|
| 1 | M&L for repair to pot holes any depth, nexc 1 Sqm each including sweeping free from dust and mud, and water, scoring sunken surfaces in roads, paths etc cutting around edges to at least 25mm in depth and making good by applying a tack coat with bituminous primer of grade Vg-10 @ 5 Kg per 10 Sqm putting in premixed bituminous macadam using paving bitumen, well rammed and sealed with binder 9.8 Kg of grade Vg-30 per 10Sqm blinded with 0.09 cum of stone chippings, 6.3mm size and again well ramming (including supply of premixed macadam, binder and chippings ) depth of pot holes exc 30 mm all as specified and directed. |
| 2 | M/L for 75 mm thick (compacted thickness) WBM with coarse aggregates (40 to 63 mm size) or of grading 3 (20mm to 50mm size) spread, rolled and consolidated with 8 to 10 ton power roller to gradient and camber required with granite, trap or basalt stone complete all as specified and directed |
| 3 | All as per itme No 2 above but except materials complete all as specified and directed |
| 4 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc. 400 Sqm, exc. 50mm but n.exc 100mm deep complete all as specified and directed. |
| 5 | M&L for preparation of surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags or with compressor air blower to remove all loose dirt etc and applying evenly a priming coat with paving bitumen VG 10 grade @10 Kg/10 Sqm by mechanical sprayer etc complete all as specified and as directed. |
| 6 | M&L for putting premix bituminous macadam (consolidated thickness 75 mm or less) with crushed and graded stone aggregate mixed together with VG-30 graded paving bitumen (4% by weight of total mix) to meet the desired requirement as mentioned in Particular Specification, mixing bituminous concrete in hot mixing plant, laying and spreading uniformly by means of mechanical paver and rolled and compacted to required gradient and camber by 8 to 10 ton vibratory road roller complete all as specified and directed. |
| 7 | M&L for preparation of black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with broom and finally fanning the cleaned surface with gunny bags or with compressor air blower to remove all loose dirt etc and applying evenly tack coat with bituminous primer of grade VG-10 @5 Kg/10 Sqm by mechanical sprayer etc complete all as specified and as directed. |
| 8 | M&L Bituminous premixed semi dense asphaltic 30 mm thick (consolidated thickness) with 5.5 % binder content by weight of total mix paving bitumen (VG-30) viscosity grade mixed in hot mix, plant transported to site on tippers and laid with mechanical paver, and rolled to uniform smooth surface with 8 to 12 tonne capacity power roller and compacted to required camber and gradient and all directed and specified by Engineer-in-charge.Note :- (i)The mix design shall be got done from approved lab and got approved from AGE(I) before commencement of work.(ii) In the event of variation in the mix design in the percentage of binder content on minus side, the difference in quantity of binder content will be adjusted through supply only rate at market rate or procurement rate whichever is more for paving bitumen VG-30.However no adjustment shall be applicable if excess quantity of binder content is used/approved in the execution of work under this item. |
| 9 | M&L for providing and laying 1.5mm thick hot thermoplastic road marking paint for Painting lines, dashes, arrows, letters, etc. on roads, pavements and the like exc 10cm wide of white/yellow colour in uniform thickness with glass beads as per clause no 803 of MOST specification incl. cleaning of road surface, heating the material within specified temperature limit as marking with all arrangement required for proper completion of work all as directed. |
| 10 | Supply and fix in repair cat eye reflective type of ABS body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector fixed with and including MS stud of suitable size as per manufacturer's instructions. |
| 11 | Supply and fix in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufacturer's instructions etc. all as specified and directed Please Enable Macros to View BoQ information |
