|
| 1 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to be paid separately). |
| 2 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25 mm with two chromium plated brass brackets fixed withC.P. brass screws and PVC sleeves etc., wherever necessary complete,25 mm dia : DSR 9.46.3 |
| 3 | Providing and fixing cup board shutters with 25mm thick veneered particle board IS : 3097 marked exterior grade (Grade I) of approved make including IInd class teak wood lipping of 25mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of Engineer-in-Charge. |
| 4 | With decorative veneering on one side and commercial veneering on other side. |
| 5 | Providing and fixing brass curtain rods of wall thickness 1.25mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. |
| 6 | Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete . |
| 7 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : |
| 8 | with ISI marked M.S. pressed butt hinges bright finished of required size - Second class teak wood |
| 9 | With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) |
| 10 | Providing & fixing oxidised M.S. sliding door bolts ISI marked with nuts and screws etc complete. (a) 250mm x 16mm . |
| 11 | INTERNAL PLUMBING WORKS |
| 12 | Providing and fixing water closet squatting pan ( Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS:7231, Parryware/ Hindware/ Seabird/ Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. |
| 13 | White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests |
| 14 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, Parryware/ Hindware/ Seabrid /Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : |
| 15 | W.C. pan with ISI marked black solid plastic seat and lid |
| 16 | Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15 mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standerd pattern including cutting & making good the walls wherever required. |
| 17 | a)White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 18 | Providing and fixing unplasticised PVC connection pipe with brass unions |
| 19 | 45 cm length |
| 20 | 15 mm nominal bore |
| 21 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 |
| 22 | a) 15 mm nominal bore |
| 23 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 24 | Semi rigid pipe |
| 25 | 32 mm dia |
| 26 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 27 | a) 15 mm nominal bore |
| 28 | Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931 |
| 29 | a) 15 mm nominal bore |
| 30 | INTERNAL ELECTRIFICATION WORKS |
| 31 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. |
| 32 | Group C (DSR Code 1.1.3 Rs. 1823/- x 1.0633 x 0.973 = 1886.05/-) |
| 33 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. |
| 34 | 6 Module (200mmX75mm) ( DSR 1.27.4 @ Rs. 402/- x 1.0633 x 0.973 = 415.90/-) |
| 35 | 12 Module (200mmX150mm) ( DSR 1.27.6 @ Rs. 547/- x 1.0633 x 0.973 = 565.92/-) |
| 36 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. ( DSR 1.26 @ Rs. 40/- x 1.0633 x 0.973 = 41.38/-) |
| 37 | Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V \\"C\\" curve DP MCB complete with connections, testing and commissioning etc. as required. ( DSR 2.16 @ Rs. 1159/- x 1.0633 x 0.973 = 42.53/-) |
| 38 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 39 | 5/6 amps switch (DSR Code 1.24.1 Rs. 103/- x 1.0633 x 0.973 = 106.56/-) |
| 40 | 3 pin 5/6 amp socket outlet (DSR Code 1.24.4 Rs. 122/- x 1.0633 x 0.973 = 126.22/-) |
| 41 | 15/16 amp switch ( DSR 1.24.3 @ Rs. 156/- x 1.0633 x 0.973 = 161.39/-) |
| 42 | 6 pin 15/16 amp socket outlet ( DSR 1.24.5 @ Rs. 197/- x 1.0633 x 0.973 = 203.81/-) |
| 43 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 44 | Double pole ( DSR 2.10.3 @ Rs. 656/- x 1.0633 x 0.973 = 678.69/-) |
| 45 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. (DSR Code 1.25 Rs. 369/- x 1.0633 x 0.973 = 381.76/-) |
| 46 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. |
| 47 | Supply and fixng of 1200 mm sweep Ceiling fan ISI marked complete with fan down rod of required size |
| 48 | Supply, installation, testing and commissioning of surface mounted square shape luminaries with high transitivity diffusers for indirect light of size 1ft x 1ft (normal size) having 12-15 watt with CRCA housing with lumen efficacy of minimum 100 lumen/watt, color temp- 5700 K , P.F+>0.95 CRI > 80, Life 50,000 Hrs i/c connection with 3X1.5 Sq mm FRLS PVC insulated copper conductor cable etc. complete as required. (Make:- Lighting Technologies Model No. PRF0001557NDWEPC01 Or Equivalent in Philips / Regent) |
| 49 | Supplying, Installation, Testing and Commissioning of of 5 Amp Indicator Red light complete with connection etc. complete as required. |
| 50 | Supply of 1200 mm minimum 3 Star rated Energy efficient electric ceiling fan , capacitor type with minimum 300 RPM and 215 air delivery capacity i/c 300 mm down rod, canopies, three numbers blades made of Aluminium alloy, but without speed regulator, suitable for single phase AC, 220-240 volts 50 Hz, supply with 3 x 1.5 Sq.mm. complete with all accessories etc. as reqd. (Make:- Havells Model No. ES-40 or equivalent Model in Orient /Crompton/Usha ) |
| 51 | SITC of Flexible LED strip light complete with Triangle aluminium profile and Opal Diffuser mounted luminiare having rating of 15W/mtr, colour temprature 4000 K, Colour tolerance 3 SCDM to avoid color deviation, lumen output of minimum 1250 lumen, IP-20 rated, life of 50000 hrs & L70 complied having size W*H - 16*18mm i/c connection etc. complete as required. |
| 52 | Supplying, Installation, Testing and Commissioning of Batten LED Bulb |
| 53 | 18% GST Please Enable Macros to View BoQ information |