|
| 1 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. |
| 2 | Material and labour Except sheeting (any thicness) Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and as directed |
| 3 | Supply and fix pre- painted galvalume aluminum zinc coating GI Based corrugated steel sheeting 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, chajjas, fixed with self tapping screws complete all as specified & directed |
| 4 | Supply and fix pre- painted galvalume aluminum zinc coating GI Based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, chajjas, fixed with self tapping screws complete all as specified & directed |
| 5 | Material and labour for 0.63 mm thick plain, galvanised mild steel as in ridges, hips, valley gutters, complete all as specified and as directed |
| 6 | Material and labour for 0.63 mm thick galvanised corrugated MS sheeting grade of zinc coating 275 with two corrugation side laps fixed with 'L' or 'J' hooks and washers in roofs complete all as specified and as directed |
| 7 | Preparation of old painted roof sheet surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and driected. |
| 8 | Dismantling of ceilling boards (fibre,pulp,insulation, etc.) any thickness including cover fillets complete all as specified and as directed. |
| 9 | Supply and fix anodised aluminium snap grid frame work for false ceiling of grid size 605mmx605mm consist of anodised aluminium main/cross Tee of size 40mmx25mmx2mm, weighing 36kg/RM, confirming to IS 733, IS 737& IS 1285. The main and cross Tee shall be jointed at junction/crossing with anodised aluminium angle bracket of 15mmx15mmx1.5mm, weighing0.12KG/RM, fixed with suitable mild steel nut bolt & washers, snap grid frame work shall be fixed to ceiling with supporting hanger 6mm dia GI(upto 1200mm length) adjusting level fixed to roof slabs/truss by means of cleats made out of GI flat 40x3 mm size 60 mm long and expension hold fasteners 12.5 mm dia. 40 mm long complete all as manufacturer instruction fixed as specified. |
| 10 | Material and labour for Non Asbestos fibre cement building boards 4mm thick fixed or laid in aluminium frame work with screws as in ceiling complete all as directed and as directed |
| 11 | Dismantling framed timber scantlings 40 Sq. cm and over in section and in any position |
| 12 | Material and labour for 2nd class hard wood in scantling clean swan used in repair for posts and scantling in any position unframed work and fixed complete all as specified and directed by Engr-in-Charge. |
| 13 | Dismantling of unframed work fillets, rails, posts, rafters, purlins etc., under 40 Sq. Cm in section. |
| 14 | Material and labour including preparing surfaces of new wood and wood based materials, of any description , not otherwise described, over 10 cm width or girth, and treated with two coats of synthetic enamel paint over coat of pink primer. |
| 15 | Taking down tarfelt with tiles and cement plaster from roof surfaces and lowering and removing the same to a distance exc. 50 m and n. exc. 100m including roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust complete all as directed. |
| 16 | 15 mm thick screed bed or bedding layers in cement mortar (1:4) in order to maintain proper slope over existing roof surfaces for laying APP based polymeric membrane, finished even and smooth without using extra cement complete all as specified and directed. (NOTE : Polymeric membrane shall be measured and paid separately under relevant item ). |
| 17 | PCC (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) as in roof kerbs, slightly rounded or chamfered on edges, mixed with water proofing compound @ 3% by weight of cement or as per manufacturer's instructions, finished even and smooth on exposed concrete surface without using extra cement complete all as specified and directed.(Note: Water proofing compound shall be measured and paid seperately under relevant item as supply only). |
| 18 | Supply only integral water proofing compound conforming to IS:2645-1975\, complete all as specified and directed. |
| 19 | Material and labour for 25mm thick PCC type B-0, 1:2:4 (12.5mm graded aggregate) in ground floors complete all as specified and directed |
| 20 | Material and labour for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. |
| 21 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 22 | Material and labour for Demolition of (unreinforced) cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level). |
| 23 | Material and labour for cement concrete 25mm thick type B1 1:2:4 at top surface using 20mm graded aggregates, complete all as specified and directed |
| 24 | Material and labour for Non - skid coloured Ceramic floor tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 10mm thick for laying floor finishes in cement mortar 1:6, complete all as specified and as directed. Make: Somany/ Orient/ Johnson |
| 25 | Material and labour for Glazed colour ceramic tiles as in vertical surface (350x 250x 7 mm/ 450X 350X 7mm thick) set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering cement mortar 10mm thick for fixing tile in dado/skirting in CM 1:3, complete all as specified and as directed. Make: Somany/ Orient/ Johnson |
| 26 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar. |
| 27 | Material and labour for 25mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 20mm thick screed bed or bedding lay in CM 1:6 |
| 28 | Taking up or down 16mm bore PPR pipe and connection complete all as specified and directed. |
| 29 | Taking up or down 15mm bore GI tubing and connections, including cleaning for refixing or removal complete all as specified and directed. |
| 30 | Refixing old servicible GI tubing 15mm bore, medium grade with all new fittings and connections in new or old position (Walls, ceiling, floors, etc. complete all as specified and directed. |
| 31 | Supply and fix GI tubing 15mm bore, medium grade with all new fittings and connections such as bends, elbows, nipples, socket, tees, unions short pieces etc in new or old position (Walls, ceiling, floors, etc. complete all as specified and directed. |
| 32 | Taking up or down 20mm bore PPR pipe and connection complete all as specified and directed. |
| 33 | Taking up or down 20mm bore GI tubing and connections, including cleaning for refixing or removal complete all as specified and directed. |
| 34 | Refixing old servicible GI tubing 20mm bore, medium grade with all new fittings and connections in new or old position (Walls, ceiling, floors, etc. complete all as specified and directed. |
| 35 | Supply and fix GI tubing 20mm bore, medium grade with all new fittings and connections such as bends, elbows, nipples, socket, tees, unions short pieces etc in new or old position (Walls, ceiling, floors, etc. complete all as specified and directed. |
| 36 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth |
| 37 | Taking down chowkats or frame with shutters (without taking off shutters from the frames ) exc. 1.5 sqm but n.exc. 4 sqm each including taking out hold fasts and PCC holdfast block complete all as specified and directed.all as specified and directed. |
| 38 | Taking down chowkats or frame with shutters (without taking off shutters from the frames ) not exc. 1.5 sqm each including taking out hold fasts and PCC holdfast block complete all as specified and directed all as specified and directed. |
| 39 | Providing and fixing factory made PVC kitchen & cupboard frame of the size 75m X 40mm with wall thickness of 5m m, made out of extruded 5mm thick plain/prelam PVC sheet of density 600kg/cbm, reinforced with 15mm X 15mm MS Square tubes of 19 gauge thickness throughout the frame and miter cut a two corners and jointed with 2nos of 15mm long brackets of 10mm X 10mm MS Square tubes. The door frame shall be fixed to the wall using 65/100 long MS Screw through the frame by using PVC fasteners. A minimum of 4nos of screw to be provided for each vertical member and minimum of 2nos of screw to be provide horizontal member etc. complete as per direction of Engineer-in-charge, manufacturer’s specification and drawing. |
| 40 | Providing and fixing PVC Kitchen and Cupboard Shelves/Partition of required size consisting of panel of 18mm Ply thick PVC ECO Ply and for supporting the hold of shelf/Partition and shall provided 3 edges in size 18mm X 18mm as per required length. The front side of the edge visible in the front of the shelf/Partition to be edge lipped by 18mm width X 1mm thick sheet of density 600kg/Cbm density, using solvent cement etc. complete as per direction of Engineer-in-charge, manufacturer’s specification and drawing.Make :Kumar Arch Tech Pvt Ltd (Echon)”brand or equivalent make approved by Engr-in-charge |
| 41 | Providing and fixing PVC Kitchen and Cupboard Shutter of 30mm thick consisting of frame made out MS Tubes of 19 gauge thickness and size 19mmX19mm covered with 5mm thick PVC ‘C’ channel of size 30mm X 50mm forming stiles, top and bottom rails. Paneling of 5mm thick plain/prelam PVC Sheets of density 600 to 700kg/cbm density fitted in the M.S Frame and sealed to the front stiles and rails (which should have 5mmX30mm wide PVC strips) and attached to back of stiles and rails (which should have a 5mm 45 degree bend portion as beading) and 10mm decorative PVC beading is used on the front side of panel externally impact perfact finish to the shutter and joined together with solvent cement adhesive and 10mm thick (5mmX2X12mm wide PVC sheet is used as gap insert for top and bottom rail, 18mm X 1mm pvc edge lipping is done on top & bottom side. An additional of 5mm thick PVC strip of 12mm width is to be stuck on the interior side of the “C” Channel using PVC Solvent cement adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification and drawing.Make :Kumar Arch Tech Pvt Ltd (Echon)”brand or equivalent make approved by Engr-in-charge |
| 42 | Supply and fix Continous (Piano) Hinges 40 mm, mild steel, bright finish or electrogalvanised |
| 43 | Supply and fix Aluminium handles, cast type, anodised, 75mm long complete all as specified and directed. |
| 44 | Supply and fix aluminium, anodised,barrel tower bolts 75mm long of extruded section complete all as specified and directed. |
| 45 | Supply and fix 100mm Aluminium anodised Hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws |
| 46 | Supply and fix in repair 15mm bore PTMT bib taps any colour high pressure screwed down for iron pipe and fixed(minimum weight 90 gram) complete all as specified and directed. |
| 47 | Supply and fix in repair Bib taps, cast copper alloy,CP with crutch or butterfly handle, screwed down, screwed for iron pipe, 15mm bore of pipe brass ferrule complete all as specified and as directed. |
| 48 | Supply and fixing in repairs pillar taps 15mm bore CP chromium plated alloy complete all as specified and as directed.Make -Prayag |
| 49 | Supply and fix in repair 15mm dia, Stop valves, cast copper alloy, screwed down, high pressure, with crutch orbutterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as Make -Prayag directed. |
| 50 | Supply and fix in repair sink/Waste coupling of PTMT(half or full threaded) .(Minimum weight 32mm-45gms complete all as specified and as directed. Please Enable Macros to View BoQ information |
