|
| 1 | Percentage BoQ BoQ_Ver3.0 Percentage Normal INR Only INR CIL Hide Select GST Registered Bidder under regular scheme GST Registered Bidder under composition scheme GST Unregistered Bidder Not Applicable Tender Inviting Authority: Staff Officer (Civil), Wani Area, Western Coalfields Limited Name of work: Day to day repair & maintainance of water supply of all colonies under Ghugus Sub Area.NIT no.: WA4350-CIV-E-013-2026-27 . Category of services (To be selected by department) Category of bidder (To be selected by bidder) To be entered by department Service Tax Category ( To Be Selected by Bidder) ITC Not Available Works Contract Bidder's status (mandatory) Rate of GST (in %) Total GST(in Rs.) GST to be paid by bidder (in Rs.) GST to be paid by WCL (in Rs.) Name of the Bidder/ Bidding Firm / Company : Select 18.0 0.0 0.0 0.0 PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the bidder name and values only.) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S. No. Item Description Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category Total amount inRs. P TOTAL AMOUNT With Taxes Total amount in words |
| 2 | Assistance in excavation of earth for making trench/ pit/ drain for laying of pipe, dewatering of excavated pit and other associated works to repairing of pipe lines all complete as per the instructions of engineer in charge. |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kinds of soil |
| 4 | Filling available excavated earth (excluding rock) in trenches, plinth. sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and for all lift |
| 5 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar |
| 6 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:4:8 or leanear mix (i/c equivalent design mix) |
| 7 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources: 6 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 9 | Providing and fixing G.I. pipes complete with G.I. fittingsincluding trenching and refilling etc. External work 50 mm dia nominal bore |
| 10 | Providing and fixing G.I. pipes complete with G.I. fittingsincluding trenching and refilling etc. External work 80 mm dia nominal bore |
| 11 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes, having thermal stability for hot & cold water supply,including all CPVC plain & brass threaded fittings,including fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one stepCPVC solvent cement and testing of joints complete as perdirection of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal outer dia Pipes |
| 12 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes, having thermal stability for hot & cold water supplyincluding all CPVC plain & brass threaded fittings Thisincludes jointing of pipes & fittings with one step CPVCsolvent cement, trenching, refilling & testing of jointscomplete as per direction of Engineer in Charge. External wok 25 mm nominal dia Pipes |
| 13 | Providing and fixing 50mm diameter, Class II, C.I. sluice valve (with cap) complete with nuts,bolts, rubber insertions etc. (the tail piece if required will be paid separately). |
| 14 | Providing and fixing 80mm diameter, Class II, C.I. sluice valve (with cap) complete with nuts,bolts, rubber insertions etc. (the tail piece if required will be paid separately).class ii |
| 15 | Providing and fixing C.I. sluice valves (with cap) completewith bolts, nuts, rubber insertions etc. (the tail pieces ifrequired will be paid separately class ii 100 mm dia |
| 16 | Providing and fixing C.I. sluice valves (with cap) completewith bolts, nuts, rubber insertions etc. (the tail pieces ifrequired will be paid separately class ii 150 mm dia |
| 17 | Providing and fixing ball valve (brass) of approved quality,High or low pressure, with plastic floats complete : 15 mm nominal bore |
| 18 | Providing and fixing ball valve (brass) of approved quality,High or low pressure, with plastic floats complete : 20 mm nominal bore |
| 19 | Providing and fixing ball valve (brass) of approved quality,High or low pressure, with plastic floats complete : 25 mm nominal bore |
| 20 | D.I. FITTINGS (Mechanical Joints) Providing and supplying D.I. fittings with ISI mark Mechanicaljoint confirming to tables 12 to table 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM gaskets, Nuts, Bolts, Washers and Ductile iron follower glands. Fittings should be with internally Ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation and excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete. MJ Collar/Coupling 200 mm dia |
| 21 | D.I. FITTINGS (Mechanical Joints) Providing and supplying D.I. fittings with ISI mark Mechanical joint confirming to tables 12 to table 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM gaskets, Nuts, Bolts, Washers and Ductile iron follower glands. Fittings should be with internally Ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation and excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete. MJ Collar/Coupling 150 mm |
| 22 | Providing and fixing bolts including nuts and washers of required sizes complete as per the instructions of EIC. |
| 23 | Providing & fixing of M.S welding rod of approved quality of Size 3.15 & 4.00 mm.etc complete. |
| 24 | Providing & fixing of C.I welding rod of approved quality of Size 350 mm.etc complete. |
| 25 | Providing and fixing PTMT bib cock of approved quality approved quality and colour.15mm nominal bore, 86 mm long,weighing not less than88 gms |
| 26 | Providing and fixing PTMT pillar cock of approved quality and colour 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms |
| 27 | Providing and fixing PTMT stop cock of approved quality 15 mm nominal bore, 86 mm long, weighing not less than88 gms |
| 28 | Providing and fixing PTMT, push cock ofapproved qualityand colour.15 mm nominalbore, 98 mm long, weighing not less than75 gms |
| 29 | Providing and fixing PTMT swivelling shower, 15 mmnominal bore, weighing not less than 40 gms |
| 30 | Hiring of D.G set and cutter for cutting of C.I pipe and other works at site as and when required including operator,fuel charge,and transportation at site all complete as per instruction of Engineer in charge. |
| 31 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 32 | Providing and fixing of spindle (stainless steel) and check nut(brass) of cast iron sluice valve of all diameter of 50mm,80mm,100mm,150mm,200mm with threading of both spindle & checknut as per required dimension etc.all complete as per direction of Engineer in charge. |
| 33 | Providing and supplying Champion Style-20 asbestos jointing sheet of size 1500 × 2000 mm and 3 mm thickness, suitable for mechanical/flanged joints, including cutting to required size, wastage, handling, transportation, loading, unloading, stacking, complete as per specifications and directions of the Engineer-in-Charge. |
| 34 | Providing and supplying graphite gland packing of approved make, size and grade, suitable for valves, pumps and mechanical equipment, including cutting to required length, wastage, handling, storage, transportation, loading, unloading,complete as per specifications and directions of the Engineer-in-Charge. |
| 35 | Total impact of GST for the purpose of CTC Total in Figures 2066757.5830338984 2066757.5830338984 INR Twenty Lakh Sixty Six Thousand Seven Hundred & Fifty Seven and Paise Fifty Eight Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 INR Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
