|
| 1 | Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified . |
| 2 | Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & getting out in soft/loose soil complete as specified |
| 3 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface in soft/loose soil complete as specified. |
| 4 | M & L for hardcore of broken bricks of gauge not exceeding 63 mm , deposited, spread and leveled in layers not exceeding 15 cm thick, watered and rammed to a true surface. |
| 5 | M&L 75mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate complete as specified. |
| 6 | M&L for Brickwork with old size sub class B bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete as specified. |
| 7 | M&L 25 mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate complete as specified. |
| 8 | M & L for cement concrete (1:3:6) type C-2 (using 40 mm graded aggregate) as in foundations,filling and mass concrete for embadding of fencing post holes for securing vertical angle posts all as specified and directed. |
| 9 | S&F Steel work in tubular trusses and vertical posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 complete all as specified |
| 10 | S&F Rolled mild steel purlins ,crane gantries, rails & fastenings & heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc.Gde Fe410-0 or Fe 310-O complete as specified. |
| 11 | M&L Chequered cement concrete tiles 30cmx30cmx25mm thick machine pressed set jointed and pointed in neat cement slurry as in floors and cut and polished using grey cement and pigments over screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar (1:6) complete all as specified and directed |
| 12 | M&L Brick work with sub class B bricks straight or curved on plan to any radius in half brick thick walls, built in cm 1:4 |
| 13 | S&F Mild steel bolts. purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends;screwed end to be fitted with washers and one hexagonal or square nut.dia of bolt 11 to 15mm & length exc 5cm long and n exc10cm complete as specified. |
| 14 | S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in roof covering/cladding/ eaves board fixed with self tapping screw complete all as specified and directed. |
| 15 | S & F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in roof covering/cladding/eaves board fixed with selp tapping screw complete all as specified and directed. |
| 16 | M&L of two coat of synthetic enamel paint over one coat of red oxide on new steel surfaces of any description over 10cm in width or girth incl preparation of surfaces complete all as specified. |
| 17 | M&L Rendering 15mm thick on stone masonry surfaces or surface fair face of brickwork in CM (1:4) finished even & smooth (without using extra cement) complete all as specified and as directed |
| 18 | M& L for two coat of cement base paint on new plastered surface including preparation of surface complete all as specified and as directed |
| 19 | Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil. |
| 20 | Removing Excavated soils exceeding 250m but not exceeding 500m and depositing where directed. |
| 21 | NOTES :-1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum.2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc, required for complete and proper execution of the work. Refer Schedule 'A' notes for details. Please Enable Macros to View BoQ information |
