|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: MR. Anukaran J Kandir, Senior Manager (Contract), GRSE Limited ITEMS : FOUNDATION WORK FOR INSTALLATION OF 10 TON TOWER CRANE (01 No.) AT GRSE-KPDD UNIT, KOLKATA E-Tender No.: SCC/AJK/OT(W)/TOWER CRANE/KPDD/051/ET-3456 Date: 27.05.2026 Name of the Bidder/ Bidding Firm / Company : PRICE BID : ANNEXURE C(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender.)NB: (i) UOM=Unit of Measurement; ii) sqm. = square meter, iii) Cum - Cubic Meter iv) Nos.- Numbers v) EA- Each vi) MT-Metric Ton vii)Qntl- Quintal NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Job Description(B) Item No. QUANTITY(C) UOM(D) Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency UNIT RATE (INR)WITHOUT GST(E) GST PERCENTAGE(%)(H) GST VALUE (INR)(I) = (F) * (H) Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies HSN / SAC Code * Name of Supply State / UT DRGS NO. Name of Supply State / UT Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category SAC(G) Name of Supply State / UT AMOUNT WITHOUT GST(F)= (C) *(E) AMOUNT INCLUDING GST(J) = (F) + (I) TOTAL AMOUNT In Words |
| 2 | Detail survey of construction site along with the design,drawing and detailing of the following:i) G.A Drawingii) All Civil foundation design, drawing and detailing iii) Vetting of final design & drawing from IIEST/JU/IIT (All drawing should be submitted both in hard and soft copies along with PDF & Auto Cad files) |
| 3 | Soil investigation consisting with subgrade CBR, soil characteristics, index property of soil, permeability, proctor test, field compaction test, Sub soil exploration of 150mm dia conducting standard penetration test as per IS 2131-1981(minimum 3 bore hole) |
| 4 | Providing Bored Cast-in-situ R.C.C.pile in position as per specifications in all kinds of soil including cost of boring using drilling mud to stabilize the bore and flushing the bore of excess mud with freshly prepared drilling fluid by using pumps including bentonite wash prior to placing concrete by tremie pipe in one continuous operation and including the cost of all material sand labour for placing of concrete and also including the cost of mobilization and hire charges of all equipment necessary for boring, welding of reinforcement cage as necessary and lowering of reinforcement cage , preparation and placing of concrete, including the cost of concrete but excluding the cost of reinforcement and labour for bending binding etc. complete as per Drawing and Technical Specifications and removal of excavated earth with all lifts and lead upto 1000m. Work to be executed as per IS:2911 (Part II Sec 2).Using hydraulic piling rig Pile diameter - As per design |
| 5 | Performing Vertical load test on single Pile in accordance with IS:2911(Part-IV) by hydraulic jacks on pile/piles with 1.5 times the design load including preparation of the head of piles with concrete of required strength for receiving the jacks with all ancillary arrangements for setting up gauges, construction of suitable platforms, keeping the loads and dismantling and removing all arrangement etc. complete as per IS specification and direction of Engineer-in-charge Testing load up to 100 T. |
| 6 | Providing MS casing pipe around RCC cast-in-situ bored piles of different diameters in position including cost of all materials, fabrication, handling etc. complete as per direction of Engineer-in-Charge. |
| 7 | Earth work in excavation including cleaning away vegetation, surbs, etc. if any, for foundation, trenches, drains in earth, soil of all types (ordinary /hard soil) in both dry and wet conditions, sand, gravel and soft murum, including dewatering, dressing of sides and ramming of bottom and remonal of excess earth/soil etc. all complete as specified and as directed.(Mode of measurement shall be nett as per drawing). |
| 8 | Bailing or pumping out water from foundation trenches. |
| 9 | Removal of mud/sludge/slurry/liquid earth obtained during piling work from the working site and disposal of the same beyond the KMC/Municipal or any suitable area with conformity of Municipal Corporation Rules using tanker including loading and unloading the same with pump, clearing the site complete in all respect as directed. |
| 10 | Supplying ready mixed concrete of M 30 Grade with well graded stone chips of 20 mm nominal size containing designed quantity of cement per Cu.m of wet concrete produced in computerised batching plant under controlled condition using approved super plastisizer, designing concrete mix following I.S. 10262 and I.S. 456, transporting the mix with agitation in transit mixer to work site depositing the mix on a platform erected for the purpose at required levels of concreting and then placing the mix in its final location of form work, compacting and curing the same complete as per specification & direction of the Engineer-in-charge including computerised batching plant transit mixer with all accessories vibrators etc. inclusive of all other incidental charges in this connection complete With approved concrete pump For Pile Cap |
| 11 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. |
| 12 | Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars |
| 13 | Dismantling all types of masonry exceptingcement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. |
| 14 | Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal/Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as directed. |
| 15 | Surface Dressing of the ground in any kind of soil including removing vegetation, surbs |
| 16 | Earth work in filling in foundation trenches/plinth /pit with good earth, in layers not exceeding 150 mm. |
| 17 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. |
| 18 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand |
| 19 | Brick work with 1st class bricks in cement mortar (1:4) |
| 20 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) |
| 21 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominal size) excluding shuttering and reinforcement as per relevant IS codes. |
| 22 | Providing, erecting & fixing in position steel /ply board 9 to 12 mm shuttering at all locations for all shapes etc in all complete including proping, deshuttering of the same after specified period without damaging the concrete works as directed by Engineer-incharge, etc. Providing and applying approved form oil on all surfaces of formwork coming in contact with concrete as per specifications and drawings and as directed . |
| 23 | Supplying tor steel reinforcement (of approved manufacturer) of tested quality of any diameter upto 32mm dia Fe 500 confirming to IS:1786 for reinforced concrete work in all sorts of structures at all depth and height including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. |
| 24 | Supplying and laying Polythene Sheet (150gm / sq.m.) |
| 25 | To ensure proper bonding between old and new concrete application of Epoxy based, two component structural bonding agent |
| 26 | M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections,hollow section conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-in-charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as , labour insurance charges etc.For built up sections / srtuctural members of specified sectionsweighing not less than 22.5 Kg./m |
| 27 | Labour for hoisting and placing in proper position departmental R.S. joists, channels, angles. Tees, plates ,anchor bolt or any other MS structure including fitting and fixing same with bolts and nuts, if necessary |
| 28 | Labour for Chipping of concrete surface before taking up CONCRETEING/Plastering work |
| 29 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering |
| 30 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc |
| 31 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured |
| 32 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification |
| 33 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality |
| 34 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface |
| 35 | Stripping off worn out plaster and raking out joints of walls, celings etc. |
| 36 | Cutting chase upto 125 x 150 mm. and subsequent mending of damage, in concrete wall |
| 37 | Cleaning the concrete surface by removing dirt and debris, marking defective locations and removing loose concrete by careful |
| 38 | Applying 2 coats of Non-Toxic Acrylic Polymer modified Paint having adhesive & waterproofing properties by mixing in proportion (1 liquid: 4 cementitious material) |
| 39 | Uprooting and removing plants from the surface of walls parapet etc and making good damages Large plant of girth of exposed stem above 150 mm. but not exceeding 225 mm. lift upto 6 mtr Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
