|
| 1 | Contract Details |
| 2 | M&L for dismantling of plain or corrugated steel/FRP sheeting any guage, thickness, including Nainital or similar pattern roof covering complete all as spd and directed |
| 3 | M&L for 0.63mm thick galvanised corrugated mild steel sheeting with two corrugations side lap, fixed with coach screw and washer in roofs, walls etc with grade of zinc coating 275 all as spd and directed. |
| 4 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof / ridge/ covering/cladding to wall, fixed with self tapping screws as specified and directed by engg - in- charge. |
| 5 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet (except sheet) 0.50mm of an colour having tensile strength of 550Mpa as in roof/ ridge/ covering/cladding to wall, fixed with self tapping screws as specified and directed by engg - in- charge. |
| 6 | M&L for plain FRP sheet 2mm thick sheeting (Except sheeting) fixed with coach screw & washer or any other means as in roof, wall, doors, windows or any other location all as spd and directed |
| 7 | M&L for plain FRP sheet 2mm thick sheeting fixed with coach screw & washer or any other means as in roof, wall, doors, windows or any other location all as spd and directed |
| 8 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof / ridge/ covering/cladding to wall, fixed with self tapping screws as specified and directed by engg - in- charge. |
| 9 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubish off the premises. |
| 10 | M&L joint free non-skid coloured ceramic tiles 7 to 8 mm thick square /rectangular) area of each tile exceeding exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match as specified and directed. |
| 11 | M&L coloured glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match. |
| 12 | M&L joint free vitrified ceramic tiles light shade 10 mm thick square /rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match as specified and directed. |
| 13 | M&L screed bed or bedding layer of mortar 15mm thick for laying floor finish and on surface of wallls behind tiles in CM (1:6) as specifed and directed. |
| 14 | M&L for backing coat 10mm thick for laying skirting/dados and on surface of wallls behind tiles in CM (1:4) as specifed and directed. |
| 15 | Taking down chowkhat or frame without taking down shutter from the frame area n exc 1.50 sqm complete all as specfied and directed |
| 16 | M&L for Powder Coated aluminium frame for doors, windows, ventilators, aluminium flats & aluminium grill inc all fitting assecory required as per site condition, with one or more rebates includng joining cleats for fixing etc . Complete all as specifed and directed by engg-in -charge. |
| 17 | M&L for powder coated aluminium door shutter, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screw etc. complete all as specifed and directed by engg-in-charge. |
| 18 | S&F in repair Vitreous china wash down water closet pan (Pedestal pattern) white, inc spray Jet and seat cover all as specified and directed. |
| 19 | Taking down of cement or cement lime plaster/skirting/ dado of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc. |
| 20 | M&L applying 15 mm thick rendering in CM 1:4 on brick/ concrete surfaces of walls finished even and fair inc scaffolding as per requriment complete all as specified. |
| 21 | M&L applying 05 mm thick rendering in CM 1:3 on celling finished even and fair complete all as specified. |
| 22 | M&L for prepration of old surface of wall and distempering 1-coat with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/liter, of approved manufacturer of requried shade and colour complete all as spd and directed |
| 23 | M&L for prepration of new plastered surface than applying a coat of primer and two coat of acrylic smooth exterior paint of required shades inc scaffolding as per requriment all as spd and directed. |
| 24 | M&L for prepration of old surface inc complete removal of previous/existing treatment inc rubbing & washing down with water and carrying out petty repair and making the surface smooth for painting and than applying a coat of primer and two coat of acrylic smooth exterior paint of required shades inc scaffolding as per requriment all as spd and directed. |
| 25 | M&L for prepration of new plastered surface of celling and applying three coat of white wash complete all as spd and directed. |
| 26 | M&L for prepration of old surface of celling and applying one coat of white wash complete all as spd and directed. |
| 27 | M&L for preparation of old painted steel or iron surface inc steel gates, grills, trusses at any height, channels, griders,north light curves framing, welded mesh etc over 10cm in width or grith and applying one coat of synthetic enamel paint paint all as specifed and directed by engg in charge. |
| 28 | M&L for preparartion of old wodden surface of any description over 10cm width grith and applying one coats of Synthetic enamel paint as directed by engg-in-charge |
| 29 | S&F in repair plywood of thickness 6mm as in celling or at any location as directed by E-in-C, grade BWR type BB fixed with screw to frame work complete all as specified and directed. |
| 30 | M&L for preparartion of new wodden surface of any description over 10cm width grith and applying two coats of Synthetic enamel paint over a coat of pink primer all as specified and directed by engg-in-charge |
| 31 | S&F in repair for looking mirror of size 600 mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup screws complete all as specified and directed. make of mirror. |
| 32 | S&F in repairs CP angle valve 15mm bore cast copper alloy with crutch butterfly handle, screwed down and screwed for iron pipe or for brass ferrule and fixed as specified and directed. |
| 33 | “S&F in repair rotational moulded polyethylene water storage tank (cylinderical vertical with closed top) hoisted and fixed in position incl dismantling of existing tank of any description all as specified in SSR Part-I, 500 ltr capacity triple layer, including PTMT float valve 20mm bore dia complete all as specified and directed.” |
| 34 | S&F in repairs 15mm Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified. |
| 35 | S&F in repairs 20mm Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified. |
| 36 | Supply and fixed in repair PVC low level flushing cistern 10 Ltr capacity syphonic action type white as approved, ball valve float valve and handle incl bracket complete. |
| 37 | S&F in repairs CP bib tap long body 15mm bore cast copper alloy with crutch butterfly handle, chromium plated screwed down and screwed for iron pipe or for brass ferrule and fixed as specified and directed. |
| 38 | S&F in repair PVC connection fibre reinforced 300mm long with brass check nuts and PVC washers at both ends |
| 39 | S&F in repair brass CP WHB mixer for 15mm bore dia of pipe for mixing cold and hot water screwed down for iron pipe complete all as specified and directed. |
| 40 | S&F in repair harrison rails, MS chromium plated with fixing bracket complete all as specifed and directed |
| 41 | S&F in repair kitchen sinks made of stainless steel 1 mm thick with plugs, washers and waste including bedding in cement mortar over all size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm including waste coupling 40mm and waste pipe complete all as specified and directed. Nirali/Paryag ISI Marked. |
| 42 | S&F in repair PTMT grating of size 125mm complete all as spd and directed |
| 43 | S&F in reapir CP towel rail D type 20mm dia 600mm long of fixed with and inc chromium plated screw and wodden/ plastic cleats complete all as spd and directed |
| 44 | S&F in repair Aluminium (Extruded section) Door closer hydraulically regulated, designation No. 1 universal type, suitable for any door shutters up to 700mm width and of weight not more than 35kg |
| 45 | S&F in repair mild steel wire cloth, 0.63 mm nominal dia. of wire and avg width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire stples. |
| 46 | Taking up or down steel tubing and connection 15 mm bore pipe. |
| 47 | S&F tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 15 mm bore. |
| 48 | Taking up or down steel tubing and connection 20 mm bore pipe. |
| 49 | S&F tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 20 mm bore. |
| 50 | S&F in repair Pillar taps 15mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed |
| 51 | S&F in repair vitreous china wash hand basin, flat back, white size 550 x 400 mm incl bracket, & waste coupling 32 mm dia all as specified and directed by engg-in- charge. |
| 52 | Dismantling of wall or celling board any thickness inc grid (if requried) complete all as spd and directed. |
| 53 | S&F anodised aluminium snap grid frame work for false ceiling suspensi system size 605mm x 605mm complete all as specified and directed. |
| 54 | Supplied and fixed non asbesots textured designer ceiling board 4 mm thick of size 595x595mm fixing with screwes/ clips to Al framing in celling complete all as per manufacturares instructions and as directed |
| 55 | S&F in repair 20 mm bore valve of PTMT high pressure with epoxy coated Al rod and plastic ball screwed for iron pipe and fixed. |
| 56 | Note :-Tenderers may be noted that amount of credit will be deducted from the total amount arrived, at the time of Acceptance of contract. Please Enable Macros to View BoQ information |
