|
| 1 | Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth and getting out excavated material for laying/ taking out pipe line, cables, etc in soft/ loose soil complete all as specified and directed |
| 2 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in each layer in soft/ loose soil complete all as specified and directed |
| 3 | Removing excavated soils to a distance not exceeding 50 metres and depositing where directed at a level nexc. 1.5 metre above the starting point complete all as specified and directed. |
| 4 | Materials and labour for 100 mm thick PCC (1:3:6) type C2 using (40mm graded stone aggregate) as in , road PCC or any other works required on site requirement all as directed by Engr-in-Charge. |
| 5 | Materials and labour for boring holes 1mtr deep in soil under roads/PCC as directed for cable passing through pipes of required size and disposal of soil to a distance not exc. 50m. (Note: Connected items like Pipes is measured and paid seperately under relevant items). |
| 6 | Taking up or down from any position existing GI/DI/steel water tubing 40 mm bore of any type and connections carefully including cleaning for refixing or removal to E/M store yard or issued as credit complete all as specified and as directed.Note :Excavation/earth work shall be measured and paid separately under respective item of schedule considered here-in-before. |
| 7 | All same as item No. 06 above but 50 mm bore. |
| 8 | All same as item No. 06 above but 80 mm bore. |
| 9 | All same as item No. 06 above but 100 mm bore. |
| 10 | All same as item No. 06 above but 150 mm bore. |
| 11 | Relaying/refixing of old serviceable GI/DI/steel water tubing as obtained from item No. 6 to 10 here-in-before, jointing and testing in new or existing position including all new fittings, ISI Marked, such as bends, elbow, tee, reducers, sockets, unions, flange etc as required, laid in trenches or fixed to wall/cellinng or floors including making holes in wall where required complete all as specified and directed by Engr-in-charge for 40 mm bore pipes. |
| 12 | All same as item No. 11 above but 50 mm bore. |
| 13 | All same as item No. 11 above but 80 mm bore. |
| 14 | All same as item No. 11 above but 100 mm bore. |
| 15 | All same as item No. 11 above but 150 mm bore. |
| 16 | Supply, laying, jointing & testing 40 mm bore galvanised iron tubing medium grade with all fittings such as bends, elbow, tee, socket, reducers, unions etc as required at site laid in trenches complete all as specified and directed. |
| 17 | All same as item No. 16 above but 50 mm bore. |
| 18 | All same as item No. 16 above but 80 mm bore. |
| 19 | All same as item No. 16 above but 100 mm bore. |
| 20 | Supply and fixing in repair gun metal gate/globe valve, 50 mm bore, ISI Marked, with iron wheel headed screwed both ends for pipe including taking down unserviceable complete all as specified and as directed. |
| 21 | All same as item No. 20 above but 40 mm bore. |
| 22 | Supply and fixing PP-R (Polypropylene random co-polymer) 90 mm outer dia pipe, 3-layer (outer green coloured UV stablilized, middle black coloured UV stabilized and innermost layer white coloured with anti-microbial property), as per IS-15801, fusion welded, grade PN-16 SDR-7.4 having thermal stability for hot & cold water supply with and including socket fittings, laid in trenches/walls complete all as specified and as directed.(Note: (i) Contractor shall submit 7 Years warranty certificate from the manufacturer of any manufacturing defect and leakage through the pipeline. (ii) If there is any technical problem regarding PP-R product,contractor shall provide support within 2 Days. |
| 23 | All same as item No. 22 above but 63 mm outer dia. |
| 24 | All same as item No. 22 above but 50 mm outer dia. |
| 25 | Supply and fixing in repair PP-R Gate valves (brass insert), for 90 mm outer dia pipe, as per requirement of the site including taking down unserviceable valves complete all as specified and as directed of the following sizes:- |
| 26 | All same as item No. 25 above but 63 mm outer dia. |
| 27 | All same as item No. 25 above but 50 mm outer dia. |
| 28 | Supply, laying and testing ductile iron (DI) pressure pipe with spigot and socket end, class K-7, confirming to IS-8329/2000, suitable for push - on rubber gasket jointing with centrifugally applied inside cement mortar lining with portland cement and metallic zinc coationg and finishing layer of black bitumen coating on external surface of size 150 mm dia duly ISI marked including gaskets for fixing socket joint and other conneting acessories to laid in trenches etc complete all as specified and directed. |
| 29 | Supply, laying and testing ductile iron (DI) pressure pipe with spigot and socket end, class K-7, confirming to IS-8329/2000, suitable for push - on rubber gasket jointing with centrifugally applied inside cement mortar lining with portland cement and metallic zinc coationg and finishing layer of black bitumen coating on external surface of size 100 mm dia duly ISI marked including gaskets for fixing socket joint and other conneting acessories to laid in trenches etc complete all as specified and directed. |
| 30 | Supply, laying and testing ductile iron (DI) pressure pipe with spigot and socket end, class K-7, confirming to IS-8329/2000, suitable for push - on rubber gasket jointing with centrifugally applied inside cement mortar lining with portland cement and metallic zinc coationg and finishing layer of black bitumen coating on external surface of size 80 mm dia duly ISI marked including gaskets for fixing socket joint and other conneting acessories to laid in trenches etc complete all as specified and directed. |
| 31 | Supply, fixing and testing DI fittings for spigot & socketed or flanged pipes i.e. bends, reducers, tail pieces, tapers, tees, collars, caps, plugs with MS plate, nuts, bolts, washers gaskets etc of sizes 100mm to 350mm dia including taking out Unserviceable complete all as specified and directed . |
| 32 | Material and labour for repair of leakage of GI/ PPR/U-PVC/DI/CI pipeline as and when directed of any bore including cutting the pipe line in any position and insertion of new fittings like sockets, tees, reducers, bends as required at site or welding, threding of suitable size all as directed by Engineer-in-charge :-Note: (a) Material required on ground shall be paid and measured separately.(b) The excavation work required on the ground shall be paid and measured separately. |
| 33 | Supply only GI socket/elbow/tee of size 50 mm bore. |
| 34 | Supply only GI socket/elbow/tee of size 40 mm bore. |
| 35 | Supply only U-PVC socket/elbow/tee of size 50 mm bore. |
| 36 | Supply only U-PVC socket/elbow/tee of size 40 mm bore. |
| 37 | Supply only GI union of size 50 mm bore. |
| 38 | Supply only GI union of size 40 mm bore. |
| 39 | Supply only U-PVC union of size 50 mm bore. |
| 40 | Supply only U-PVC union of size 40 mm bore. |
| 41 | Supply only GI Nipple of size 50 mm bore. |
| 42 | Supply only GI Nipple of size 40 mm bore. |
| 43 | Supply only U-PVC Nipple of size 50 mm bore. |
| 44 | Supply only U-PVC Nipple of size 40 mm bore. |
| 45 | Supply only GI/UPVC reducer socket of size 50 x 40 mm bore. |
| 46 | Supply only GI/UPVC reducer socket of size 50 x 25mm bore. |
| 47 | Supply and fixing sluice valve 150mm dia, PN 1.6 with Stainless steel spindle nuts, bolts, washers and rubber gasket sheet for packing including taking out existing unserviceable sluice valve fixed at any position all as specified and directed by Engr-in-Charge |
| 48 | Supply and fixing sluice valve 100mm dia, PN 1.6 with Stainless steel spindle nuts, bolts, washers and rubber gasket sheet for packing including taking out existing unserviceable sluice valve fixed at any position all as specified and directed by Engr-in-Charge |
| 49 | Supply and fixing sluice valve 80mm dia, PN 1.6 with Stainless steel spindle nuts, bolts, washers and rubber gasket sheet for packing including taking out existing unserviceable sluice valve fixed at any position all as specified and directed by Engr-in-Charge |
| 50 | Supply and fixing metallic spindle suitable for 80 mm to 150 mm dia sluice valve including lock nut and connecting accessories complete all as specified and as directed. |
| 51 | Supply and fixing Butterfly valve 100mm dia, with nuts, bolts, washers and rubber gasket sheet for packing including taking out existing unserviceable sluice valve fixed at any position all as specified and directed by Engr-in-Charge |
| 52 | Supply and fixing Butterfly valve 80mm dia, with nuts, bolts, washers and rubber gasket sheet for packing including taking out existing unserviceable sluice valve fixed at any position all as specified and directed by Engr-in-Charge |
| 53 | Supply and fixing mechanical joint of size 150 mm bore complete all as specified and directed. |
| 54 | Supply and fixing mechanical joint of size 100 mm bore complete all as specified and directed. |
| 55 | Supply and fixing mechanical joint of size 80 mm bore complete all as specified and directed. |
| 56 | Supply only OT solution for chlorine test in each bottle of 500 ml complete all as specified and as directed. |
| 57 | Supply only chlorine test kit with coloured specimen for different rangend OT solution in refined finish box complete all as specified and as directed. |
| 58 | Supply and fixing 3 phase Digital panel volt Meter Flush Mounting 96x96mm, Accuracy Class-I, input voltage measurement range 17-520V AC (P-P), including taking out unserviceable complete all as specified and as directed. |
| 59 | Supply and fixing 3 phase 5A, Digital panel ammeter Flush Mounting 96x96mm, Accuracy Class-I, CT/PT Site programmable including taking down existing unserviceable one complete all as specified and as directed. |
| 60 | Supply and fixing 3 phase indicator lamp including taking down existing set complete all as specified and as directed by Engr-in-Charge |
| 61 | Material and labour for construction of valve chamber of sizes 1200mm x 1200mm x1200mm (internnal dimensions) with MS sheet cover 3mm thick with angle iron frame of size 50 x 50 x 6mm and locking arrangements including excvation and earth work in any type of soil,PCC (1:4:8) type D2 in foundation ,PCC benching 1:2;4 type B-1 ,PCC (1:5:8) block masonry 20 cm thick in cement mortor (1:6),10 mm thick plastering in CM 1:4 ,PCC bed in (1:3:6) and coping 50mm hick in cement concrete 1:2:4 type B1 using 20mm stone aggregate including necessary formwork, painting one coat of red oxide and two coats of bituminious black paint on all steel surfaces as specified and as directed including demolition of existing valve chamber,complete all as specified and as directed. |
| 62 | Material and labour for construction of valve chamber of sizes 900mm x 900mm x900mm (internnal dimensions) with MS sheet cover 3mm thick with angle iron frame of size 50 x 50 x 6mm and locking arrangements including excvation and earth work in any type of soil,PCC (1:4:8) type D2 in foundation ,PCC benching 1:2;4 type B-1 ,PCC (1:5:8) block masonry 20 cm thick in cement mortor (1:6),10 mm thick plastering in CM 1:4 ,PCC bed in (1:3:6) and coping 50mm hick in cement concrete 1:2:4 type B1 using 20mm stone aggregate including necessary formwork, painting one coat of red oxide and two coats of bituminious black paint on all steel surfaces as specified and as directed including demolition of existing valve chamber,complete all as specified and as directed. |
| 63 | Material and labour for construction of valve chamber of sizes 600mm x 600mm x600mm (internnal dimensions) with MS sheet cover 3mm thick with angle iron frame of size 50 x 50 x 6mm and locking arrangements including excvation and earth work in any type of soil,PCC (1:4:8) type D2 in foundation ,PCC benching 1:2;4 type B-1 ,PCC (1:5:8) block masonry 20 cm thick in cement mortor (1:6),10 mm thick plastering in CM 1:4 ,PCC bed in (1:3:6) and coping 50mm hick in cement concrete 1:2:4 type B1 using 20mm stone aggregate including necessary formwork, painting one coat of red oxide and two coats of bituminious black paint on all steel surfaces as specified and as directed including demolition of existing valve chamber,complete all as specified and as directed. |
| 64 | Material and labour for fabrication of new Valve chamber cover made up of 4 mm thick MS sheet with hooks and handles of existing size including fixing of cover of the valve chamber on the channel including one coat primer followed by one coat of black bituminous paint complete all as specified and as directed. |
| 65 | Material and labour for painting of Valve chamber cover made up of MS sheet of any size by surface preparation using emery paper followed by one coat of primer and one coat of black syntheic enemel paint complete all as directed by engineer-in-charge. |
| 66 | Material and labour for 15 mm thick rendering in cement mortar (1:4), to fair faces of brick or concerete wall of valve chambers, finished even and smooth without using extra cement complete all as specified and as directed by engineer-in-charge. |
| 67 | Materials and labour for taking up/lifting of submersible motor and pump assembly complete of any type/size upto 15 HP with unserviceable cable of any make and capacity from deep tube/bore well (of any depth) after providing lifting tools and tackles complete as required at site, carefully disconnecting of all electric connections, water connections in and including dismantling of column pipe lines shaft (of any size and length stage by stage) and keeping them aside under safe custody for reuse at site complete all as specified and directed by Engr-in-charge |
| 68 | Materials and labour for lowering of repaired submersible motor and pump assembly complete of any type/size upto 15HP capacity with submersible cable of any make and size complete in deep tube/bore well of any depth coupling with pump and motor, in and including connecting and lowering of old or new column pipe line shaft of any size and length (stage by stage) carefully with the help of necessary tools and tackles, reconnecting of all electric and water connections with new nuts bolts washers and rubber gasket and testing on load upto the entire satisfaction of Engr-in-charge complete all as specified and directed.Note: Column pipe if required will be measured and paid under relevant supply only item. |
| 69 | Materials and labour for transportation of defective submersible pump 5 HP to 15HP capacity three phase set to workshop dismantling the same incl disconnecting electrical connections decoupling 440 volt AC submersible motor pump set , dismantling the motor,taking out burnt winding wire from the stator, cleaning of the casing and the stator with wire brush, rewinding of motor with superior quality copper winding wire of existing size including varnishing an drying, cable jointing and repair replacement of worn at parts of pump reassembling the same with motor installing the motor and pump , reconnecting all pipe and electric connections and testing on full load complete. Note: Spare parts replaced shall be measured & paid seperately under respective supply only item of schedule. Cost of rewiring and winding materials is included in item rate. |
| 70 | Materials and labour for transportation of defective submersible pump 1.5 HP to 3HP capacity three phase set to workshop dismantling the same incl disconnecting electrical connections decoupling 440 volt AC submersible motor pump set , dismantling the motor,taking out burnt winding wire from the stator, cleaning of the casing and the stator with wire brush, rewinding of motor with superior quality copper winding wire of existing size including varnishing an drying, cable jointing and repair replacement of worn at parts of pump reassembling the same with motor installing the motor and pump , reconnecting all pipe and electric connections and testing on full load complete. Note: Spare parts replaced shall be measured & paid seperately under respective supply only item of schedule. Cost of rewiring and winding materials is included in item rate. |
| 71 | Supply only following spare parts suitable for submersilble pump set vertical type (5 HP to 15 HP ) complete all as specified and as directed :- |
| 72 | Supply only Stainless Steel Impeller |
| 73 | Supply only thrust Bearing |
| 74 | Supply only thrust plate |
| 75 | Supply only Stainless Steel bush |
| 76 | Supply only sand guard |
| 77 | Supply only following spare parts suitable for submersilble pump set vertical type (1.5/3 HP ) complete all as specified and as directed :- |
| 78 | Supply only Stainless Steel Impeller |
| 79 | Supply only thrust Bearing |
| 80 | Supply only thrust plate |
| 81 | Supply only Stainless Steel bush |
| 82 | Supply only sand guard |
| 83 | Supply only column pipe 100mm dia GI pipe heavy grade, 3 meter in length & both ends long threaded, including provision of heavy duty coupling / socket dia 100 mm complete all as specified and directed |
| 84 | Supply only column pipe 80mm dia GI pipe heavy grade, 3 meter in length & both ends long threaded, including provision of heavy duty coupling / socket dia 80 mm complete all as specified and directed |
| 85 | Supply only chemical for drinking water treatment , calcium based granular high strength disinfectant chlorinating chemical having 65 % to 70 % chlorine content in granular form in a 45kg drum.. Brand should be from any manufacturer aproved by E-in-c's branch. |
| 86 | Supply and fixing flat submersible cable 3 core multi stranded copper conductor of size 6 sqmm. complete all as specified and as directed. |
| 87 | Supply and fixing flat submersible cable 3 core multi stranded copper conductor of size 10 sqmm. complete all as specified and as directed. |
| 88 | Cleaning/develpoment of borewell using conventional method by means of air compressor of suitable capacity of atleast 12 hours minimum until sand free mud free clean water obtained from the existing deep tubewell including taking up & down of submersible pump set with column pipe complete all as specified and as directed. Note: Quotated rates shall deemed to be inclusive cost of lifting and lowering of submersible pump alongwith coloum pipes. |
| 89 | Supply and fixing Low Intensity Aviation Obstruction Warning Light, 230v AC, Red, LED based, Day/Night Photocell Sensor, Flashing 20-60 FPM, Input Voltage: 230v AC. IP Rating: IP 65 As per Standard IS/IEC 60529: 2001Photocell auto On/Off (Internal fitted).Polycarbonate glass for 360 Degree Illumination fixing upto 20 mtr height RCC overhead water tank including fixing with PVC 3 core flexible copper wire complete all as specified and as directed. |
| 90 | Material and labour for Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers etc and connected to and including 25 X 4mm dia GI strip upto 7.5 m by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 40mm dia GI pipe connected to main control board and GI pipe medium grade 20mm bore for watering and including funnel, wire mesh, charcoal,salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including excavation and earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 complete all as specified and as directed.Note: The earth resistance value shall be less than 3 Ohm and test report shall be submitted to the department. Please Enable Macros to View BoQ information |
