|
| 1 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : 7.11 Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 2 | Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like. 7.21 Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :(a) 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 4 | Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) : a) Flush/ Ruled pointing |
| 5 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.(a)In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 6 | Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. |
| 7 | Excavation and removal of sludge/ manuare by mechanical transport means excluding 30cm in depth ,1.5m in width as well as 10 sqm on plan including disposal of sludge lead upto 50mtr and lift complete as per direction of engineer -in-charge |
| 8 | Disposal of sludge/manure by mechanical transport i/c loading & unloading lead upto 5.0 km complete as per direction of engineer in charge . |
| 9 | Supplying and stacking at site.a)Good earth |
| 10 | Extra levelling & neatly dressing of disposed soil completely as directed by Engineer-in-charge. |
| 11 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq. mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) |
| 12 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : a) Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 13 | Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete. |
| 14 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to50 m and lift up to 1.5 m.(a)All kinds of soil |
| 15 | Cost after applying correction factor on all item of DSR 2023 on account of GST @0.973 |
| 16 | Add cost index 3 % Please Enable Macros to View BoQ information |
