 7/10 SWG and Stay clamp, concreting, Nut, bolt with washer) | Stay Complete (Stay Rod 16x1800mm, Stay Insulator, Stay wire 7/10 SWG and Stay clamp, concreting, Nut, bolt with washer) |
| 150 | Concreting of Supports (8.5 Mtr. PCC) | Concreting of Supports (8.5 Mtr. PCC) |
| 151 | Concreting of Supports (11 Mtr. STP) | Concreting of Supports (11 Mtr. STP) |
| 152 | Concreting of Supports (13 Mtr. STP) | Concreting of Supports (13 Mtr. STP) |
| 153 | Digging of trench and Laying of 3x185 sq.mm. cable below ground level as per Resspo norms/site requirement by open trench Method, back filling of earth, ramming and dressing properly complete Job | Digging of trench and Laying of 3x185 sq.mm. cable below ground level as per Resspo norms/site requirement by open trench Method, back filling of earth, ramming and dressing properly complete Job |
| 154 | Digging of trench and Laying of 3x185 sq.mm. cable in H.D.P.E Pipe below ground level as per Resspo norms/site requirement by open trench Method, back filling of earth, ramming and dressing properly complete Job | Digging of trench and Laying of 3x185 sq.mm. cable in H.D.P.E Pipe below ground level as per Resspo norms/site requirement by open trench Method, back filling of earth, ramming and dressing properly complete Job |
| 155 | Digging of Trench by excavation of earth laying of brick on both side, filling of sand, laying of cable put the sand & brick on cable & earth ramming and dressing properly with complete job for laying 11 KV XLPE cables of sizes 3x185 Sq.mm. including cost of bricks, sand, clamps etc. | Digging of Trench by excavation of earth laying of brick on both side, filling of sand, laying of cable put the sand & brick on cable & earth ramming and dressing properly with complete job for laying 11 KV XLPE cables of sizes 3x185 Sq.mm. including cost of bricks, sand, clamps etc. |
| 156 | Laying of H.D.P.E. Pipe underground below the Highway/Road or as per drawing approved by Highway/Road by HDD Method along with laying of 11 KV, 3x185 Sq. mm. XLPE Cable in H.D.P.E. Pipe | Laying of H.D.P.E. Pipe underground below the Highway/Road or as per drawing approved by Highway/Road by HDD Method along with laying of 11 KV, 3x185 Sq. mm. XLPE Cable in H.D.P.E. Pipe |
| 157 | Laying of 11 KV, 3x185 sq.mm. XLPE Cable underground in trunches. | Laying of 11 KV, 3x185 sq.mm. XLPE Cable underground in trunches. |
| 158 | Laying of 11 KV, 3x185 XLPE Cable with H.D.P.E. Pipe on Double Pole Structure | Laying of 11 KV, 3x185 XLPE Cable with H.D.P.E. Pipe on Double Pole Structure |
| 159 | Laying of 11 KV, 3x185 XLPE Cable in Air on Double Pole Structure & filling of cable joint kit with proper dressing. | Laying of 11 KV, 3x185 XLPE Cable in Air on Double Pole Structure & filling of cable joint kit with proper dressing. |
| 160 | Cable route marker | Cable route marker |
| 161 | Transformer earthing complete (chemical pipe earthing as per spe.) | Transformer earthing complete (chemical pipe earthing as per spe.) |
| 162 | 11 KV Lightening arrestor | 11 KV Lightening arrestor |
| 163 | Copper L-Piece 400x50x6 m.m. for LT bushing rod of T/F | Copper L-Piece 400x50x6 m.m. for LT bushing rod of T/F |
| 164 | Al. crimping lugs 35 sq.mm. | Al. crimping lugs 35 sq.mm. |
| 165 | Al. crimping lugs 50 sq.mm. | Al. crimping lugs 50 sq.mm. |
| 166 | Al. crimping lugs 70 sq.mm. | Al. crimping lugs 70 sq.mm. |
| 167 | Road Restoration Charge (Kachha Road) | Road Restoration Charge (Kachha Road) |
| 168 | Road Restoration Charge (Pakka Road) | Road Restoration Charge (Pakka Road) |
| 169 | GI Bolts ,Nuts & Washer | GI Bolts ,Nuts & Washer |
| 170 | GI LT Clamp with nuts & bolts for PCC Poles. | GI LT Clamp with nuts & bolts for PCC Poles. |
| 171 | 2x4 sq.mm. PVC armoured Cable | 2x4 sq.mm. PVC armoured Cable |
| 172 | D.P. Switch 63 A | D.P. Switch 63 A |
| 173 | Rest for DI Board, D.P. Switch 32A-1, D.P. Switch 16 A-1, Kit Kets-6 including wiring. | Rest for DI Board, D.P. Switch 32A-1, D.P. Switch 16 A-1, Kit Kets-6 including wiring. |
| 174 | LED light 100 Watt complete with fitting and accessories | LED light 100 Watt complete with fitting and accessories |
| 175 | 11 KV 3x185 sq.mm. Straight through | 11 KV 3x185 sq.mm. Straight through |
| 176 | Carriage of following material from Center Store to Site SUB-STATION PART:- 33 KV Line Isolator. | Carriage of following material from Center Store to Site SUB-STATION PART:- 33 KV Line Isolator. |
| 177 | 33 KV Bus Isolator. | 33 KV Bus Isolator. |
| 178 | 33 KV Lightening Arrestors | 33 KV Lightening Arrestors |
| 179 | 33 KV VCB 800A, 750MVA with Steel structure | 33 KV VCB 800A, 750MVA with Steel structure |
| 180 | Control panel I/C for 33 KV single T/F | Control panel I/C for 33 KV single T/F |
| 181 | Control panel I/C for 33 KV double T/F | Control panel I/C for 33 KV double T/F |
| 182 | 33 KV CT 400/200/1A | 33 KV CT 400/200/1A |
| 183 | 33 KV CT 200/1A | 33 KV CT 200/1A |
| 184 | 33 KV 1 Ph PT 33 KV/110 V | 33 KV 1 Ph PT 33 KV/110 V |
| 185 | 11 KV SWITCH GEARS VCB:- (i) Incoming VCB 600/300/5A, 350MVA, I /C | 11 KV SWITCH GEARS VCB:- (i) Incoming VCB 600/300/5A, 350MVA, I /C |
| 186 | (ii) Outgoing VCB 200/100/5A, 350MVA | (ii) Outgoing VCB 200/100/5A, 350MVA |
| 187 | (iii) 11 KV Bus coupler (1250A) | (iii) 11 KV Bus coupler (1250A) |
| 188 | 11KV 3 Core XLPE Cable:- (i) 3 × 300 Sq.mm | 11KV 3 Core XLPE Cable:- (i) 3 × 300 Sq.mm |
| 189 | (ii) 3 × 185 Sq.mm | (ii) 3 × 185 Sq.mm |
| 190 | 11KV Cable jointing kit. Heat Shrinkable:- (i) 300 Sq.mm Indoor | 11KV Cable jointing kit. Heat Shrinkable:- (i) 300 Sq.mm Indoor |
| 191 | (ii) 300 Sq.mm Outdoor | (ii) 300 Sq.mm Outdoor |
| 192 | (iii) 185 Sq.mm. Indoor | (iii) 185 Sq.mm. Indoor |
| 193 | (iv) 185 Sq.mm. Outdoor | (iv) 185 Sq.mm. Outdoor |
| 194 | 24 V Battery with Battery Charger and Cabinet. | 24 V Battery with Battery Charger and Cabinet. |
| 195 | 11/0.4 KV, 63 KVA Transformer. | 11/0.4 KV, 63 KVA Transformer. |
| 196 | 33 KV Fuse Set | 33 KV Fuse Set |
| 197 | 33 KV Polymeric Disc Insulators B&S Type 7000 Kg. for Main BusBar | 33 KV Polymeric Disc Insulators B&S Type 7000 Kg. for Main BusBar |
| 198 | Disc Fittings for Dog/Raccoon 7000 Kg. for Main BusBar | Disc Fittings for Dog/Raccoon 7000 Kg. for Main BusBar |
| 199 | CONDUCTOR A.C.S.R. Dog conductor for switch yard | CONDUCTOR A.C.S.R. Dog conductor for switch yard |
| 200 | Polymeric 33 KV Pin Insulator | Polymeric 33 KV Pin Insulator |
| 201 | 33 KV LINE :- 9 Mtr. Long PCC Pole | 33 KV LINE :- 9 Mtr. Long PCC Pole |
| 202 | 13 Meter long STP (SP-70) | 13 Meter long STP (SP-70) |
| 203 | ACSR DOG CONDUCTOR (15.0 X 3 + 3% Sag and Jumpering) | ACSR DOG CONDUCTOR (15.0 X 3 + 3% Sag and Jumpering) |
| 204 | 33 KV XLPE Insulated Al. Cable 3 x 300 sq. mm. | 33 KV XLPE Insulated Al. Cable 3 x 300 sq. mm. |
| 205 | Polymeric 33 KV Pin Insulators | Polymeric 33 KV Pin Insulators |
| 206 | 33 KV Disc Fitting B & S Type – 70 KN | 33 KV Disc Fitting B & S Type – 70 KN |
| 207 | 33 KV Polymeric Disc Insulators B&S Type 70 KN | 33 KV Polymeric Disc Insulators B&S Type 70 KN |
| 208 | 33 KV 'V' Type X-arm | 33 KV 'V' Type X-arm |
| 209 | 33 KV Heat Shrinkable Jointing Kit Outdoor Type for 33 KV, 3x300 Sq. mm. XLPE Cable | 33 KV Heat Shrinkable Jointing Kit Outdoor Type for 33 KV, 3x300 Sq. mm. XLPE Cable |
| 210 | Stay Complete (Stay rod 20x1800 mm, Stay Insulator, Stay wire 7/8 SWG and Stay clamp, concreting, Nut, bolt with washer) | Stay Complete (Stay rod 20x1800 mm, Stay Insulator, Stay wire 7/8 SWG and Stay clamp, concreting, Nut, bolt with washer) |
| 211 | 11 KV LINE :- 8.5 Mtr. Long PCC Pole | 11 KV LINE :- 8.5 Mtr. Long PCC Pole |
| 212 | 11 Mtr. Long STP Pole (SP-55) | 11 Mtr. Long STP Pole (SP-55) |
| 213 | 13 Mtr. Long STP Pole (SP-72) | 13 Mtr. Long STP Pole (SP-72) |
| 214 | ACSR DOG CONDUCTOR (0.232x3+3% Sag and Jumpering + 0.0x6+3% Sag and Jumpering) | ACSR DOG CONDUCTOR (0.232x3+3% Sag and Jumpering + 0.0x6+3% Sag and Jumpering) |
| 215 | 11 KV 3 Core Al. XLPE Insulated 3x185 Sq.mm Cable | 11 KV 3 Core Al. XLPE Insulated 3x185 Sq.mm Cable |
| 216 | LT XLPE Cable of size 3.5x70 sqmm. | LT XLPE Cable of size 3.5x70 sqmm. |
| 217 | 11 KV TPMO with fixing clamp complete | 11 KV TPMO with fixing clamp complete |
| 218 | 11 KV Fuse set | 11 KV Fuse set |
| 219 | 11 KV Disc fitting B&S Type 45 KN | 11 KV Disc fitting B&S Type 45 KN |
| 220 | Polymeric 11 KV Pin Insulator | Polymeric 11 KV Pin Insulator |
| 221 | 11 KV Polymeric Disc Insulator B&S type (45 KN) | 11 KV Polymeric Disc Insulator B&S type (45 KN) |
| 222 | 11 KV V-Type X-arm | 11 KV V-Type X-arm |
| 223 | 11 KV Heat Shrinkable cable boxes for 11 KV Cable XLPE 3 x 185 Sq mm | 11 KV Heat Shrinkable cable boxes for 11 KV Cable XLPE 3 x 185 Sq mm |
| 224 | 11 KV 3x185 sq.mm. Straight through | 11 KV 3x185 sq.mm. Straight through |
| 225 | Stay Complete (Stay Rod 16x1800mm, Stay Insulator, Stay wire 7/10 SWG and Stay clamp, concreting, Nut, bolt with washer) | Stay Complete (Stay Rod 16x1800mm, Stay Insulator, Stay wire 7/10 SWG and Stay clamp, concreting, Nut, bolt with washer) |
