|
| 1 | Demolition of brick work/stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, PCC coping etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge. |
| 2 | Material and labour for brick work with sub class 'B' bricks, straight or curved on plan, exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge. |
| 3 | Taking down shutter carefully, area exceeding 1.0 sqm but not exceeding 2.0 sqm each including all fittings etc & removing clear off site after credit is recovered by Dept complete all as specified and as directed by Engineer-in-Charge |
| 4 | Taking down of chowkats or frames not exceeding 1.5sqm each with shutters (without taking off shutters from the frames) & removing clear off site after credit is recovered by Dept complete all as specified and as directed by Engineer-in-Charge |
| 5 | Taking down of chowkats or frames exceeding 1.5sqm but not exceeding 4.0sqm each with shutters (with out taking off shutters from the frames) & removing clear off site after credit is recovered by Dept complete all as specified and as directed by Engineer-in-Charge |
| 6 | Supply & Fix Factory made single extruded WPC (wood polymer composite) soild door/ window/ ceosetory windows & other frames/chowkhat of size 65 x 100mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with minter joints after applying PVC solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(face) and 1100 N(edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 n/mm2 and resisitance to spread of flame of class A catgory with property of being termite/borer proof water/moisture proof and fire resistant and fixed in position with MS hold fast/lugs/ SS dash fastners of required dia and length complete all as specified as directed by Engineer-in-charge. Note: M/S hold fast or SS dash fastners shall be paid for separately. Make: RAJSHRI / SINTEX / TUFFFLON / M/s Navratan Specialty Chemical LLP – ‘Brand : GIZA’ Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed. |
| 7 | Supply and fix factory made plain framed panelled shutter 35mm thick 2nd class hardwood rail and style (three panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and as directed by Engineer-in-Charge. Make : M/s Goel Brothers, Raipur / M/s Pioneer Timber, Chandigarh / M/s Goyal Industries, New Delhi / M/s Jain Doors pvt Ltd, Haryana / M/s India Wood & Wood Pdts, Mangalore / M/s MP Wood Products, Indore / M/s A1 Teak Products, Indore / M/s Jain Wood industries( Brand : JAYNA) |
| 8 | Supply and fix 35mm thick factory made 2nd class hard wood glazed and skelton shutter, open rebated, prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutter as specified in SSR Part-I section 8, clause No 8.24 (b) complete all as specified and as directed by Engineer-in-Charge. Make : M/s Goel Brothers, Raipur / M/s Pioneer Timber, Chandigarh / M/s Goyal Industries, New Delhi / M/s Jain Doors pvt Ltd, Haryana / M/s India Wood & Wood Pvts, Mangalore / M/s MP Wood Products, Indore / M/s A1 Teak Products, Indore / M/s Jain Wood industries( Brand : JAYNA) |
| 9 | Supply & Fiix Factory made single extruded WPC (wood polymer composite) soild decorative type flush door shutter of size 35mm thick comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) and having minimum density of 650 kg/cum, screw withdrawal strength of 1800 N(face) and 900 N(edge), minimum compressive strength of 50 N/mm2, modules of elasticity 850 n/mm2 and resisitance to spread of flame of class A catgory with property of being termite/borer proof water/moisture proof and fire resistant WPC to be laminated with pvc foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with SS butt hinges of required size with necessary full body threaded star headed counter sunk ss screws complete all as specified as directed by Engineer-in-charge. Note: SS butt hinges and SS screws shall be paid seprately. Make: RAJSHRI / SINTEX / TUFFFLON / M/s Navratan Specialty Chemical LLP – ‘Brand : GIZA’ |
| 10 | Material & Labour Factory made 30 mm thick solid wire mesh WPC (Wood Polymer Composite) door shutter consisting of Density 650 Kg/Cbm Manufactured by an ISO-9001-2015 certified Company. Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per 15:4020), The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm Complete as per direction of Engineer-in-charge.Make:RAJSHRI / SINTEX / TUFFFLON / M/s Navratan Specialty Chemical LLP – ‘Brand : GIZA’ |
| 11 | Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing on Serial Page No 151 & 180 of SSR Part II (pertaining to item No 08095) and edges to be painted to match with prelam sheet complete all as specified and as directed by Engr-in-Charge.Make : RAJSHRI / SINTEX / TUFFFLON / M/s Navratan Specialty Chemical LLP – ‘Brand : GIZA’ |
| 12 | Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of M. S. tubes for top & bottom rails. M.S. frame shall be covered with heat molded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at site as per specification & drawing on Serial Page No 149 & 176 of SSR Part II (pertaining to item No 08080) including necessary aluminium builders hardware for one door to be provided such as 100mm dia butt hinges - 3Nos, tower bolt 200mm dia - 2Nos, handle 200mm long - 2 Nos etc complete all as specified and as directed by Engineer-in-Charge.Make : RAJSHRI / SINTEX / TUFFFLON / M/s Navratan Specialty Chemical LLP – ‘Brand : GIZA’ |
| 13 | Material and labour for Prelaminated block board 18/19mm thick, grade II quality, interior grade, decorative type with decorative face veneer on both face, fixed with screws to timber frame complete all as specified and as directed by Engineer-in-Charge.Make: Greenply / Kitply / Century Plywood / Associates Decor Ltd |
| 14 | Supply and fix mild steel work as in hold fast & similar small articles, conforming to Fe-290 Gde-E-165 complete all as specified and as directed by Engineer-in-Charge. |
| 15 | Material and labour for plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, holstring courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, kerbs, water troughs, bed plates, concrete block for hold fast etc and the like including necessary form work for fair finished surfaces including weathering, slightly rounded or chamfered angles and throating, as directed etc complete all as specified and as directed by Engineer-in-Charge. |
| 16 | Supply and fix floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring 150mm size, complete all as specified and as directed.Make : Classic/ Shalimar/ CLIF/ARGET |
| 17 | Supply and fix Stainless steel butt hinges medium weight of size 100mm all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET |
| 18 | Supply and fix Hasp and staple, safety type, aluminium anodised including bolt to hinge plate of size 125mm complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET |
| 19 | Supply and fix aluminium anodised barrel tower bolt of extruded section size 150mm complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET |
| 20 | Supply and fix in extruded aluminium alloy handles fabricated types, anodised, of size 150 mm long complete all as specified and as directed by Engineer-in-Charge.Make : Classic/ Shalimar/ CLIF/ARGET |
| 21 | Supply and fix aluminium anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy 300mm long, ISI marked complete all as specified and as directed by Engineer-in-Charge.Make : Classic/ Shalimar/ CLIF/ARGET |
| 22 | Supply and fix 15 micron coloured aluminium powder coated sections for sliding (3 Track) or openable windows, ventilators, doors, partitions etc including fabrication of frame & shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc including all accessories such as glazing clips and rubber beadings for fixing glass panes / wire mesh in frame complete all as specified and as directed by Engineer-in-Charge.Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit IndiaNote:(i) Glass panes /wire mesh will be measured & paid separately. (ii) Rubber beading will not be weighed. |
| 23 | Supply and fix 15 micron coloured aluminium anodised grill of design No DG-101 of Decogrille or equivalent , cut to required size/shape, and fixed in position with and including aluminium beading and frame complete all as specified and as directed by Engineer-in-Charge. Make: DECOGRILLE of Associated group / Royal Alum grill Pvt Ltd or equivalent make as approved by GE |
| 24 | Demolition of stone slab and tiles of any description or thickness in floor, apron and vertical surfaces, laid dry or laid dry and pointed and & removing clear off site after credit is recovered by Dept complete all as specified and as directed by Engineer-in-Charge |
| 25 | Material and labour for granite (mushroom) , 20mm thick, machine cut (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platform, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of mushroom granite stone including grinding and polishing, over and including 15mm thick cement mortar (1:4) complete all as specified and as directed. |
| 26 | Material and labour for edge moulding to 20mm thick granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc complete all as specified and directed by Engr-in-Charge.. |
| 27 | Material and labour for machine cut, machine polished, green marble slab 18 to 20mm thick as in jambs and cills of windows etc , set, bedded and jointed with grey cement slurry & pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble slab laid over and including backing coat of 10mm thick in cement mortar (1:4) all as specified and as directed. |
| 28 | Material and labour for edge moulding to 18 to 20mm thick marble stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc complete all as specified and directed by Engr-in-Charge.. |
| 29 | Material and labour for preparing new wooden surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge.Make : Asian paints/ Nerolac paints/Berger paints/ Shalimar paints/ Dulux |
| 30 | Supply and fix 4.0mm thick glass, ordinary quality in square exceeding 0.5 Sqm in each pane, fixed in aluminium windows complete all as specified and as directed by Engineer-in-Charge.Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain |
| 31 | Supply and fix 4.0mm thick figured glass, pin headed type ordinary quality fixing with oil putty and glazing clip, in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge.Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain |
| 32 | Supply and fixaluminium anodisedl wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by Engineer-in-Charge |
| 33 | Supply and fix in repairs Harrison rails of 25mm, mild steel, chromium plated with and including fixing brackets, stops, rollers etc complete all as specified and directed by Engineer-in-Charge. |
| 34 | Material and labour for complete removal of existing treatment on wall surfaces and applying two coats of distemper oil emulsion with roller over a coat of alkali resistant wall primer including necessary formwork/ scaffolding /ladders and safety belt etc complete all as specified and as directed by Engineer-in-Charge.Make: M/s SHALIMAR / M/s BERGER / M/s NEROLAC /M/s ASIAN (Tractor Brand) |
| 35 | Material and labour for preparation of old plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge. |
| 36 | Material and labour for preparation of undecorated wall surfaces and applying 1.5mm wall care putty complete to smoothen the underneath surfaces complete all as specified and as directed by Engineer-in-Charge.Make: Asian Paints / Nerolac Paints /Jenson & Nicholson / Shalimar Paints / JK wall care putty |
| 37 | Material and labour for preparation of undecorated ceiling surfaces and applying 1.5mm wall care putty complete to smoothen the underneath surfaces complete all as specified and as directed by Engineer-in-Charge.Make: Asian Paints / Nerolac Paints /Jenson & Nicholson / Shalimar Paints / JK wall care putty |
| 38 | Taking down cement plaster of any description on brick or stone walls or in concrete surfaces as in drain etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and as directed by Engineer-in-Charge |
| 39 | Material and labour for 15 mm thick plastering in cement mortar (1:6) on brick/ concrete surface and finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 40 | Material and labour for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper with roller over a coat of alkali resistant wall primer complete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints |
| 41 | Material and labour for rendering 5mm thick plaster in cement mortar (1:3) on concrete surfaces of ceiling and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 42 | Material and labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge. |
| 43 | Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish out side MD land complete all as specified and as directed by Engineer-in-Charge. |
| 44 | Material and labour for joint free and coloured non skid coloured ceramic tiles, 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or colour cement to match over and including screed bed of 20mm thick in Cement mortar 1:4 etc complete all as specified and as directed by Engineer-in-Charge.Make: H R Johnson / Orient Bell Tiles / Kajaria / Somany Tiles Ltd / Nitco tiles / Swastik Tiles / RAK tiles/ Orient bell |
| 45 | Material and labour for glazed coloured ceramic tiles, 1st quality of size 350 x 250 x 7 mm thick or 450 x 350 x 7mm thick (or nearest size) on vertical surface such as skirting, dado, riser/steps etc, set and jointed in neat cement slurry and pointed in colour cement to match including 10mm thick backing coat in Cement Mortar (1:4) etc complete all as specified and as directed by Engineer-in-ChargeMake:M/s H R Johnson/M/s Orient Bell Tiles/M/s Kajaria/M/s Somany Tiles Ltd/M/s Nitco tiles/M/s Swastik Tiles / RAK tiles/ Orient bell |
| 46 | Material and labour for joint free and coloured non skid coloured ceramic tiles (600x600mm ) , 7 to 8mm thick , in floors etc., set and jointed in neat cement slurry and pointed in white or colour cement to match over and including screed bed of 20mm thick in Cement mortar 1:4 etc complete all as specified and as directed by Engineer-in-Charge.Make: H R Johnson / Orient Bell Tiles / Kajaria / Somany Tiles Ltd / Nitco tiles / Swastik Tiles / RAK tiles/ Orient bell |
| 47 | Material and labour for coloured non skid coloured ceramic tiles, 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or colour cement to match, over & including cement plaster 10mm thick in Cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.Make: H R Johnson / Orient Bell Tiles / Kajaria / Somany Tiles Ltd / Nitco tiles / Swastik Tiles / RAK tiles/ Orient bell |
| 48 | Supply and fix in repairs vitreous china wash down, white, water closet pan (pedestal pattern) with 'P' of 'S' trap (of size 465mm x 355mm x 265mm),including plastic seat cover to match with colour of WC, closed pattern with flat bottom & cover and chromium plated mild steel or aluminium anodized hinging device including connecting to trap and flushing pipe, anti-syphonage pipe etc complete all as specified and directed by Engineer-in-Charge.Make : Cera/Hindustan/Parryware/Jaguar/Hindware/Johnson |
| 49 | Supply and fix in repair vitreous china squatting pan Orissa pattern of size 580 x 440mm white with integral foot rest, 'P' or 'S' trap front and back inlet and including connection to trap and to flushing pipe, anti syphonage pipe etc (excluding flushing cistern & flush pipe) all as specified and as directed by Engineer-in-Charge.Make : Cera/Hindustan/Parryware/Jaguar/Hindware/Johnson |
| 50 | Supply and fix in repairs PVC valveless, syphonic action type low level flushing cistern 10 ltr capacity white with inlet ball valve, float and handle including brackets, flush pipe of polyethylene of low or high density or PVC 32mm dia including connection to pipe and fixing of chains and pull or lever complete all as specified and as directed.Make : M/S Johnson Peddar/ Parryware/ RAK Ceramics/ CERA |
| 51 | Supply and fix in repairs vitreous china wash hand basin white flat back size 580 x 440 mm excluding taps, waste chain and plug and porcelain stopper but including CI brackets, cutting for and pinning in ends of brackets or erecting stand including 32mm bore discharge pipe with waste coupling of PTMT etc complete all as specified and as directed.Make : CERA/ RAK Ceramics/ Parryware/ Hindware/ Neyveli Ceramics (Neycer)/ Jaquar/ Kajaria (KEROVIT) |
| 52 | Supply and fix in repairs pillar taps fancy type cast copper alloy with capstan head, chromium plated, screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly nuts, screwed for iron pipes, 15mm bore complete all as specified and directed by Engineer-in-Charge.Make : Jaquar/ Marc/ CERA/ Kohler/ Player |
| 53 | Supply and fix in repairs concealed stop valve, cast copper alloy, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions of 15mm bore complete all as specified and directed by Engineer-in-ChargeMake : Jaquar/ Marc/ CERA/ Kohler/ Player |
| 54 | Supply and fix in repairs 15mm bore bib taps, fancy type, chromium plated, cast copper alloy, with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed by Engineer-in-Charge.Make : Jaquar/ Marc/ CERA/ Kohler/ Player |
| 55 | Supply and fix in repairs CI floor trap 100mm with grating including jointing with waste pipe, fixed in cement concrete 1:2:4 type B1, Complete all as specified and as directed by Engineer-in-Charge.Make : Electro-Steel/ Kejriwal/ NECO/ Kesoram |
| 56 | Supply and fix in repairs CI nahani trap 100mm with grating including jointing with waste pipe, fixed in cement concrete 1:2:4 type B1, Complete all as specified and as directed by Engineer-in-Charge.Make : NECO/Sighal iron Foundry/Bengal iron Co/Dhatu Udyog/Kapilansh |
| 57 | Supply and fix in repairs, sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever CI brackets and connecting union to pipe overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm including necessary fittings such 40mm coupling waste pipe etc complete all as specified and as directed by Engineer-in-Charge.Make : Diamond / Nirali / Neelkant/Parryware/Prayag |
| 58 | Supply and fix brass chromium plated 125mm Swivel shower for fixing with 15mm pipe. complete all as specified and as directed by Engineer-in-Charge.Make :Soma / Leader / Zoloto / Jaquar |
| 59 | Supply and fix in repair 450 mm x 600 mm bevelled edge mirror of selected quality glass, with PVC moulded frame decorative type, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup and washers complete all as specified and as directed by Engineer-in-Charge.Make : Modi/ Atul/ Saint Gobain |
| 60 | Supply & Fix soap dish CP fixed to plugs with chromium plated brass screws complete all as specified and as directed by Engineer-in- Charge. Make : CERA/Hindustan/Parryware/Jaguar/Hindware/ Johnson |
| 61 | Supply and fix in repairs brass chromium plated towel rail, 20mm dia, D type, 60cm long, between flanges complete all as specified and as directed by Engineer-in-Charge.Make : Crown / Jindal / Essess / Swastik |
| 62 | Taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed. |
| 63 | Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed. |
| 64 | Taking up or down steel tubing and connections for 25mm bore of pipe complete all as specified and directed. |
| 65 | Supply and fix mild steel tubing medium grade 15mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clamps and making good disturbed surfaces as per existing surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith |
| 66 | Supply and fix mild steel tubing medium grade 20mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clamps and making good disturbed surfaces as per existing surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith |
| 67 | Supply and fix mild steel tubing medium grade 25mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clamps and making good disturbed surfaces as per existing surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith |
| 68 | Supply & Fix 16mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc and making good disturbed surfaces as per existing surfaces complete all as specified and as directed by Engineer-in-Charge. Make: 1 PRINCE (Greenfi!l/ Fino lex/ Supreme/ SFMC |
| 69 | Supply & Fix 20mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc and making good disturbed surfaces as per existing surfaces complete all as specified and as directed by Engineer-in-Charge. Make: 1 PRINCE (Greenfi!l/ Fino lex/ Supreme/ SFMC |
| 70 | Supply & Fix 25mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc and making good disturbed surfaces as per existing surfaces complete all as specified and as directed by Engineer-in-Charge. Make: 1 PRINCE (Greenfi!l/ Fino lex/ Supreme/ SFMC |
| 71 | Note: Deduct Credit for demolished / dismantled material of Rs. (-) 59,825.00 (Minus) as listed in Schedule of Credit. Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum' Please Enable Macros to View BoQ information |
