|
| 1 | Dismantling the damaged flooring ceramic tiles including all cost and conveyance of all other labour charges etc. |
| 2 | Paving the floor with best quality vitrified Tiles of following size and variety conforming IS 15622 with water absorbtion less than 0.08% of approved colour and shade laid over cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer in all floors and the top pointed with Water Resistant Tile Epoxy Grout etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 3 | Self Designed Colour Ceramic Tiles of size 305 x 305 x 6mm |
| 4 | supplying and fixing in position best appored of BIS quality pvc waste water pipes having a pressure of 6kg /sqcm including cost of speical clamps,brass screws, nails etc. |
| 5 | a)63mm dia pipe |
| 6 | b)63mm dia Elbow |
| 7 | c)63mm dia Bend |
| 8 | supplying laying and jointing pvc pipes (having working pressure 10kg /sqcm) of approved quality and best variety conforming to bis of the following dia including cutting threading and fixing pvc speical using pvc adhesives and fixing into wall with teak |
| 9 | a )25mm dia pvc pipe |
| 10 | b)32mm dia pvc pipe |
| 11 | c)32mm dia pvc Elbow |
| 12 | Wiring with 2 x 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with switch box with 5A FT switch inflush with wall and covered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for light point / fan point (for electronic regulator) |
| 13 | Supply and fixing AC Ceiling Fan complete 1200mm (48”) Sweep with 300mm Down Rod (without Regulator) (Higher End) including transport and other charges etc. complete.M-1337 |
| 14 | Supply and fixing4’ 18W Crystal Glass LED Tube Light Fitting with including transport and other charges etc. complete.M-1272 |
| 15 | Supply and providing 1000 litres capacity Priming Tank made up of PVC. |
| 16 | Supply and installation of Perforated Glass Fiber Reinforced (GFR) Gypsum Concealed Acoustics false Ceilings, GFR gypsum panel, backlined with acoustical fleece, having random circular perforations of 8mm dia, 15mm dia and 20mm dia 5% open area having 4x14mm slotted perforations @ 10x20mm pitch, in H8 Pattern 15% open area size 1200x2400x12.5mm, square edge, volume density of base board 650 Kgs/m3, weight 8Kgs/m2 installed by using Strut ceilingframework. The Strut ceiling framework system shallinclude Strut WC25, fully knurled, sectional thickness0.5mm, length 3600mm, unequal flanges of 20 &30mm and web of 25mm, fixed along the perimetersof the wall with nylon sleeves and suitable fastenersat every 300mm centers. Then suspend Strut MC45, fully knurled, sectional thickness 0.8mm,length 3600mm, equal flanges of 15mm and web45mm from the soffit at 1200mm centers with Strut SA25, fully knurled, Suspender angle with sectional thickness 0.45mm, unequal flanges of 25 & 10mm such that free end of Strut MC45 rests on Strut WC25 along perimeter of wall. Extra support to be added near jointing of two MC45 so that end cantilever should not be more than 150mm. Strut CC25, fully knurled, sectional thickness 0.55mm, length 3600mm, web 50mm, depth of 25mm and equal flanges 15mm is fastenedb to the Strut MC45 perpendicularly at 600mm centers for upto RH70, at 400mm centers for RH70-RH90 and at 300mm centers for >RH90 and inserted inside the Strut WC25 at the perimeter Snazz Cosmos panel is installed on the Strut CC25 with suitable fasteners at600/400/300mm centres. The longer edges of panelsshould be perpendicular to length of Strut CC25.All edges should be chamfered for V-Groove 4mmgap should be maintained between adjacent boardson all sides and should be filled and finished withSeam AJC and tape Apply one coat of white primerwith roller brush evenly across the board surfaceto achieve uniform colour. The system is backlinedwith the acoustical infill Synthetic polyfiber 5x50.TechParameters Fire (Class) -1 & P Acoustics - NRCupto 0.75 (For E600” Mounting) Climate (“C, RH)-50,70 Light reflectance (%) - Paint dependent Green(VOC, RC %) -Low, 25 as directed by the departmentofficers. The cost includes, cost of material, cost oflabour, Scaffolding, Transportation, Conveyance Etc.complete complying to standard specication. |
| 17 | Supply and delivery of Mixer Grinder of approved quality including motor unit, jars, blades, lids, power cord and all standard accessories, including transportation, loading, unloading, testing, installation and all other incidental charges, labour charges etc. complete.including GST |
| 18 | Supply of required materials and carrying out repair and maintenance works including transportation, loading, unloading, testing, installation and all other incidental charges, labour charges etc. complete.including GST |
| 19 | Steam pipe line work |
| 20 | Steam Water line Work |
| 21 | Steam Generator 280 lit capacity with Stand |
| 22 | Cooking essenstial Vessels |
| 23 | Gas Pipe line Work |
| 24 | Ro water Plant Please Enable Macros to View BoQ information |
