|
| 1 | Providing and fitting fixing of directly mounting Thermal Overload Relays of L&T make, Type ML as per direction of Engineer-in-charge. |
| 2 | (a) Relay Range(A) 20-32 Cat No. SS91859OOEO |
| 3 | (b) Relay Range(A) 20-32 Cat No. SS91859OOFO |
| 4 | Providing and fitting fixing of 3 pole power contractors Type ML (standard coil voltage AC-3 Duty, 415 V, 50 Hz, Motor Rating AC-3 Duty, 415 V, 50 Hz, 3 ph) of L&T make as per direction of Engineer-in-charge. |
| 5 | (a) Type ML2 AC3 rating(A) 32, AC1 Rating(A) 40, Aux Contacts 2 NO+2NC Cat No. SS90701 |
| 6 | Providing and fitting fixing of Fully Automatic Star Delta type Motor Starter (3 ph, 50 Hz, 415 V) in steel sheet enclosures with contractors and timer etc. complete suitable for submersible pump L&T, BCH, ABB make as per specification and direction of Engineer-in-charge. |
| 7 | (a) 25 HP/18.5 KW Relay range within 13-21+10% |
| 8 | (b) 35 HP/26 KW Relay range within 20-32 +10% |
| 9 | (c) 50 HP/37 KW Relay range within 28-42 +10% |
| 10 | Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral Link (TPN), 415/500 volt L&T/Havells/BCH make etc. as per specification and direction of the Engineer-in-charge. |
| 11 | (a) 63 amps |
| 12 | (b) 100 amps |
| 13 | (c) 200 amps |
| 14 | Providing and fitting fixing Cylindrical Fuse Link-Type HP suitable for Type HF suitable for Type FN 63/FNX 63 S-D-F & for HC 63 fuse base |
| 15 | Providing and fitting fixing DIN Type Fuse Link type HN suitable for Type FN 100/125/160/ FNX125/ 160 S-D-F & for HB 160 fuse base |
| 16 | Providing and fitting fixing DIN Type Fuse Link type HN suitable for type FN-200/ FNX 200 S-D-F & for HB 250 fuse base |
| 17 | Providing and fitting fixing single phasing preventor+selectable under voltage+selectable over voltage on delay 5 sec & off delay 15 sec phase asymmetry 10 % L&T/BCH/HAVELS/Seimens etc. make complete as per specification and direction of the Engineer-in-Charge. |
| 18 | Providing and fitting fixing with PVC insulated 3 core flat copper cable conforming to relevant IS code for submersible motor with all necessary equipments and fittings as required as per specification and direction of the Engineer-in-charge. |
| 19 | (i) 4.0 sqmm |
| 20 | (ii) 6.0 sqmm |
| 21 | Providing and fitting fixing with PVC insulated single core multistrand copper cable conforming to IS: 694 for inter connection with all electrical equiments of the pannel board as per specification and direction of the Engineer-in-charge. |
| 22 | (i) 10.00 sqmm |
| 23 | (ii) 16.00 sqmm |
| 24 | (iii) 25.00 sqmm |
| 25 | (vi) 70.00 sqmm |
| 26 | Providing and fitting fixing of moulded case circuit breaker (MCCB) of different thermal release range, 415-V, 50 Hz (L&T, BCH, ABB make) as per specification and direction of the Engineer-in-charge. |
| 27 | (iv) 63-80 Amps |
| 28 | (v) 80-100 Amps |
| 29 | Providing and fitting fixing of moving iron type, Range 0-100/0-200 amps, 96 mm x 96 mm size AC Amps meter direct reading type (L&T/AE make) with selector switch and CT coil as a electrical instrument of the panel board as per direction of Engineer-in-charge. |
| 30 | Providing and fitting fixing of moving iron type, Range 0-500 V, 96 mm x 96 mm size AC Volt meter (L&T/AE make) with selector switch as a electrical instrument of the panel board as per direction of Engineer-in-charge. |
| 31 | Providing and fitting fixing of Electronic Timers Type ST-100, 415V, 50 Hz, 3-30 secs as per direction of Engineer-in-Charge. |
| 32 | Providing and fitting fixing of spare contact kit ML series of L&T/BCH make as per direction of the Engg-in-charge. |
| 33 | Type ML2 |
| 34 | Type ML3 |
| 35 | Type ML6 |
| 36 | Type ML12 |
| 37 | Providing and fitting fixing of spare coil ML series of L&T make as per direction of the Engg-in-charge. |
| 38 | Type ML2/3 |
| 39 | Type ML6 |
| 40 | Type ML12 |
| 41 | Providing and fitting fixing of copper tube terminal heavy duty BS as per direction of the Engg-in-charge. |
| 42 | 10-6 sqmm |
| 43 | 16-6 sqmm |
| 44 | 25-8 sqmm |
| 45 | 95-13 sqmm |
| 46 | Providing and fitting fixing of Fuse Units (Kit Kat) (Rewirable/HRC Type) conforms to IS 2086 as per direction of the Engg-in-charge. |
| 47 | 100 A/415V |
| 48 | 200 A/415V |
| 49 | 400 A/415V |
| 50 | 500 A/415V |
| 51 | Supplying and fitting fixing of 3 pole power contractors of ML-3 Type, 40 amps rating, cat no-SS90721 suitable for 3 PH fully automatic star delta starter of L&T make as per direction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
