|
| 1 | Chair all type- Recanning of chairs CBA/CBB wooden chair, bin soiled linen, chair easy, chair dinning, chair writing etc with 2mm wide new plastic cane and 0.4mm thick cream/white half round seat and back and border to be covered with 3 to 4 mm wide ½ round cane and tightening of frame before caning complete all as specified and shown in drawing. Tightning of all loose part of items meant for caning with help of Sikanza,screw, Bambo Nail(Guchchi) |
| 2 | Bed Plywood Top FD-213,245,246 & 247 - Removing of the following old broken/Unserviceable parts from Bed Plywood top and Supply and Fixing new parts made out of well seasoned Ist class hard wood Teak made to shape and size as per drg duly polished complete all as specified and shown on drg and as directed by Engineer-in-charge. . Removing of old U/S Existing ply wood top from Bed Ply Wood Top and S & F of new top 12 mm thick ply wood commercial face BWR Grade of same shape and size rest all as per Drg and as Directed by Engr-in-Charge, Tightning of all loose part of complete Bed Hard ply top with help of Sikanza,screw, Bambu Nail(Guchchi) |
| 3 | Removing of old U/S teak face ply wood 4 mm thick from Head Board and S & F new 4 mm thick one side teak face on both side of Head Board with 4 mm thick teak wood beading around the head board after repairing the complete head board. Rest all as per drg and as directed by Engr-in-Charge. |
| 4 | All as per item No 2.00 above But Foot board. |
| 5 | All as per item No. 2.00 above but Leg |
| 6 | All as per item No. 2.00 above Long rail |
| 7 | Chair Varandah (FD-333,19,256) Removing of Old/unsv cane from chair Verandah and Recanning of Chair Varandah mat pattern with 4 to 5 mm wide 0.5 mm thick half round new plastic cane white colour as specified in drg and directed by Engr-in-Charge |
| 8 | M&L for welding of broken frame of chair verandah as and where required as specified and directed by Engr-in-charge |
| 9 | Removing of old u/s missing hard PVC shoes to chair verandah and S&F new PVC hard shoes. |
| 10 | Bed hard Map : FD/E6/MAP/08(R) Removing the old unsv/broken existing plywood top from bed hard and S & F new Ply wood top of 12mm thick BWR grade commercial type , complete all as per existing shape and size as per drg. ISI Marked and directed by Engr-in-Charge. |
| 11 | Removing of Old brokne/unsv Stiffners and S & F New Stiffners of 25mmx25mm Ms sqr pipe of1.6mm wall thickness as per existing shape and size (Set of Four) welded between long rails duly painted with two coats of black enelamed paint over a coat of red oxide primer, complete all as per drg and as directed. |
| 12 | Removing of old broken unsv prelaminated particle board from Head and Foot and S & F with new exterior grade prelaminted particle board as per drawing and as directed. |
| 13 | Removing of Old broken/unsv PVC Shoes and S & F New PVC shoes as per existing shape and size as per drg and as directed by engineer in-charge. |
| 14 | Table Office Officer steel (FD-1003) Removing old u/s top of table office officer steel and S&F of new top of Pre laminated particle board 18 mm thick exterior grade both side laminated with 4mm thick teak wood beading duly polished around the top complete all as specified and directed. |
| 15 | Taking out U/S drawer of table office officer steel and S&F new drawer made of 1mm thick PBI sheet duly painted with two coats of OG synthetic enamel paint over a coat of red oxide primer paint ,rest all as per drg and directed by Engr –in-charge.. |
| 16 | Removing U\S / damaged legs and S & F New leg made 25mm sqre conduit pipe of 1.6mm wall thickness and painted with synthetic enameled paint OG rest all as per drg and directed by Engr-in-Charge |
| 17 | M & L for welding of Broken frame steel of Table Office Offrs Steel as specified in drg and as directed by Engr-in-Charge. |
| 18 | Providing broken /missing PVC legs shoes best quality to leg of table office officer steel rest all as per drg and directed by Engr-in-Charge. |
| 19 | Table office Clk steel- (FD-1004) Removing old u/s top of table office clk steel and S&F of new top of Pre laminated particle board 18/19 mm thick exterior grade both side laminated with 4mm thick teak wood beading duly polished around the top complete all as specified and directed. |
| 20 | Taking out U/S drawer of table office clk steel and S&F new drawer made of 1mm thick PBI sheet duly painted with two coats of OG synthetic enamel paint over a coat of red oxide primer paint ,rest all as per drg and directed by Engr –in-charge.. |
| 21 | Removing U\S / damaged legs and S & F New leg made 25mm sqre conduit pipe of 1.6mm wall thickness and painted with synthetic enameled paint OG over a coat of red oxide primer,rest all as per drg and directed by Engr-in-Charge |
| 22 | M & L for welding of Broken frame steel of Table Office clk Steel as specified in drg and as directed by Engr-in-Charge. |
| 23 | Providing broken /missing PVC legs shoes best quality to leg of table office officer steel rest all as per drg and directed by Engr-in-Charge. |
| 24 | Table Steel 3'X2' with &w/o drawer (FD-1007 & 1008) Taking out old U/S existing top from Table Steel 3'X2' with &w/o drawer and S&F of new top made of 18 mm thick Pre Laminated particle board exterior grade both side laminated with 4mm thick teak wood beading duly polished around the top complete all as specified and directed |
| 25 | Taking out U/S drawer of table 3'x2' steel with drawer and S&F new drawer made of 1mm thick PBI sheet duly painted with two coats of OG synthetic enamel paint over a coat of red oxide primer paint ,rest all as per drg and directed by Engr –in-charge.. |
| 26 | Removing U\S damaged legs and S & F New leg made 25mm sqre conduit pipe of 1.6mm wall thickness and painted with synthetic enameled paint OG over a coat of red oxide primer,rest all as per drg and directed by Engr-in-Charge |
| 27 | M & L for welding of Broken frame steel of Table 3'x2' Steel as specified in drg and as directed by Engr-in-Charge. |
| 28 | Removing of U/S PVC Leg Shoes of Table Steel 3'X2' with &w/o drawer and S&F of new PVC legs shoes of the same shape and size Rest all as per drg and directed by Engr-in-Charge |
| 29 | Chair CB Steel with Arms & W/O Arms (FD-75) S&F new seats of new teak wood duly painted and Canned with ½ round plastic cane 2mm wide 0.4mm thick and border with 3.5mm wide 0.5mm thick for chair CB steel with arms after removing existing damage/broken seat all as specified and as shown on drg. |
| 30 | S&F new back of new teak wood duly painted and Canned with ½ round plastic cane 2mm wide 0.4mm thick and border with 3.5mm wide 0.5mm thick for chair CB steel with arms after removing existing damage/broken back all as specified and as shown on drg. |
| 31 | S&F new mild steel cleats of size 50 X 25 X3mm in replacement of old U/S cleats by welding/screwing or as per directive by Engr-in charge to the frame complete of Chair CB steel with Arms duly painted with two coats of OG synthetic enamel paint over a coat of red oxide primer paint all as specified and as directed by Engr-in-Charge |
| 32 | Removing of old existing U/S cap and S&F new PVC cap for chair steel tumbler with arms. |
| 33 | Removing of U/S shoe and S&F new hard rubber shoes to chair steel tubler with arms with appropriate steel screw all as directed by Engr-in-Charge |
| 34 | Removing of old U/S arms and S&F new arms seasoned teak wood duly painted with steel screw appropriate size complete of Chair CB steel with Arms as specified and shown on drg all as directed by Engr-in-Charge |
| 35 | Teapoy Varandah (FD-255 & FD/E6/MAP/17) Taking out old U/S top of teapoy varandah and S& F New Top made of 18mm thick block board with lamination sheet of teak veneered shade both side laminated (one side white laminated) and 4mm thick teak wood beeding al round the top duly polished and repairing the entire frame including welding if required and painting two coats of white enamel paint after preparation of surface as specified in drg and directed by Engr-in-Charge |
| 36 | Table Computer (FD/E6/MAP/03)-M/L for removing UNSV parts from table computer and S&F new parts for the following items as per drg and specification and as directed by Engr-in-charge. M/L for removing UNSV top and S&F top made out of prelaminated particle board 19mm exterior grade of approved make beaded with PVC edging as per drg and specification and as directed by Engr-in-charge. |
| 37 | S&F drawer with telescopic channel. |
| 38 | S&F sliding board with telescopic channel. |
| 39 | S&F sides. |
| 40 | S&F PVC shoes. |
| 41 | Almira large steel/Med steel with shelves &1/2h &1/2s Fd-1031 & FD-1032 map drg Taking out existing unserviceable locks almirah large/medium steel and S&F of new locks of six leavers of existing shape & size with duplicate keys of complete all as specified and directed. |
| 42 | Taking out broken/damaged handle of steel almirah and S&F of new handle of mild steel chromium plated of existing shape complete all as specified and directed. |
| 43 | Taking down existing unserviceable shelves of almirah large steel and S&F of new shelves made of 1mm thick mild steel of existing shape and size,duly painted with two coats of OG synthetic enamel paint over a coat of red oxide primer paint complete all as specified on drawing and directed. |
| 44 | All as per item 44 here in before but shelves of almirah medium steel |
| 45 | Taking out old unserviceabledoor hinges from almirah large/medium steel and S&F of new doorhinges mild steel 75/80 mm long complete all as specified and directed. |
| 46 | Taking down unserviceable cover locks from almirah large/medium steel and S&F of new cover locks made of 1mm thick mild steel of existing shape and size complete all as specified on drawing and directed. |
| 47 | Taking down unserviceable three way locking device & rod set from almirah large steel and S&F of new three way locking device & rod set of existing shape and size complete all as specified on drawing and directed. |
| 48 | All as per item 48 here in before but three way locking device & rod set of almirah medium steel |
| 49 | Dismantling of unserviceable legs of almirah large steel and S&F of new made of 1mm thick mild steel sheet of existing shape and size,duly painted with two coats of OG synthetic enamel paint over a coat of red oxide primer paint complete all as specified on drawing and directed. |
| 50 | All as per item 50 here in before but legs of almirah medium steel. |
| 51 | Locker Steel (FD-1029, 257/ similar pattern): Removal of following existing unserviceable components of Locker Steel or similar MES pattern or similar items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including welding ,providing hinges, placing every part in-tactduly painted with two coats of OG synthetic enamel paint over a coat of red oxide primer paint to the disturbed portion, as applicable as per drgs or as directed by Engr in Charge. Handle |
| 52 | Hasp & Staple |
| 53 | Shelf |
| 54 | CP Hanging rod 19mm dia |
| 55 | Chair computer (TP) Taking out old UNSV seat and S&F New seat as per Drawing |
| 56 | Taking out old UNSV back and S& F New back as per Drawing |
| 57 | Taking out old UNSV Arms and S&F New Arms as per Drawing |
| 58 | Taking out old unsv Hydrolick system and S & F New Hydrolick systeam as per drg. |
| 59 | Taking out old UNSV Coaster wheel and S&F New coaster wheel as per Drawing |
| 60 | Chair revolving executive (TP)Taking out old UNSV seat and S&F New seat as per Drawing |
| 61 | Taking out old UNSV back and S& F New back as per Drawing |
| 62 | Taking out old UNSV Arms and S&F New Arms as per Drawing |
| 63 | Taking out old UNSV Coaster wheel and S&F New coaster wheel as per Drawing |
| 64 | Taking out old UNSV Hydrolic system and S&F New hydrolic system as per Drawing |
| 65 | Charpoy GI Pipe: (FD-220) Removing of old unserviceable elbow from charpoy GI pipe and S&F new GI three way elbow 32mm dia med grade ISI marked to charpoy GI pipe complete all as specified and directed |
| 66 | Removing of old unserviceable check nut from charpoy GI pipe and S&F new GI check nut 32 mm dia 10mm thick to long/ short rail of charpoy GI pipe complete all as specified and directed |
| 67 | S&F in replacement of U/S long rail of charpoy GI Pipe 32mm dia medium grade heavy duty threaded on both ends all as specified and shown on drg and as directed by Engr-in-Charge Make Jindel/Tata/Prakash Surya |
| 68 | Cutting of dismantled old long rail of charpoy GI Pipe 32mm dia modifying into short rail by threaded both ends and ends fixing the same to charpoy GI pipe all as pecified and as directed by the Engr-in-Charge. |
| 69 | Cutting of dismantled old short rail of charpoy GI Pipe 32mm dia and modifying into legs by threading of ends and M&L for welding the clamps for FMN set and fixing the same to charpoy GI pipe all as specified and as directed by the Engr-in-Charges. |
| 70 | S&F new three in Nos Iran flate size 4'x2''x6mm long to be fixed by drilling on Flate Iron and three whole on each long rail alongwith ply over it and crewed with nut and bolt duly black painted over a coat of red oxide steel primer for fixing by 6 mm dia 1 ½” long bolt of flat head with nut and washer as directive by directed by Engr-in-Charge. |
| 71 | Removing of old/unsv ply wood 12mm thick and S&F new ply wood 12mm commercial face BWR greade size 1980x900mm ISI Marked and directed by Engr-in-Charge. |
| 72 | Charpoy MS Tubing : FD/MAP-II/01 and CWE/TEZ/FD-04 Removing the old unsv/broken existing plywood top from Charpoy MS Tubuing and S & F new Ply wood top of 12mm thick BWR grade commercial type , complete all as per existing shape and size as per drg. ISI Marked and directed by Engr-in-Charge. |
| 73 | Removing of Old brokne/unsv Stiffners and S & F New Stiffners of 25mmx25mm Ms sqr pipe of1.6mm wall thickness as per existing shape and sise (Set of Four) welded between long rails duly painted with two coats of black enelamed paint over a coat of red oxide primer, complete all as per drg and as directed. |
| 74 | Removing of Old broken/unsv PVC Shoes and S & F New PVC shoes as per existing shape and size as per drg and as directed by engineer in-charge. |
| 75 | Painting M&L for preparation of old painting steel surfaces of any descripting exceeding 10cm width on girth inner side and outer side by cleaning with abrasive cloth, removing dirt, denting deparession if any, applying putty for smooth surfaces for painting and applying a coat of olive green / grey/black/white synthetic enamel paint on both side for glossy finish inside and outside complete all as specified and as directed at site. . Almirah Large Seel |
| 76 | Almirah Med Steel |
| 77 | Bed Hard steel |
| 78 | Book case steel with glass |
| 79 | Chair CB Steel with arms |
| 80 | Chair CB Steel without arms |
| 81 | Charpoy MS Tubing |
| 82 | Chair Verandah |
| 83 | Chair CB Steel Padded |
| 84 | Locker Steel |
| 85 | Side Rack with tray 3/4 space steel |
| 86 | Stool steel |
| 87 | Shoe Rack steel |
| 88 | Table 3'x2' with or without dr steel |
| 89 | Table Office Clk Steel |
| 90 | Table Offie Offrs steel |
| 91 | Teapoy Verandah |
| 92 | NOTES:1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. Please Enable Macros to View BoQ information |
