|
| 1 | Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls , Brick / Stone Masonry in cement mortar |
| 2 | Dismantling reinforced cement concrete in existing septic tank cover slab clearing away and carefully stacking materialsin etc., |
| 3 | Dismantling plain cement concrete, clearing away and carefully stacking materials useful for reuse for any thickness of walls |
| 4 | Earth work open excavation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc., as per SS 20 A. TNDSS NO: 23 & 24 VI (S2) VI,VII 9,10 with standard specifications. |
| 5 | Plain Cement Concrete 1:4:8 Mix (one part cement, four part sand and Eight part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as per TNDSS NO : 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge. |
| 6 | Plain Cement Concrete 1:2:4 (One part of Cement, one and half part of Crushed Sand (M- Sand), three coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification |
| 7 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification |
| 8 | Brick work in CM 1:5 (One cement & Five M-Sand) using Fly Ash bricks of size 230x110 x 70mm including finishing, curing, etc., complete complying with standard specification |
| 9 | Plastering in Cement Mortor 1:5 Mix (one cement, five sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications. |
| 10 | Providing and applying wall putty for ceiling surface with one coats of approved quality white cement based wall putty over cleaned and prepared ceiling surface including cost and conveyance of all materials to site, labour charges for surface cleaning, scrapping, filling minor cracks, applying putty, rubbing with emery sheet for smooth finish, scaffolding arrangements, curing, loading and unloading charges, complete complying with standard specifications and as directed by the Engineer in charge. |
| 11 | Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications |
| 12 | Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors. |
| 13 | Wiring with 2x1.5sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor cable of 1100V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5AFT switch with painting of suitable colour with continuous earth wire connection of 14SWGTC wire for open PVC light point and fan point. (SD 16) |
| 14 | Supply and fixing of 5A/15A 3 pin combined flush type wall socket with 5A flush type switch concealed insuitable MS box in flush with wall and covered with 3mm thick hylem sheet SD - 137 |
| 15 | Supply and fixing of 5A/15A 3 pin combined flush type wall socket with 15A flush type switch concealed insuitable MS box in flush with wall and covered with 3mm thick hylem sheet SD - 139 |
| 16 | Supply and fixing 1200 mm (48\\") sweep AC ceiling fan complete with stepped electronic 300W regulator with the existing down rod on the existing clamps. (SD-110) |
| 17 | Supply and fixing of Tube light including all cost of materials and labour charges etc.., complete as pe Standard specification. |
| 18 | Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting . |
| 19 | Supply and fixing of 30W LED street light fitting with LED (Lower end) with 25mm dia. GI pipe(class B) with 1 no.25mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting (SD-456) |
| 20 | Supply and fixing MCB sheet steel enclosure distribution board with double door (metal) |
| 21 | Providing & fixing PVC RAIN WATER DOWNFALL PIPE of the following dia with necessary T.W.Clamps Plugs, Shoes,Bemds, other clamps, screws nails etc.,complete complying with standard specification. The rate is inclusive of cost of removable iron gratings of appropriate size. The size of Teak Wood plugs used is 150X25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of \\"U\\" clamps at the centre of pipes to be fixed.110mm dia PVC Pipe [4 Kg/SqCm] |
| 22 | Supply, delivery and fixing of 25LPH Reverse Osmosis Plant (RO Plant) with all necessary accessories in site including stand and with cover inclusive all cost of material and labour charges etc., Complete |
| 23 | supply and lowering delivery of PVC and GI pipe special with necessary special to trench and laying to proper grade and alignment .including all cost of materials, labours ,etc..complete as directed by departmental officers . 25mm pvc pipe |
| 24 | 50mm pvc pipe |
| 25 | 25mm pvc elbow |
| 26 | 25mm pvc Tee |
| 27 | 20mm pvc Tap |
| 28 | Supplying and Installing Metal False Ceiling using Fire Retardant Galvanized Steel Sheet Plain lay in tile size 600mm x 600mm, 0.5mm thick, powder coated on external surface and shall have flange on all four sides to rest on the exposed grids. The system to give 600mm x 600mm centre to centre 'T'. The 'T' shall be not be dipped GI Tee Section 3600mm long main Tee. 24mm wide and cross Tee panels are formed by running main runner of 'T' section of size 30mm x 24mm powder coated at bottom at intervals with powder coating at bottom. Necessary provision of inter locking of 'T' section are made at required intervals not exceeding 1200mm. The main runners are suspended from the ceiling by means of 4mm dia. GI rods fixed to the ceiling using anchor fasteners of 50mm x 8mm size with nylon inset and hooked to the main rubbers using clips. The last hangers at end of each rubber should not be greater than 600mm from the adjacent wall. The last panel shall be placed at the side wall using edge profile 'L' Angle of size 20mm x 20mmand fixed to the side wall the false ceiling should be fixed of same level and should present a neat look (PWD SOR 2025-26, P.no.116,M-0689) |
| 29 | supply, delivery and Fixing of 20liter tilting type Grinder with 2HP Motor including all cost of materials,conveyance to site and labour chargers for fixing ,etc..complete as directed by departmental officers . |
| 30 | Repairing of grinding machine for amma unavagam. including all cost of materials such as removing the old damaged gear set,belt and replace to new gear set with necessary and \\"B\\" type belt accessories,grease,testing, labours charges,etc.., complete as directed by the departmental officers |
| 31 | supply and delivery of Mixer Grinder with 1HP Motor including all cost of materials, conveyance, loading, unloading, installation charges, testing, labour charges, etc., complete as directed by the departmental officers. |
| 32 | supply and delivery of 10liter Pressure Cooker including all cost of materials, conveyance, loading, unloading, installation charges, testing, labour charges, etc., complete as directed by the departmental officers. |
| 33 | supply and delivery of Utensils including all cost of materials, conveyance, loading, unloading, installation charges, testing, labour charges, etc., complete as directed by the departmental officers. Utensils |
| 34 | Silver Plates |
| 35 | Silver Tumbler |
| 36 | supply and delivery of 200 Idly Maker including all cost of materials, conveyance, loading, unloading, installation charges, testing, labour charges, etc., complete as directed by the departmental officers. |
| 37 | Repairing and maintenance of Gas Stove for Amma Unavagam including all cost of materials such as removing the old damaged burner, hose pipe and valve, replacing with new burner, ISI marked LPG hose and gas valve including testing, labour charges, leakage checking, cleaning charges, etc., complete as directed by the departmental officers. Please Enable Macros to View BoQ information |
