|
| 1 | Contract Details |
| 2 | Demolition of Cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed . |
| 3 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar. |
| 4 | M&L for 100 mm thick Cement Concrete type D-2 , 1:4:8 (40mm graded aggregate as in subbase complete all as specified and directed. |
| 5 | M&L for sand filling 50 mm thick under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 6 | S&F Machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 Grade (coloured), with grey cement and pigment , complete. |
| 7 | S&F Machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade (coloured), with grey cement and pigment complete. |
| 8 | M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set jointed and pointed in neat cement slurry in floors with grey cement and colour pigment including screed bed 15mm thick cement plaster 1:6 as specified and directed. |
| 9 | Demolition of Brickwork, P.C.C. blocks / stone/ boulder masonry built in cement mortar or cement lime mortar all as specified and directed. |
| 10 | M&L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete Type C1 1:3:6 (20mm graded aggregate )Set in cement mortar 1:6 all as specified and directed by Engr-in-Charge. |
| 11 | M & L brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius using old size bricks built in CM 1:4 complete all as specified and directed. |
| 12 | Taking down cement plaster on brick walls including. raking out joints, hacking for key, scrubbing down with water etc all asspecified and as directed. |
| 13 | M&L for Rendering 15 mm thick on fair faces of brick work or concrete surface using 1:4 cement plaster in walls etc.including finishing even & fair cement complete all as specified and directed by Engr-in-Charge. |
| 14 | M&L for Plain Cement concrete in foundations, filling and mass concrete type D-2 1:4:8(40mm graded aggregate) all as specified &directed. |
| 15 | M&L for Cement concrete type B-1 , 1:2:4 (20mm graded aggregate) in floor finish concrete surface even and smooth without using extra cement all as specified &directed. |
| 16 | M&L for Cement concrete Type B2 , 1:2:4 (40 mm graded aggregate in surface channels and drains making good as specified and directed. |
| 17 | Providing, cement concrete type B1 1:2:4(20 mm graded aggregate in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed and specified. |
| 18 | M&L for cement concrete(type C-2, 1:3:6) 100 mm thick in Sub Floors, Sub Bases, Floors Hardstanding pavings etc all as specified and directed by Engr-in-Charge. |
| 19 | Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for any work as directed and specified . |
| 20 | M&L for Reinforced cement concrete (nominal mix) in type B1 1:2:4 (20 MM graded aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and as directed and specified . |
| 21 | S&F Mild steel bars 6 to 8 mm dia TMT bar cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed |
| 22 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work not exceeding 200mm thick (Horizonta or sloping ) flat & fair finished complete. |
| 23 | Dismantling of wrought iron or mild steel work of any description not othewise provided for , as specified and directed. |
| 24 | S&F Mild steel in Framed work such as grills, gratings etc with ends of bar shouldered and /or riveted or forged into spikes, framed guard bars, barred iron doors, ladders,framed balusters, walk ways drain covers,railings framework for water tanks and similar work conforming to Fe.290 Gde-E-165 as specified and directed by Engr-in-Charge. |
| 25 | M&L for two coats of synthetic enamel paint over a coat of Red oxide primer on new Steel Surfaces width or girth exc 10cm including preperation of surfaces complete all as specified and directed. |
| 26 | Removing building materials etc. to a distance of 5km or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination |
| 27 | S&F in repair for factory made PCC kerb stone of size 300 x 460x150mm , laid in position to the required line, level and curvature, jointed with cement mortor 1:3 including making the joint with or without grooves including making drainage opening where ever required comlete all as per direction of Engineer-in-charge. |
| 28 | M&L for two coats of synthetic enamel paint over a coat of primerr on new concretel Surfaces width or girth exc 10cm including preperation of surfaces complete all as specified and directed. |
| 29 | Note :-Tenderers may be noted that amount of credit will be deducted from the total amount arrived, at the time of Acceptance of contract. Please Enable Macros to View BoQ information |
