|
| 1 | Supply of 2/4 Core XLPE Insulated & Sheathed Armoured stranded Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [Make Polycab / RR /KEI/ Havells/ Gloster as approved by E.I.C] 4 Core 35 Sqmm |
| 2 | Laying of cable from 4 core 35 sqmm on wall/ surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting |
| 3 | Supply and fixing compression type gland For 35 sqmm 4core complete with brass gland brass ring and rubber ring for dust and moisture proof entry of XLPE/PVC armoured cable. |
| 4 | Finishing the end of following XLPE/PVC armoured cables bycrimping method incl. supplying and fixing solderless socket(Dowels make), tapes, anticorrosive paste & jointing materials. For 35 sqmm 4core |
| 5 | Supplying and fixing Change over switch with Sheet Steel enclosure on angle iron frame on wall withnuts bolts etc 100A (Havlls/L-K/Siemens/Legrand) |
| 6 | Cost of labour charges for dismantling the existing installations incl LT Panel at G Floor & mending good the damages as to GS with engaging 1 no skill and 2 nos semi skill technicians |
| 7 | Supplying and fixing double door 6 way Vertical TPN MCB Distribution board for 160 A MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment, including Supplying and fixing double door sheet steel (16SWG), powder coated top and bottom end box for TPN DB vertical enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment (Make: Legrand/L K/Siemens)Incoming: 160A, 415V, 35KA FP MCCB-1nosOut going 63A, 415V, 10KA & C curve TPMCB-4 nos100 Amp, 415V, 10KA & C curve TPMCB-2 nos (IPD Building Incommer Panel) |
| 8 | Supplying and fixing double door 6 way Vertical TPN MCB Distribution board for 100 A MCCB incomer with IP-42 /43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Interconnection with suitable size of copper wire and neutral link & provision for earthing attachment, including Supplying and fixing double door sheet steel (16SWG), powder coated top and bottom end box for TPN DB vertical enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment (Make: Legrand/L-K/Siemens)Incoming: 100A, 415V, 35KA FP MCCB-1nosOut going 63A, 415V, 10KA & C curve TP MCB-2 nos 32A, 415V, 10KA & C curve TP MCB-2 nos 6-32A, 240V, 10KA & C curve SP MCB-6 nos( For IPD, OPD Lift ) |
| 9 | Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box andmending good the damages to original finish. - Average run 6 mtr (E-14, 2b) |
| 10 | Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box andmending good the damages to original finishOn Board (E-15 -4a) |
| 11 | Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite / perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. (E/6-21) |
| 12 | Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite / perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required (E/6-22) |
| 13 | Supply & fixing of minimum10-12 Watt LED metal Bulkhead light fittings complete with all accessories having die cast aluminium housing finished in premium white powder coating having minimum luminous efficiency of 100 Lm/ Watt or better & 50,000 LED burning hours or more. [Make- Philips/ Wipro/ Crompton-CIS-306-10-57-SL-DP-NBK/ manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification] |
| 14 | Supply and Delivery of 4 feet Industrial box type twin LED tube fitting incl. Supply & Delivery of 2 no. 240V, 20 W LED Tube (Polycarbonate with heat sink) with glare free light distribution with CCT (5000K-6500K) having minimum luminous efficiency of 105 Lm/ Watt or better & 50,000 LED burning hours or more. [Make- Philips/ Wipro/Lighting Technology/ manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification] |
| 15 | Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. (C/2-17) |
| 16 | Supply & Delivery of 240V, LED flood lights with optic lens and polycarbonate diffuser having following wattage, in white powder coated pressure die cast aluminium housing with IP 66 protection & incl. 10 kV SPD, with glare free uniform illumination with CCT (5700K-6500K) having minimum luminous efficiency of 110 Lm/ Watt or better & 50,000 LED burning hours or more. [Make- Philips/ Wipro/Lighting Technology/ manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification]-150 Watt |
| 17 | Fixing only outdoor / street light type fluorescent light fitting complete with all accessories to be fixed/ projected from the wall of the building incl. making holes to building, S&F 40 mm dia GI pipe (ISI-Medium) 1.50 mts. average length, with GI socket at one end and thread at the other end & suitable bend to house the fitting & making necy. connections with S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall and painting |
| 18 | Supply & Delivery of 220V, Single Phase, 50 Hz A.C heavy duty exhaust fan of following sizes having complete metal body. (Make-EPC/ USHA/Orient CROMTON) [ISI mark, IP55 rated]300 mm (12\\"), 4 Blade, RPM ≤ 950 , Wattage ≤ 55 Watt, Sound level ≤ 46 dB, Air Displacement (In CMH) ≥ 750 |
| 19 | Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: 30 cm (12\\") |
| 20 | Fixing only louver shutter/cowl on wall with necy. bolts & nuts (6 mm dia x 62 mm long)- For 30 cm (12\\") Exhaust fan |
| 21 | Supply & Delivery of 230V, 50Hz, 450 mm sweep heavy duty full metal body wall bracket fan having wattage ≤ 90 Watt, RPM ≤ 1350, Air displacement (In CMM) ≥ 100 complete with all accessories. (Make - Orient/Crompton/ EPC/Cinni) [BEE star rated] |
| 22 | Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length |
| 23 | Supply & Installation of M.S. structure duly fabricated & welded by 25 mm x 25 mm M.S. square hollow bar frame with red oxide duly welded fixing on angle iron frame (40mm x 40mni x 5mm) including 6 nos angle iron support duly painted with red oxide priming and fabricating the same by frust nut arrangement incl. welding & pech chat as per direction of EIC including transportation. Size of the board is (6ft x 2ft), Including i-(ACP) board(7mm thick) of Aludecor / Alstone size: (4' x 4') front an all sides except back side of sign board. ii-Supply & fixing of 24 SWG GI Sheet for covering the back sideiii) S & F water proof 120 watt power supply system IP65, 50Hz frequency, 108 to 305 VAC power supply, >.095 power factor for LED lamp. (Make: Meanwell / Samsung)iv) Supply & fixing of 3 mm thick width good quality Acrylic Sheet Letter as per aproved design. (Matter -BLOOD CENTRE Salt Lake SD Hospital)1) 5 inch long/2\\" Depth letter |
| 24 | Distribution wiring in 1.1 KV single core stranded 'FR'PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR'(Precision make) incl. necy. fittings as required (Page No-E-14/1(a))i)2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC |
| 25 | ii)2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC |
| 26 | Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.(Page No-F-5/9) i)1.5sqmm |
| 27 | ii)2.5sqmm |
| 28 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: (G/1-2a)a)By ISI-Medium GI pipe |
| 29 | Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe (G/2 3a) |
| 30 | Extra for treatment of soil by using salt & charcoal or coke for plate electrode(G/2 3b) |
| 31 | Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required (G/2 4a) |
| 32 | Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required(G/2 4b) |
| 33 | Excavation of soil for installation of Earth Electrode and filling & ramming.(G/1-1a) Please Enable Macros to View BoQ information |
