Tender For Work Of Repair And Maintenance (Fabrication/Mechanical Job) Related To Maintenance Of Pipe Line And Pump Houses Etc. Under Jurisdiction Of Dn Beawar At Annual Rate Contract Basis, Ajmer-Rajasthan
TDR : 55707646
Tender Notice
Corrigendum Details
BOQ
10 Days Left
Ajmer
Rajasthan
Corrigendum : Tender For Work Of Repair And Maintenance (Fabrication/Mechanical Job) Related To Maintenance Of Pipe Line And Pump Houses Etc. Under Jurisdiction Of Dn Beawar At Annual Rate Contract Basis
Name of Work:- WORK OF REPAIR AND MAINTENANCE (FABRICATION/MECHANICAL JOB) RELATED TO MAINTENANCE OF PIPE LINE AND PUMP HOUSES ETC. UNDER JURISDICTION OF DN BEAWAR AT ANNUAL RATE CONTRACT BASIS
Sl. No.
Item Description
1
Turning of various sizes of CID Joints Class- 10/ 15 Complete set (Labour Charges), The Joints will be supplied by the Junior Engineer concern of Department and carting to workshop and after turning of these joints, firm is liable to transport upto Junior Engineer concern's store own his cost.
2
80 mm dia
3
100 mm dia
4
125 mm dia
5
150 mm dia
6
200 mm dia
7
250 mm dia
8
300 mm dia
9
350 mm dia
10
400 mm dia
11
Threading on GI Pipes different diameter as below (Rate Per Mouth Threading). The Pipes will be supplied by the Department and carting to workshop and after threading of these pipes, firm is liable to transport upto Junior Engineer concern's store own his cost.
12
32 mm
13
Cutting of GI/MS/CI Pipes of any class as below (Rate per Mouth- One cutting only making two pieces). The Pipes will be supplied by the Department.
14
32 mm
15
Welding on M.S. / G.I./CI Pipes and other material by Electric Welding, this includes all the material like welding rods/ equipment like welding machine/ generater, if required for job.
16
At Workshop
17
On Site
18
Providing, Fabrication of Mild Steel Plane Ended/ Flanged Specials like Tees, Bends, Reducers, Enlargers, Plugs, Tail Pieces and Blank Flange made from MS pipes, MS sheet strip and MS Sheet of required sizes by welding, cutting and treading as per site conditions and as directed by the Engineer- In- Charge complete in all respect.
19
Making Hole (only labour charges) by drill machine in MS/ CI/ DI Pipes and Specials. per hole rate
20
Up to 12 mm) dia. Hole
21
Above 12 mm dia. Hole.
22
Supplying of MS Rods for different sizes of sluice valve and should be supplied as according to size of old rods including material and finishing for the following sizes.
23
Sluice Valve Size 80mm
24
Sluice Valve Size 100mm
25
Sluice Valve Size 125mm
26
Sluice Valve Size 150mm
27
Sluice Valve Size 200mm
28
Sluice Valve Size 250mm
29
Sluice Valve Size 300mm
30
Sluice Valve Size 350mm
31
Sluice Valve Size 400mm
32
Supplying of Check Nut for different sizes of sluice valve and should be supplied as according to size of Check Nut including material for the following sizes.
33
Sluice Valve Size 80mm
34
Sluice Valve Size 100mm
35
Sluice Valve Size 125mm
36
Sluice Valve Size 150mm
37
Sluice Valve Size 200mm
38
Sluice Valve Size 250mm
39
Sluice Valve Size 300mm
40
Sluice Valve Size 350mm
41
Sluice Valve Size 400mm
42
Providing of U Plate (U Stand) for different sizes of sluice valve and should be supplied as according to size of old U Plate including material for the following sizes.
43
Sluice Valve Size 80mm
44
Sluice Valve Size 100mm
45
Sluice Valve Size 125mm
46
Sluice Valve Size 150mm
47
Sluice Valve Size 200mm
48
Sluice Valve Size 250mm
49
Sluice Valve Size 300mm
50
Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
