|
| 1 | SITC of 24Port, Stackable, Layer 3, PoE enabled, with PD: minimum 370 Watt (should have minimum 15.4 Watt per Port), Full managed only, 1RU, GE Switch to be operated on 200-240VAC, 50 Hz Supply, with perpetual license of OEM, having minimum technical specification:a) 24 x 10/100/1000Base-T Mbps PoE+ enabled host ports (Minimum); b) 4 x 10GBase-F SFP with 2 x 10G Multi-Gigabit (1G/2.5G/5G/10G) RJ-45 PoE++ (60 W) uplink ports; c) Forwarding performance/stacking bandwidth/ backplane speed (Minimum) of 125 Mpps; d) Fanless operation with operating temperature up to 50°C; e) DRAM and Flash RAM as per OEM; f) Software support with IPv4 routing (542 routes), multicast routing (IGMP) including necessary software license; g) Minimum switching capacity of 168Gbps; h) Number of VLAN Supported: 64 (Minimum).; i) Total number of MAC Address: 32,000 (Minimum); j) Minimum Security: User privilege management and password protection, DoS attack defense, ARP attack defense, and ICMP attack defense, Binding of the IP address, MAC address, interface, and VLAN, Port isolation, port security, and sticky MAC, MFF, Blackhole MAC address entries, Limit on the number of learned MAC addresses, 802.1x authentication and limit on the number of users on an interface, AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC, SSH v2.0, Hypertext Transfer Protocol Secure (HTTPS), CPU defense, Blacklist and whitelist; Access Security: DHCP Relay, DHCP Server, DHCP Snooping, DHCP Security; k) Others: Applicable standards: IEEE 802.1p: CoS prioritization , IEEE 802.1Q: VLAN tagging, IEEE 802.1X: Port Access Control, IEEE 802.3: 10BASE-T, IEEE 802.3u: 100BASE-T,IEEE 802.3ab: 1000BASE-T, IEEE 802.3z: 1000BASE-X,IEEE 802.3af: Power over Ethernet, IEEE 802.3at: Power over Ethernet Plus, IEEE 802.3x: Pause Frames/Flow Control, IEEE 802.1D: Spanning Tree Protocol, IEEE 802.1s: Multiple instances of Spanning Tree Protocol (MSTP), IEEE 802.1w: Rapid reconfiguration of Spanning Tree Protocol, IEEE 802.3ad: Link Aggregation Control Protocol; l) REGULATORY: RoHS, WEEE, IEC 61000-4-2:2008, CISPR Class, ICES-003 Class A,UL,CSA 22.2,FCC,EN 300 386, CCC, ICES -003, CB. The OEM should have 24x7 TAC support center with India toll free number reflected in official website. Ref. Make: Zyxel, Radwin, Juniper, Extreme, Huawei, Aruba,Warranty: 03 (Three) Years onsite comprehensive OEM warranty with parts and service except force majeure. |
| 2 | SITC of Centralized Controller Depended Dual Band Wireless Access Point with of OEM, having minimum technical specification:AP type: Indoor, dual radio, 5GHz 802.11ax 2x2 MIMO and 2.4GHz 802.11ax 2x2 MIMO, Dual-band radios; 20, 40, and 80 MHz Channels; 5GHz radio: 1.2 Gbps data rates and 2.4GHz radio: 575Mbps on dual concurrent radio operations; Packet Aggregation (AMSDU, AMPDU); Reduced Interface Spacing; Layer 2 and Layer 3 Layer 3 routing, 802.1q, DynDNS, DHCP server/client, BOOTP client, PPPoE and LLDP; Security: Stateful Firewall, IP filtering, NAT, 802.1ax, 802.11i, WPA2, WPA Triple Methodology Rogue Detection: 24x7 dual-band WIPS sensing, on-board; IDS, and secure guest access (hotspot); Quality of Service (QoS) WMM, WMM-UAPSD, 802.1p, Diffserv, and TOS; Operating Channels: 2.4 GHz band: channel 1 through channel 13, 5.2 GHz band: channel 36 through channel 165.Ref. Make: Tp-Link, Ref. Model: EAP660 HD AX3600 or Equivalent of Zyxel, Radwin, Juniper, Extreme, Cambium, Aruba, Zyxel, Licence: 03(Three) Years subscription with 24x7 Comprehensive on-site support and 03(Three) years onsite comprehensive OEM warranty with parts and service except force majeure. |
| 3 | SITC of Basic POE Enabled IP Telephone Set including all Accessories, having minimum technical specification:2.8”240x64-Pixel Color Display; 2 SIP accounts; 9 DSS/BLF keys; HD Voice; Audio Video Codecs: Opus codec, G.722, G.711A-law, G.711µ-law; 2 x Gigabit Ethernet port; 1x USB port; Stand with 3 adjustable angles; Wall mountable; Phone book (200 records); XML/LDAP remote phonebook; Call history: In/Out/missed (60 records); BLF & Message waiting indicator (MWI); Voice mail, call park, call pickup; 4 Line keys; 4 Soft Keys; 7 features keys: message, headset, hold, mute, transfer, redial, hands-free speakerphone; 5 Navigate Keys; Volume+/-; 1 x RJ9 Handset port; 1 x RJ9 Headset port; 1 x Power adapter; PoE; Placement: Base, two different placement angles; wall mountable;Ref. Make: Neron, Ref. Model: NXP 504HD or Equivalent of Avaya, Matrix, Bettel, NEC, Syntel, Signtel, Alcatel, Unify Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. |
| 4 | SITC of Basic POE Enabled IP Telephone Set including all Accessories, having minimum technical specification:2.8”240x64-Pixel Color Display; 2 SIP accounts; 9 DSS/BLF keys; HD Voice; Audio Video Codecs: Opus codec, G.722, G.711A-law, G.711µ-law; 2 x Gigabit Ethernet port; 1x USB port; Stand with 3 adjustable angles; Wall mountable; Phone book (200 records); XML/LDAP remote phonebook; Call history: In/Out/missed (60 records); BLF & Message waiting indicator (MWI); Voice mail, call park, call pickup; 4 Line keys; 4 Soft Keys; 7 features keys: message, headset, hold, mute, transfer, redial, hands-free speakerphone; 5 Navigate Keys; Volume+/-; 1 x RJ9 Handset port; 1 x RJ9 Headset port; 1 x Power adapter; PoE; Placement: Base, two different placement angles; wall mountable;Ref. Make: Neron, Ref. Model: NXP 510HD or Equivalent of Avaya, Matrix, Bettel, NEC, Syntel, Signtel, Alcatel, Unify Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. |
| 5 | SITC of Digital Operator Console Set, having minimum technical specification:4.3\\" 480 x 272px colour IPS screen; 10 SIP accounts; Up to 64 DSS/BLF keys; HD Voice; Opus Codec; Stand with 3 adjustable angles; 2.4GHz Wi-Fi inbuilt; 5GHz Wi-Fi using Wi-Fi dongle; Wall mountable; Phone book (2000 records); XML/LDAP remote phonebook; Call history: In/Out/missed (60 records); BLF & Message waiting indicator (MWI); Voice mail, call park, call pickup; 10 Line keys (touchable; 3 features keys: headset, mute, hands-free speakerphone; 4 soft keys (touchable); Volume+/-; 1 x RJ9 Handset port; 1 x RJ9 Headset port; 1 x Power adapter; 1 x USB 2.0 port; PoE; Placement: Base, two different placement angles; wall mountable;Ref. Make: Neron, Avaya, Matrix, Bettel, NEC, Syntel, Signtel, Alcatel, Unify Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. |
| 6 | SITC of 10 Gbps Multi Mode Small Form-Factor Pluggable Plus Transceiver Module having minimum technical specification:Form Factor: SFP+ (Small Form-Factor Pluggable Plus); Data Rate: 10 Gbps (10G Ethernet); Wavelength: 850 nm (transmit and receive range 840 to 860 nm); Media Type: Multimode Fiber (MMF); Connector: Duplex LC; Max. Cable Distance: Up to 400m (on OM4 fiber), 300m (on OM3 fiber), or 26m (on FDDI-grade MMF); Operating Temperature: Commercial (COM) range: 0 to 70°C (32 to 158°F); Power Consumption Typically: 1 W; DDM/DOM Support: Yes (Digital Diagnostics Monitoring); Standards Compliance: IEEE 802.3ae 10GBASE-SR, SFP+ MSA SFF-8431, SFF-8472; Ref. Make: Cisco, Ref. Model: SFP-10G-SR= or Equivalent of Juniper, Extreme, HPE (Aruba)Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. |
| 7 | SITC of Networking Horizontal unArmoured Category 6A F/UTP Cable, having minimum technical specification:Type: ANSI/TIA-568-C.2 Category 6A F/UTP Cable; Application: Category 6A System shall meet and exceed the transmission requirements of ANSI/TIA-568-C.2 and ISO/IEC 11801 Class EA; Material: Conductors: 23 AWG solid bare copper or better; Insulation: Polyolefin; Dielectric Strength, minimum: 1500 Vac, 2500 Vdc; Jacket: LSZH as per IEC 61034-2, IEC 60332-1 and IEC 60754-2; Pair Separator: Cross-member (+) Fluted Spline. Each pair should be twisted in different lays; Shielding: Aluminium Foil Shielded. Polyester tape encapsulating the 4 pairs beneath the AL Foil; Solid Drain wire (26 AWG) and Rip cord to be integrated in the cable; Cable OD: Not more than 7.2 mm; Operating temperature: -20 Deg. C to +60 Deg. C; Criteria: OEM should be a member of TIA committee. Membership shall be available for verification at www.tiaonline.org/about/member-list; Manufacturing: Should be ISO9001 and ISO14001 certified for design, Development for LAN & WAN product; Compliance: Must be RoHS 2011/65/EU compliant; Packing: Box of 305 meters; Ref. Make: Commscope, Simon, Panduit, Leviton, Beldan, CorningWarranty: 03 (Three) years onsite comprehensive OEM warranty including parts, and service except force majeure. |
| 8 | SITC of CAT6A STP Die-Cast Jack with dust cover, 180° cable exit Faceplate and Backbox, having minimum technical specification:Jack: Type: CAT6A Modular Shielded RJ45 Jacks shall meet and exceed channel specification of ANSI/TIA-568.2-D and ISO/IEC 11801 Class EA; Application: Shall support 4-Pair PoE (90W) as per IEEE 802.3bt; Flammability: UL 94V-0 rated; Modular Jack Housing: Zinc Alloy; Contact material: Beryllium copper base with 1.27um Gold plated; Termination procedure: Shielded jack should support uniform hassle free termination technology and be able to ensure termination of all 4 pairs in single punch-down. Jacks should have inherent cable strain relief mechanism to secure each termination. The termination contacts should be protected from dust and cable tensions once terminated. The modular jacks should contain integrated cutting blades used during termination to allow all four pairs of a four pair cable to be terminated at one time; Wiring Pattern: T568 A and B; Shall accept solid or stranded conductors with a maximum insulation diameter of 1.60 mm and cable OD of upto 8.50mm; Cable types: Shall be able to terminate all types of shielded cables including F/UTP, F/FTP and S/FTP; Electrical parameters: Shall comply with IEC 60512-99-002 specifications for un-mating under electrical load; Current rating 1.5A; Di-electric withstand voltage 1500 Vac; Insulation resistance, min 500 mOhm; Performance certification: Shall be Intertek / ETL certified under 4 connector 100m channel for CAT6A transmission compliance as per ANSI/TIA 568.2-D, ISO/IEC 11801 and EN 50173 standards; Operating Temperature: -10° to 60°C; Mating Durability: Shall support IEEE 802.3bt Type 4 (90 W) application upto 3000 plug to jack mating cycles; Compliance: RoHS compliant; Relative humidity: Upto 95% non condensing; Identification: Shall be available in min 8 different colors for ease of identification of circuits;Face Plate:Type: Single Gang shuttered, square faceplate, White; Material: ABS, UL 94 V-0; No. of ports: One; Approvals: UL listed; ROHS Compliant: ROHS/ELV Compliant; Ref. Make: Commscope, Simon, Panduit, Leviton, Beldan, CorningWarranty: 03 (Three) years onsite comprehensive OEM warranty including parts, and service except force majeure. |
| 9 | SITC of 24 Port Modular CAT6A STP Shielded Fully Loaded Jack Panel with integrated rear cable manager, having minimum technical specification:Jack: Type: CAT6A Modular Shielded RJ45 Jacks shall meet and exceed channel specification of ANSI/TIA-568.2-D and ISO/IEC 11801 Class EA; Application: Shall support 4-Pair PoE (90W) as per IEEE 802.3bt; Flammability: UL 94V-0 rated; Modular Jack Housing: Zinc Alloy; Contact material: Beryllium copper base with 1.27um Gold plated; Termination procedure: Shielded jack should support uniform hassle free termination technology and be able to ensure termination of all 4 pairs in single punch-down. Jacks should have inherent cable strain relief mechanism to secure each termination. The termination contacts should be protected from dust and cable tensions once terminated. The modular jacks should contain integrated cutting blades used during termination to allow all four pairs of a four pair cable to be terminated at one time; Wiring Pattern: T568 A and B; Shall accept solid or stranded conductors with a maximum insulation diameter of 1.60 mm and cable OD of upto 8.50mm; Cable types: Shall be able to terminate all types of shielded cables including F/UTP, F/FTP and S/FTP; Electrical parameters: Shall comply with IEC 60512-99-002 specifications for un-mating under electrical load; Current rating 1.5A; Di-electric withstand voltage 1500 Vac; Insulation resistance, min 500 mOhm; Performance certification: Shall be Intertek / ETL certified under 4 connector 100m channel for CAT6A transmission compliance as per ANSI/TIA 568.2-D, ISO/IEC 11801 and EN 50173 standards; Operating Temperature: -10° to 60°C; Mating Durability: Shall support IEEE 802.3bt Type 4 (90 W) application upto 3000 plug to jack mating cycles; Compliance: RoHS compliant; Relative humidity: Upto 95% non condensing; Identification: Shall be available in min 8 different colors for ease of identification of circuits;Panel:Type: 19” 24-port, Unloaded shielded Jack panel, Straight, integrated with rear cable manager; Port arrangement: Modules of 6-ports each, arranged 1port x 6; Category: Should accept modular CAT6A shielded outlets, available in multiple color options; Port Identification: 9mm or 12mm Labels on each of 24-ports (to be included in supply); Grounding: Shielded panel must have integrated grounding strip and lugs; Flammability: UL 94V-0 rated; Material: High-impact, flame retardant, thermoplastic; Panel: Black, powder coated steel; Safety rating: UL listed; Manufacturing: Shall be design and manufactured in ISO 9001:2015 facility; Relative humidity: Up to 95%, non-condensing; Packaging: Re-cycled material, Environment friendly, single-use plastics-free packaging; Ref. Make: Commscope, Simon, Panduit, Leviton, Beldan, CorningWarranty: 03 (Three) years onsite comprehensive OEM warranty including parts, and service except force majeure. |
| 10 | SITC of CAT6A 4-Pair, S/FTP, LSZH, Patch Chord Cable, 23 AWG Solid Bare Copper Conductors With RJ45 Connector at Both End 1 Mtr Length, having minimum technical specification:Length: 01Mtr; Type: Shielded Twisted Pair, PiMF, compliant to 10 Gb/s transmission as per ANSI/TIA 568.2-D, IEEE 802.3bt (type 4) and ISO/IEC 11801 CAT6A; Conductor: Stranded copper conductors encapsulated within metallic foil shield; Construction: The cable construction of 4 stranded twisted pairs, individually shielded, under an overall braided; screen (S/FTP) under an LSZH jacket; Plug Protection: Transparent slim snag-less, elastomer polyolefin boot; Plug mating cycle: Min 3000 cycles under POE load; Wiring pattern: T568-B; Compliance: Tested under 4 connector channel for upto 100m for IEEE 802.3bt 4PPoE transmission at upto 60 Deg C; Voltage rating: 300V or better; Plug Housing: Clear polycarbonate; Current rating: 1.5A; Insulation resistance, min: 500 mOhm; DC resistance: <0.3 Ohm; Plug compliance: Shall comply with the un-mating under electrical load requirements as per IEC 60512-99-002 standard; Performance certification: Shall be Intertek / ETL certified for transmission of CAT6A application as per ANSI/TIA 568.2-D, ISO/IEC 11801 and EN 50173 standards under 4 connector 15m and 100m channels; Jacket color: Shall be available in min 8 jacket colors for ease of identification; Cable Diameter: 6.0 +/- 0.3 mm; Operating temp: -20 0C to +60 0C; Ref. Make: Commscope, Simon, Panduit, Leviton, Beldan, CorningWarranty: 03 (Three) years onsite comprehensive OEM warranty including parts, and service except force majeure. |
| 11 | SITC of CAT6A 4-Pair, S/FTP, LSZH, Patch Chord Cable, 23 AWG Solid Bare Copper Conductors With RJ45 Connector at Both End 2 Mtr Length, having minimum technical specification:Length: 02Mtr; Type: Shielded Twisted Pair, PiMF, compliant to 10 Gb/s transmission as per ANSI/TIA 568.2-D, IEEE 802.3bt (type 4) and ISO/IEC 11801 CAT6A; Conductor: Stranded copper conductors encapsulated within metallic foil shield; Construction: The cable construction of 4 stranded twisted pairs, individually shielded, under an overall braided; screen (S/FTP) under an LSZH jacket; Plug Protection: Transparent slim snag-less, elastomer polyolefin boot; Plug mating cycle: Min 3000 cycles under POE load; Wiring pattern: T568-B; Compliance: Tested under 4 connector channel for upto 100m for IEEE 802.3bt 4PPoE transmission at upto 60 Deg C; Voltage rating: 300V or better; Plug Housing: Clear polycarbonate; Current rating: 1.5A; Insulation resistance, min: 500 mOhm; DC resistance: <0.3 Ohm; Plug compliance: Shall comply with the un-mating under electrical load requirements as per IEC 60512-99-002 standard; Performance certification: Shall be Intertek / ETL certified for transmission of CAT6A application as per ANSI/TIA 568.2-D, ISO/IEC 11801 and EN 50173 standards under 4 connector 15m and 100m channels; Jacket color: Shall be available in min 8 jacket colors for ease of identification; Cable Diameter: 6.0 +/- 0.3 mm; Operating temp: -20 0C to +60 0C; Ref. Make: Commscope, Simon, Panduit, Leviton, Beldan, CorningWarranty: 03 (Three) years onsite comprehensive OEM warranty including parts, and service except force majeure. |
| 12 | SITC of 15U Double Section Wall Mount Rack, having minimum technical specification:15U x 550(W) x 600(D) Wall Mont Network Rack - CKD/NRS1/ Wall Mount Rack Frame with Front Glass Door with Single point swing handle Lock Door, Back Perforated Dual Door with three Point Swing Handle Lock, Vented Side Panels, Top-Bottom, Castors Wheels, Leveler Sets, 19\\" Adaptor Kit;Basic Frame: Steel; Construction: Welded; Top & Bottom Cover: Welded to Frame with Cable entry exit cut outs; Front Door: Lockable Toughened Glass Door; 19” Mounting Angle: Formed Steel; Std. Equipment Mounting: DIN Std. 10mm Sq. Slots; Standard Finish: Powder coated; Standard Colour: Grey & Off White OR Black; Rack Standard: Conforms to DIN 41494 or equivalent standard; Static Load: 30Kg; Accessories: Cable Organisers, Power Distribution Units, Shelves, Cooling Fans, Rack ground Kit. 01no x 90 CFM 2 Unit Aircirculation Fan Tower Mount; 01no x Power Distribution Unit 6 Socket 5/15Amp With 01no 16Amp MCB, 230 Volt along Input Cable; 02set x Mounting Hardware Screw (Pack of 20); Ref. Make: Tata, Vertiv, Legrand, Netrack, Valrack, Rittal, APW, MRSWarranty: 03 (Three) years onsite comprehensive OEM warranty including parts, and service except force majeure. |
| 13 | SITC of Multi Mode Duplex Fiber Optic Light Interface Unit, 24F, 1U Drawer shelf, Fully loaded with LC, OM3 Pigtails, Adapters, Splice Trays, Fiber Management Rings and Splice Slvees, having minimum technical specification:Fiber Management shelf: Shall be fully loaded and factory fitted shelf enclosure with no assembling required during installation at site; Capacity: 1U: 48 Fiber terminations (for LC type); Configuration: Shall be supplied pre-loaded with LC duplex adapters, LC Pigtails, splice trays and fiber management rings; Cable entry: Min 4 cable entry points at rear of shelf, protected with rubber grommets; Mounting options: Shall be 19” rack-mountable with option of mounting brackets in different positions; Access to tray: Shall have easy access to splicing tray and connectors; Controlled sliding: Should have front locking latches on both side of shelf for protective sliding; Accessories: Fiber management guides, secure tie downs and all splicing accessories, Pre loaded with labeling strips, 2 grounding lugs, Sealed cable inlets for dust and rodent protection; Material: Min 1.6mm CRCA Sheet steel with powder coating; Fiber / buffer tube storage: Min of 320 mm depth for fiber slack storage; Pigtails loaded in Shelf: Type: LC Type, SM 1.5 Mtr; Attenuation: <=0.3 dB, at 850 nm; Return Loss: >= 45 dB; Ref. Make: Commscope, Simon, Panduit, Leviton, Beldan, CorningWarranty: 03 (Three) years onsite comprehensive OEM warranty including parts, and service except force majeure. |
| 14 | SITC of 3Mtr, 10Gb Duplex Multi Mode 50/125, OM3, LSZH, LC-LC, Armoured Fiber Optic Patch Cord, having minimum technical specification:Length: 3Mtr; Type: LC/UPC to LC/UPC Duplex tuned Fiber Optic Patch Cord complaint to ICEA S-87-596 and Telcordia GR 409; Standard: ITU-T G.652.D and ITU-T G.657.A1 Bend Insensitive Multi-mode OM3 Fiber; Sheath: LSZH yellow colored sheath; Cable Diameter: 1.6 mm duplex cord; Tensile rating: 170N or better; Flame Test Listing: NEC OFNR-LS (ETL) listed; Flame test compliance: IEC 60332-3, IEC 61034-2 and IEC 60754-2; UL Listings: Shall be UL 1666 and UL 1685 compliant; Insertion Loss: <0.30 dB; Return Loss: > 50 dB; Temperature Range: -10 Degree C to +60 Degree C; Safety Compliance: ROHS & EN 50575 Compliant; Approval: Shall be ETL/Intertek certified; Ref. Make: Commscope, Simon, Panduit, Leviton, Beldan, CorningWarranty: 03 (Three) years onsite comprehensive OEM warranty including parts, and service except force majeure. |
| 15 | Supply and Laying of PVC conduits(ISI marked) or PVC Casing laying through surface with all accessories as required for the entire system with all OEM accessories. (Quality: MMS; Ø=25mm)Ref. Make: Precision, Presto Plast, Supreme, Oriplast; Quality : ISIWarranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. |
| 16 | SITC of Single Phase UPS Power Point to Network Racks, etc at different location through suitable power networking with 1.5/2.5/4 Sq mm 3 core FRLS PVC insulated unarmoured ISI marked copper cable as per site requirement), 6A/16A Sockets with Separate 6A/16A Switch and 6A/16A MCB mounted in 16SWG GI box with Bakelite top cover complete. Number of power point as per site requirment and as per direction engineer-in-charge.Ref. Make (Switch, Sockets & MCB): Legrand, Hager, SIEMENS, L&TRef. Make (Wire): Polycab, Mescab, Havells, FinolexWarranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. |
| 17 | ADD GST @18% |
| 18 | ADD LWC @1% Please Enable Macros to View BoQ information |
