|
| 1 | DESCRIPTION OF ITEMS |
| 2 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar etc. |
| 3 | M&L Granite 20 mm thick(of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plateforms and like including pointing in white cement(1:2) using marble dust with admixture of pigment to match with shade of granite over & incl 20 mm thick screed bed built in CM 1:4, complete all as specified and directed. |
| 4 | M&L for Providing edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete complete all as specified & directed. |
| 5 | M&L Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types complete all as specified and directed. |
| 6 | M & L 20 - 25 mm thick machine cut Kota stone slab in flooring or treads of steps over and including 15 mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab/rubbing, polishing etc complete all as specified and directed. |
| 7 | All as per item no - 5 but as in skirting over 10mm thick rendering in CM (1:4 ) complete all as specified and directed. |
| 8 | M & L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high glossy finish complete. |
| 9 | M & L for heavy duty parking tiles non skid type (coloured) minimum 10 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exc 0.18 sqm , in floors etc.set jointed in neat cement sluury and pointed in white or coloured cement to match over & incl 20 mm thick screed bed built in CM 1:6, including dismantling of floor hearth,wall tiling etc complete all as specified and directed. |
| 10 | M & L for chequered cement concrete tiles 30cm x 30cm x 25 to 30mm thick (Glossy finished) with grey cement and pigment, including 20 mm thick screed in CM 1:6, set jointed & pointed in neat cement slurry in floors complete all as specified and directed. |
| 11 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour ( Glossy finish), design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. |
| 12 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour ( Glossy finish), design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. |
| 13 | M & L in repair for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. complete all as specified and directed. |
| 14 | Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete all as specified and directed. |
| 15 | M & L 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base for pavement , path, floor etc,including demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness complete all as specified and directed. |
| 16 | M&L for 75 mm thick PCC 1:3:6 type C-2 (using 20mm graded stone aggregate) as in plinth protection Finishing surfaces of concrete topping even and fair (without using extra cement) including making joint at every 3 mtr interval and at corner and filled with mixture of bitumen and sand and finished even and fair and laid in alternate bays complete all as specified and directed. |
| 17 | Dismantling timber scantling 40 Sq. cm. and over framed work in any position. |
| 18 | Dismantling wrought iron or mild steel work of any description as provided for Roof trusses, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) complete all as specified and directed. |
| 19 | S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed. |
| 20 | M & L in repair for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410-W(Gde-E- 250)quality-A |
| 21 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 22 | S & F Pre- painted galvatume aluminum zinc coating GI based profile pattern steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in\ roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 23 | S & F for 2mm thick Fibre glass reinforced translucent corrugated/plain sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc.complete all as specified and directed. |
| 24 | S & F for 0.671mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275.complete all as specified and directed. |
| 25 | Dismantling fencing wire mesh, any type etc complete. |
| 26 | Dismantling posts or struts (wood, steel or R.C.C.) any section,Posts embedded in including taking out embedded portion and making good disturbed ground Concrete, brick work, masonry,etc complete. |
| 27 | M&L for mild steel works as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 etc complete. |
| 28 | Supply only chain link fencing including line wire any mesh size and any type of standard rails staining bolt etc including provision of binding wire etc complete. |
| 29 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire etc complete all as specified. |
| 30 | M & L for TMT steel bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed. |
| 31 | M & L for preparation of new or previously untreated steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over of redoxide zinc chrome coat complete all as specified and as directed. |
| 32 | M & L for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) ® |
| 33 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc and getting out in any type of soil complete all as specified. |
| 34 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick with soil obtained from excavation complete all as secified and directed. |
| 35 | Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as spcecified and as directed. |
| 36 | M&L brick work with Subclass 'B' bricks straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including demolition of brick work built in cement mortar complete all as specified and directed. |
| 37 | M & L rendering 10 mm thick on brick wall/cement block wall or concrete surfaces in cement mortar 1:6, surfaces finished even and smooth without using extra cement complete, etc. all as specified and as directed. |
| 38 | M & L rendering 15 mm thick on brick wall/cement block wall or concrete surfaces in cement mortar 1:4 surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 39 | S & F in repairs, 110 mm bore PVC (SWR) pipes, single socketed, fixed to walls in any length with rubber ring joints complete all as specified and directed. |
| 40 | S & F in repairs, 110 mm bore PVC (SWR) pipes, single socketed, laid in trenches or in floors in any length with rubber ring joints complete all as specified. |
| 41 | S & F in repairs, 110 mm bore PVC (SWR) bends (any radius), diminising pieces or tapers (large bore measured) all as specified and directed. |
| 42 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillet complete. |
| 43 | S & F of suspended ceiling system of grid/section of size 600x600mm comprising of interlocking GI powder coated main T-runners of size 24x38x0.33mm thick of length 3000mm, cross-T of size 24X32X0.33mm thick of length 1200mm and secondary intermediate cross-T of size 24X32X0.33mm thick of length 600mm and perimeter wall angle of size 24x24x0.40mm thick of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs @ 450mm center to center and 40mm long dry wall S.S. screws with and including 4 mm thick E-board false ceiling tiles of size 595x595mm of approved texture, design and pattern to be placed in the grid system duly suspended with 6 mm dia GI wire hangers fixed with steel dash fasteners or from purlin of the roof with clip complete all as specified and directed. |
| 44 | Dismanling floor,hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 45 | M & L for Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed in cement mortar 1:6, complete all as specified and directed. |
| 46 | Demolition of cement concrete (reinforced) in any position of any description ( below or above ground level) complete all as specified and directed. |
| 47 | M & L for RCC (Nominal Mix) Type B1 (1:2:4) with 20 mm graded aggregates as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 48 | M & L for RCC (Nominal Mix) Type B1 (1:2:4) with 20 mm graded aggregates as in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 49 | S & F for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed. |
| 50 | S & F for Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed. |
| 51 | M & L for Providing precast cement concrete louvres and jallies, 25mm thick (measured solid) Type B0 1:2:4(12.50 mm graded aggregate) set in 1:4 cement mortar, including all mouldings complete all as specified and directed. |
| 52 | M&L for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 53 | M & L for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 54 | S & F for Sheet glass 4mm thick, selected quality and glazing with EPDM rubber/neoprene gasket in squares exc 0.5 sq. m in each pane complete all as specified and directed. |
| 55 | M & L for Aluminium Window Blinds (venetian Blinds) of width upto 1.80 mtr and drop upto 1.50 mtr with roller arrangement for folding and made up of PVC/moisture resistant fabric complete all as specified and directed. Please Enable Macros to View BoQ information |
